Car Jacks

Expert Quality, polyester webbing, 90mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 3000kg for a load at one end (straight configuration) and 6000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Depth 8.2mm. Size ø104mm. Fits saddle ø98-105mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 8.2mm. • Size: ø104mm. • Fits saddle ø98-105mm. • Model No. JP15Technical Specification:Nett Weight: 0.074kgJack Pad Size: ø104mmStyle: Type BProfile Depth: 8.2mmTo Fit Saddle Size: ø98-105mmWeight: 0.074kgDimensions: Length: 15mm x Height: 190mmWeight: 0.074KgWarranty: Consumable

• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle.• The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp.• Low profile afforded by integral pivot/lifting point.Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. Low profile afforded by integral pivot/lifting point.• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. • The clamp may also be us…

• Strong tubular frame supplied with a range of pins to fit the most common headstock sizes.• Once in place, access to all mechanical components at the front of the bike is made easy.• Stand folds down for compact storage when not in use.Strong tubular frame supplied with a range of pins to fit the most common headstock sizes. Once in place, access to all mechanical components at the front of the bike is made easy. Stand folds down for compact storage when not in use. Supplied with width and angle adjustable rubber support pads to quickly and easily use as rear support stand.• Strong tubular frame supplied with a range of pins to fit the most common headstock sizes. • Once in place, access to…

Expert Quality, ideal for the workshop or factory use. The chain hoist has a triple spur geared shaft and pinion with load braking and double pawls. The compact gear housing allows use in areas of limited clearance. High quality welded chain with safety latches on the load hooks.

• Compact design but handles the larger bonnets, tailgates etc.• Ideal for doors, bonnets, bumpers, wings and spoilers.• Fully adjustable, rotates full 180°.• Adjustable and rotating bars make this stand suitable for almost all panel types.• Portable for easy manoeuvring of application from preparation to spray booth.Compact design but handles the larger bonnets, tailgates etc. Ideal for doors, bonnets, bumpers, wings and spoilers. Fully adjustable, rotates full 180°. Adjustable and rotating bars make this stand suitable for almost all panel types. Portable for easy manoeuvring of application from preparation to spray booth.• Compact design but handles the larger bonnets, tailgates e…

• Suitable for use with our lever hoists or chain blocks.• Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways.• Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer.Suitable for use with our lever hoists or chain blocks. Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer.• Suitable for use with our lever hoists or chain blocks. • Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. • Incorporates wheel guards to prevent contact with other trolleys mounted on same load…

Twin-piston, quick lift facility - just five pumps to reach maximum height
Lifting range 88-358mm
Integrated rubber saddle pad prevents damage to underside of vehicle
EVA foam handle to prevent panel damage
Knurled handle for extra grip
Twin safety overload valves
Rear swivelling castors
Manufactured to EN 1494 Specification
Draper 12 months parts and labour warranty

Solvent based Bitumen Paint, full bodied black brushable compound with added fibres for reinforcement. Specifically designed for overcoating leaking roofs but can also be used to bond felt. Dries to a tough black coating. Features and Benefits Specifically designed for waterproofing in roofing applications Easily applied by brush Once dried creates a tough weatherproof coating Fibre reinforced, can be used in felt bonding applications Available in 5ltr and 25ltr tins Typical Applications Roofing Waterproofing Building

BMW trolley jack rubber pad, designed to avert damage to the underside of a BMW when using a trolley jack, thus assisting in the prevention of rust on the underside of the vehicle's chassis. Made from durable and robust rubber. The rectangular locating rubber enables the pad to be secured within the unique BMW jacking port. For use with standard chassis trolley jacks with a saddle diameter of over 70mm.