Power Saws

Tungsten Carbide Tipped (TCT) Multi Purpose hole saws feature a unique tooth set for an ultra-aggressive, high performance cutting of non-metallics. Rapid, heat-free stock removal of wood, MDF, plastics, and ceramic tiles, with a 54mm (2.1/8") cutting depth. Power through wood, MDF, plastics, plasterboard and ceramic wall tiles up to five times faster than a bi-metal hole saw. Carbide Tipped teeth for outstanding cutting performance and product durability. Cutting depth of 54mm (2.1/8”). Smooth cut with minimal heat build up. Suitable for use in mains and battery powered tools. Special arbors featuring extended length pilot drills are availableTeeth per Inch (25mm): 1Teeth Type: Tungsten Carbide Ti…

High performance hole saws for drilling small diameter holes in non-metallics. The ideal solution for the toughest cutting situations. Featuring a diamond coated cutting edge permanently bonded to a tough steel body, the Starrett Diamond Grit hole saw provides the necessary clearance for cutting at high speeds. Rapid cutting solution for non-metallics. Small diameter hole saws are perfect for kitchen and bathroom installations. Smooth surface finish, ideal when cutting glass and ceramics. Supported by a comprehensive range of arbors with carbide tipped pilot drills. The ultimate hole saw for hard-to-cut materialsTeeth Type: Synthetic diamond gritCountry of Origin: CN Specifications: Diameter …

Ideal for cutting stainless and high alloy steels, non-ferrous light metals and reinforced fabrics, all at a much faster speeds than bi-metal hole saws. Perfect for production cutting and particularly suitable for use in drills with limited speed control.• Split-point drill for faster penetration and self-centring • Ideal for production cutting, and particularly suitable for use in drills with limited speed control • Fitted with ejector spring for easy core removal • Step drill for faster cuts in thinner materials • Tungsten carbide tipped teeth provide superb product life and cutting performance • Safety stop at the base of the hole saw prevents drilling beyond the maximum cutting depth of 13m…

The Deep Cut Bi-Metal Hole saws combine the aggressive tooth form from our previous Dual Pitch Hole Saws, with the new extra cobalt HSS teeth to provide enhanced heat and wear resistance. Featuring a 10mm increase in hole saw depth and aggressive material penetration and kerf clearance, it is the complete multi-purpose hole saw to penetrate deep into metals, wood, plastic, plaster and other materials. Aggressive material penetration and kerf clearance. Ideal for solid materials or tubes of a wall thickness greater than 3mm. 51mm hole saw depth improves cutting performance on tubes, particularly where there is a need to cut through both sides of the tube. New tooth material for enhanced heat …

The IRWIN bi-metal holesaws have been designed for the professional and made to provide long-lasting performance for use in general construction, electrical installation, plumbing, heating and ventilation, and remodelling applications. The sharp, variable tooth (4-6 pitch) design provides a faster cutting action and enhanced performance in a variety of materials and cutting applications. The bi-metal construction and the electron beam welded teeth give the user a stronger, longer-lasting blade. The IRWIN holesaw range is available from sizes 14 mm (9/16in) to 152 mm (6in), with a line up of high-quality arbors and a pilot drill to cover all application requirements. Cuts a variety of materials …

Rotabroach Mini Cutters cut clean, burr-free holes in seconds. Features and Benefits: Precision ground teeth and flutes ensure a fast, smooth and accurate cut every time. Precision ground M2 high Speed Steel Over 3 times faster than standard twist drills making them highly economical. Low power consumption giving a long life to cordless drills. Typical Applications: The professional solution for cutting clean accurate holes in sheet metal, pipes and plastics.

HSS Cobalt Hole Saw 70mm 2.3/4in~ Premium grade 8 % Cobalt alloy steel construction for an extended working life~ Excellent wear resistance even at high temperatures~ For fast and clean cutting of metal, wood, aluminium, steel, cast iron, brass and plastics~ Variable pitch teeth for rapid cutting action, efficient swarf removal and reduced vibrationTechnical Specification:CE Certified: NoConflict Materials Content : NoREACH Content Status SVHC Free or Contains SVHC: SVHC freeRoSH Regs Within Scope: NoBatteries Included: NoBattery Powered: NoCharger Included: NoMains Powered: NoHealth and Safety Text: Users and bystanders are advised to wear safety gogglesDimensions: Length: 70mm x Height: 43mmWeight: …

Faithfull Bi-Metal Cobalt Holesaws with precision set teeth for aggressive material penetration and swarf clearance. This also provides a smooth, fast cutting action. Manufactured from bi-metal material with a 8% cobalt content for increased heat and wear resisitance for greater product life. Will cut thin and thick guage materials. Ideal for use on a wide variety of materials including stainless steel, steel, aluminium, sheet metal, mild metal, non-ferrous metals, cast iron, soft/hard wood and PVC. Suitable for use in most variable speed power drills. Specification Cutting Depth 38mm

The Footprint Tenon Saw is traditionally used for cutting tenon joints and other detailed sawing requirements. Made from high quality spring alloy steel, the blade can be re-sharpened time and time again. The teeth have been precision ground and set to ensure a clean cut. A heavy-duty brass back provides rigidity and support to the blade, giving a great cutting feel. The handle is made from an attractive two tone lacquered beechwood. It is of a traditional design providing superb comfort and strength adding to the feel and balance of the saw. Three brass screws securely fit the handle to the saw blade. Made in Sheffield, England.Footprint 256 Brass Back Tenon Saw has the following specification: …

The Bahco Plumber's Bi-Metal Holesaw Set contains Sandflex® Bi-Metal holesaws, specially designed for metal cutting: ferrous metals (steel, stainless steel, cast iron) and non-ferrous metals (aluminium, brass, copper). They can also be used in most materials such as wood and plastics. Bi-metal construction with 8% cobalt for increased wear resistance. This 14 Piece Kit contains: 12 x Holesaws: 16, 20(x2), 22, 25(x2), 29, 32, 35(x2), 38 and 44mm2 x ArborsAdditional Information:• Material: Bi-Metal

Lasts up to 50x longer than HCS hole saw in tough materialsCutting holes in brick, soft tiles and drywall is essential for plumbers and electricians on a building site or during renovation work. Few hole saws can withstand this kind of work in a mixture of tough construction materials, but the Expert Construction Material can. This one hole saw serves, and lasts, for many jobs.With just a few huge carbide teeth on its steel body, the Expert Construction Material delivers a real bite. Its large slots are optimised for fast chip removal, so it eats through anything from brick to wood and particle boards, fast. Bosch Carbide Technology is an optimum mix of the hardest metals, and ensures an extremely …

Bahco Sandflex® holesaws are made for high precision cutting of holes from 14 mm to 152 mm diameter in all sawable materials up to 38 mm thick. Suitable for use in portable electric or pneumatic tools, and in a wide variety of drilling, boring, milling and other machine tools. All saws have varipitch (4-6tpi) blades.Cutting edges are in high speed steel for extra hardness, with welded seams for accuracy of cut, and heat-treated bodies for maximum strength.Size: 67 mm. Arbors to suit (available separately). Code Holesaw Size ShankBAH3834930 930 14-30 mm 3/8 Inch (8.5mm).BAH38341130 1130 14-30 mm 7/16 Inch (11.1mm).BAH38349100 9100 32-100 mm 3/8 Inch (8.5mm).BAH383411152 11152 32-210 mm 1/2 …

Expert Tough Material For Long Life Cutting Holes In Multi Material Most Hole Saws For Wood And Metal Seem To Work Fine - Until You Hit A Hardened Nail Or Screw. Then They Scream And Smoke And Grind Until Their Teeth Are Torn Off, And You Still Only Have Half A Hole. With Its Carbide Teeth, The Expert Tough Material Barely Slows Down When It Hits Metal – It Cuts Neatly Through And Keeps On Cutting Holes, Time And Again. The Bosch Expert Tough Material Hole Saw Great All-Rounder For Every Tradesman – Because Half A Hole Is Not Even Worth Half A Hole.Features: - Long Life Cutting Holes In Multi Material- Exceptional Durability Is Built In With Bosch Carbide Technology.- Individually Ground Teet…

Features: - Bim Progressor Hole Saw Offers 2x Longer Lifetime Than Predecessor- Redesigned With Bi-Metal With 8% Cobalt Alloy For Increased Durability- Enhanced Progressive Tooth Strip Enables Faster Cuts- For Use With The Bosch Power Change Plus Keyless Arbor: Offering Accuracy And Robustness.- Suitable For Multipurpose UseSpecification:Materials:- Softwood- Drywall- Metal Pipes And Profiles- Non-Ferrous Metals- Diameter Mm: 89- Diameter Inches: 3 1/2- Working Length Mm: 44

Bosch 2608580447 HSS-Bimetal Hole Saw 5. 1/2in - 140mm Diameter The Bosch 2608580447 has a 5. 1/2in - 140mm diameter and a working depth of 38mm. It is designed to be used with Rotary Impact Drills or Rotary Hammer Drills. The bi-metal Hole Saw offers smooth cutting through various materials. The tooth configuration (Vario tooth strip) is ideal for gliding through material to provide smooth cuts. Made of bi-metal HSS (high-speed steel) containing 8% cobalt alloy, this hole saw has less risk of tooth breakage and higher heat resistance for long-lasting cutting. Use this hole saw when cutting through wood, metal and plastics The bi-metal Hole Saw fits all standard adapters on the market. Features: …