Car Jacks

• Weight-for-weight, this strap is three to five times stronger than chain and has the advantage that overload can be detected early by the fraying of the strap.• Manufactured from 100% high strength polyester with reinforced lifting eyes.• Colour-coded according to European standards for identifying capacity.• Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (straight configuration).Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded accordin…

• Two rubber wheel chocks.• Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°.Two rubber wheel chocks. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Suitable for vehicles below 5 tonne.• Two rubber wheel chocks. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12 degrees. • Suitable for vehicles below 5tonne. • Model No. WC02Technical Specification:Applications: Suitable for vehicles below 5tonneDimensions (W x D x H): 115 x 270 x 175mmMaterial: RubberNett Weight: 6.13kgWeight Each: 3.3kgDimensions: Length: 215mm x Heig…

For repairs and maintenance. Suitable for most standard cars. Platform height 200mm; platform width 205mm approx. Extensions are available to lower the angle for low ground clearance vehicles Stock No 23306. Sold loose.

Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are softer than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 3 tonne x 2 metre

• Replacement hydraulic ram for SC10LR.V2 engine crane.Replacement hydraulic ram for SC10LR.V2 engine crane.• Replacement hydraulic ram for SC10LR.V2 engine crane. • Model No. SC10LR.V2-23Technical Specification:Nett Weight: 13kgRam Capacity: 7257kgRam Diameter: 33.93mmRam Travel: 495mmPump Type: Single SpeedRam Pin Hole Diameter: 16.5mmClevis Pin Hole Diameter: 16.7mmMounting Point Distance (Min): 620mmOverall Length (Min): 655mmBase Mount Type: Double ClevisWeight: 13.003KgWarranty: Consumable

Expert Quality, polyester webbing, 150mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 5000kg for a load at one end (straight configuration) and 10,000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Type B design. Fits inside the jack saddle.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 18mm. • Size: ø117mm. • Fits saddle ø112-117mm. • Model No. JP18Technical Specification:Nett Weight: 0.235kgJack Pad Size: ø117mmStyle: Type BProfile Depth: 18mmTo Fit Saddle Size: ø112-117mmWeight: 0.235kgDimensions: Length: 25mm x Height: 240mmWeight: 0.256KgWarranty: Consumable

• Designed to support and accurately position engines during maintenance operations such as replacing anti-vibration mountings and certain body panels.• Also used as an aid for the removal of gearboxes and transmissions.• Beams supported on rubber feet and fine adjustment control is obtained by using a screw/hook mechanism.• Supplied with a short length of chain.Supports and accurately positions engine during maintenance operations such as replacing anti-vibration mountings and certain body panels. Also used as an aid for the removal of gearboxes and transmissions. Beam supported on rubber feet and fine adjustment control is obtained by using a screw/hook mechanism. Supplied with a short length o…

• A fully adjustable saddle with forward, backward and side-to-side tilt.• Note: When using these adjustable supports the maximum capacity of the jack and support combination will be limited to the lowest specified capacity in the combination. e.g. 600GA and ADT3 - Maximum capacity is 500kg.Fully adjustable saddle with forward, backward and side-to-side tilt. Suitable for Model No's. 300TR, 300TRQ, 600TR, 600TRQ.• A fully adjustable saddle with forward, backward and side-to-side tilt. • Suitable for Model No's. 300TR, 300TRQ, 600TR, 600TRQ. • Note: When using these adjustable supports the maximum capacity of the jack and support combination will be limited to the lowest specified capacity in the com…