Power Saws

The CorePlus Diamond Holesaw provides professional, fast, clean cutting on a wide range of materials, from hard porcelain tile and stone to cement board and fibreglass. Leading-edge vacuum brazing technology ensures the diamonds stay bonded for extremely long life. Minimal water cooling is required when cutting hard tile, stone and glass. Use fully dry on other materials. Fluid, snag-free cutting, no secondary finishing required. The ultra-thin kerf generates a low amount of torque for faster cutting and extended battery life. Use with an arbor on a cordless drill or with an adaptor nut on an angle grinder.1 x CorePlus DMPHS64 Diamond Holesaw 64mm.Additional Information:• Size: 64mm• …

The ALM Manufacturing Replacement Chainsaw Chains to fit a wide range of chainsaw makes and models. The ALM Manufacturing Chainsaw Chain has a 3/8in low profile (L/P), 0.043in guide bar slot 0.375mm and low profile (L/P) 1.3mm guide bar slot. Made to fit Black & Decker, McCulloch, Ryobi ranges and suit saws with a 40cm bar and chain with 56 drive links including GK1640KF / Mac 442 / RCS-4040CA.

8´´ chain For TCS Li 18/20 telescopic pole saw.Chain pitch:3/8´´.Link width:0.043´´ / 1.1 mm.

Lasts up to 50x longer than HCS hole saw in tough materialsCutting holes in brick, soft tiles and drywall is essential for plumbers and electricians on a building site or during renovation work. Few hole saws can withstand this kind of work in a mixture of tough construction materials, but the Expert Construction Material can. This one hole saw serves, and lasts, for many jobs.With just a few huge carbide teeth on its steel body, the Expert Construction Material delivers a real bite. Its large slots are optimised for fast chip removal, so it eats through anything from brick to wood and particle boards, fast. Bosch Carbide Technology is an optimum mix of the hardest metals, and ensures an extremely …

The Bosch UNIVERSALCIRC 18V-53 is a cordless circular saw with a 160mm blade. Designed for the home and garden market it is part of the PowerForAll 18v Alliance and shares battery compatibility with a wide variety of cordless DIY and Garden power tools - from Bosch as well as other manufacturers. Features & Benefits • Cordless 160mm circular saw • Part of the PowerForAll 18v Alliance (requires one 18v PowerForAll battery) • Tackles most DIY woodwork thanks to 53 mm cutting capacity • Premium 160 mm Optiline saw blade with carbide-tipped teeth for accurate sawing • Compatible with the Bosch Home & Garden guide rail system • Rotating dust port: can be angled out of …

Bosch 2608594232 HSS-Bi-Metal Progressor Holesaw for Wood and Metal 79mm The Bosch 2608594232 HSS-Bi-Metal Holesaw has a diameter of 79mm and a working length of 44mm. BiM Progressor Hole Saw offers 2x longer lifetime than its predecessor. It has been redesigned with Bosch Bi-Metal with 8% cobalt alloy for increased durability. Additionally, it has an enhanced progressive tooth strip that enables faster cuts. Use this hole saw when drilling holes in wood, drywall, plastics, metal, non-ferrous metal and stainless steel. It is suitable for use with all corded and cordless drill drivers. Features:
- BiM Progressor Hole Saw offers 2x longer lifetime than predecessor
- Redesigned with Bi-Metal …

The bi-metal Hole Saw fits all standard adapters on the market. The bi-metal Hole Saw offers smooth cutting through various materials. The tooth configuration (Vario tooth strip) is ideal for gliding through material to provide smooth cuts. Made of bi-metal HSS (high-speed steel) containing 8% cobalt alloy, this hole saw has less risk of tooth breakage and higher heat resistance for long-lasting cutting. Use this hole saw when cutting through wood, metal and plastics • Smooth Cutting • Bi-metal Hole Saw offers smooth cutting through various materials • Tooth configuration (Vario tooth strip) is ideal for gliding through material to provide smooth cuts • Made of bi-metal …

The blade is for use in wood combination materials. The FS 200 AB Flush cutting saw blade has a SDS fitting for tool-free saw blade changes. It is compatible with all Bosch Power Tenon Saw GFS 350 E Professional saws. The FS 200 AB Flush cutting saw blade ensures precise, tear-free cuts in wood while maintaining a high surface quality. It has a cutting range of up to 40 mm deep. Additionally, this HCS saw blade has hardened teeth for clean results. Its fine teeth furthermore provide an accurate cut on both the left and right sides of the material. Flush cutting saw blade FS 200 ABU Suitable for wood combination materials. • Precise, Tear-free Cuts with High Surface Quality in Wooden Materials …

This Priory 400 Tank Cutter, for Hand Brace/Drill Stand, has a straight shank with 3 flats upon it to ensure a positive drive when used in 3 jaw chuck. The 400 is suitable for use in a handheld brace or drill stand, and the cutting blade is manufactured from heat-treated high-speed steel.The tank cutter has a high-speed steel pilot drill and is suitable for use on most tank materials. Specifications: Capacity: 25 - 125mm (1-5 in).Shank: Straight.Cutter: H.S.S.Additional Information:• Type: Cutter• Size: 25 to 125mm

Mini Circular Hand Saw / 500 Watt

Bahco Sandflex® holesaws are made for high precision cutting of holes from 14 mm to 152 mm diameter in all sawable materials up to 38 mm thick. Suitable for use in portable electric or pneumatic tools, and in a wide variety of drilling, boring, milling and other machine tools. All saws have varipitch (4-6tpi) blades.Cutting edges are in high speed steel for extra hardness, with welded seams for accuracy of cut, and heat-treated bodies for maximum strength.Size: 86 mm. Arbors to suit (available separately). Code Holesaw Size ShankBAH3834930 930 14-30 mm 3/8 Inch (8.5mm).BAH38341130 1130 14-30 mm 7/16 Inch (11.1mm).BAH38349100 9100 32-100 mm 3/8 Inch (8.5mm).BAH383411152 11152 32-210 mm 1/2 …

Makita 16 Piece Bi Metal Hole Saw Set, supplied in an aluminium case. The Bi-Metal Holesaw range have a varied-pitch tooth design and are recommended for cutting steel, aluminium, copper, brass, wood and plastic. Also available in Electricians and Plumbers kits with the most popular sizes. Application: trunking, conduit, pipe, kitchen, bathroom, hardwood, softwood, metal, mild steel, aluminium, PVC. Arbours available with hex (3 jaw chuck) and SDS-Plus shanks.Features & Benefits• Sizes carefully selected with the professional electrician in mind • Variable tooth pitch configuration • Fast cutting and long life • Ideal for cutting steel, aluminium, copper, brass, wood and …

Tungsten Carbide Tipped (TCT) Multi Purpose hole saws feature a unique tooth set for an ultra-aggressive, high performance cutting of non-metallics. Rapid, heat-free stock removal of wood, MDF, plastics, and ceramic tiles, with a 54mm (2.1/8") cutting depth. Power through wood, MDF, plastics, plasterboard and ceramic wall tiles up to five times faster than a bi-metal hole saw. Carbide Tipped teeth for outstanding cutting performance and product durability. Cutting depth of 54mm (2.1/8”). Smooth cut with minimal heat build up. Suitable for use in mains and battery powered tools. Special arbors featuring extended length pilot drills are availableTeeth per Inch (25mm): 1Teeth Type: Tungsten Carbide Ti…

The strong, high performance triple chip Tungsten Carbide Tipped hole saw provides long life when cutting difficult and abrasive materials, such as wood and PVC. It offers a cost effective solution for cutting through nail embedded wood, or virtually any wood and metal combination, reinforced concrete and fibreglass. Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster. Tungsten Carbide Tipped teeth for outstanding cutting performance and product durability. Will cut nail embedded wood or virtually and wood and metal combination, such as wooden doors with metal fascia panels. Cutting depth of 41mm (1.5/8""). Suitable for use …