Effects Pedals

A custom circuit, this pedal is based on a classic OD famous for its grit and crunch—but we balanced out the midrange and bumped up the gain for a sweeter, more natural sound even when cranked. The simple three-knob interface of Output, Tone, and Drive controls is all you need to perfect your own recipes. In an MXR mini housing, the Raw Dawg Overdrive delivers tons of sonic flavor in a pedalboard-friendly package.This pedal can be powered by a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).
Battery Operation: No
Controls: Drive;Tone;Volume
Colour: Black
Number of Buttons: 1
Inputs: Jack 6.3 mm
Power Supply: 9V DC ( - );Adapter
Ou…

The JHS Pedals 3 Series Fuzz is a versatile fuzz box that cleans up well with your guitar's volume knob. The Fuzz is the perfect balance of vintage and modern with soaring sustain and clear articulation. The controls allow you to create a wide variety of sounds via the Bias knob, which gives the Fuzz a more gated sound as you turn it up. Unlike many fuzz pedals, the fuzz knob is usable across 100% of the sweep for many different flavors not typically found in a fuzz, like distortion, and even pushed amp-style overdrive tones. The Fat toggle engages a bass boost for an overall fatter, more powerful sound.
metal housing
6,3mm mono in / output jacks
power supply via optional 9V DC adapter 2,1x5,…

Pedal Design Foot Pedal

Liftoff with the EHX Spruce Goose Overdrive, an elevated take on a Bluesbreaker®-style OD with a smooth, rich breakup that retains clarity and dynamics. The Spruce Goose soars with a host of new features including a LIFT switch accessing 3 input gain settings, additional output, and expanded EQ to send your tone flying! From meaty boost to smooth singing leads, the Spruce Goose steers your tone into a variety of inspiring and musical directions. The engine of the Spruce Goose is an overdrive circuit renowned for its natural breakup and amp-like response. This circuit is then elevated to new heights by the LIFT switch which selects between 3 levels of input gain. LIFT effectively works as …

1 input, bass, keyboards and even vocals, status LED, 1 output, metal switch, very solid cover, speed control, power with 9v battery, optional power supply
Colour: Orange
Outputs: Jack 6,3 mm TS
Controls: Speed
Number of Buttons: 2
Inputs: Jack 6,3 mm TS
Made in: USA
Battery Type: 9V
Battery Operation: Yes
True Bypass: Yes
Type: Phaser
Power Supply: Adapter or Battery
UK/EU Power supply included: No

Overdrive / Pedal Design Foot Pedal / Effects Overdrive

Pedal Design Foot Pedal

Dual-Channel Guitar Preamp Faithfully Recreates the Sound of a 1965 JTM45 in a Pedal with Independent Channel Controls, Pre/Post Boost, Optional Cab Sim and Dedicated Outputs for DI and Headphones.At the heart of JIMS 45, AMPWORX modeling technology works its magic, carefully recreating the classic guitar tone that’s the sum of each and every component from the circuit of the original.The control layout is true to the original to not only give you authentic tone, but also a familiar look that makes you feel right at home. From this classic starting point, you can go classic, modern or just downright nuts. It’s all up to you how you want to tweak JIMS 45, but rest assured that no …

The JHS Pedals 3 Series Overdrive offers a wide range of overdrive sounds within straightforward design aesthetics. You can achieve anything from boost, transparent low gain, to huge amp-like medium overdrive sounds. The simple knob functions give you control over the Volume, Body (or EQ), and Drive. The Gain toggle gives you a choice between more saturated and compressed or more open and crunchy dynamics. This switch plays a big part in how the pedal responds to your playing and touch as a player.
metal housing
6.3 mm mono in / output jacks
power supply via optional 9V DC adapter 2.1 x 5.5 mm barrel plug, polarity (-) center
battery operation: not supported
current draw: 12 mA
dimensions (L …

The JHS Pedals 3 Series Phaser is a versatile and easy to use six-stage phaser pedal inspired by the classic phaser circuits of the 1970s. It has all the standard phase tones you would expect from a good pedal, but because of its unique Blend control and Feedback toggle, you can achieve an even wider range of modern and experimental tones. The JHS Pedals 3 Series will inspire your playing and help you explore new sounds at a totally approachable price point.
metal housing
6.3 mm mono in / output jacks
power supply via optional 9V DC adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center
battery operation: not supported
current draw: 71 mA
dimensions (L x W x H): 112 x 60 x 31 mm
weight: ca. …

Bass pedal effect - pre-amp and overdrive. The three-band EQ includes Treble (boost/cut above 1 kHz) and Bass (boost/cut below 200 Hz) controls, plus a Mid switch which provides a 9 dB boost or cut at 500 Hz. Three signal path options determine where the EQ is applied. In Distortion Mode the EQ comes after the distorted signal and has a powerful effect on its timbre while the clean signal is not affected. In Input Mode the EQ comes first in the signal path affecting both the clean and distorted signals. Boosting frequencies in this mode can drive the distortion to a more saturated state. In Dry Mode the EQ affects the clean signal, but not the distorted signal.
User-friendly controls include …

controls for sound output and distortion, True hardwire bypass, vintage tube amp distortion, operation with power supply or battery (not included), selected components, solid metal housing
Made in: USA
Power Supply: Adapter or Battery
Battery Type: 9V
Battery Operation: Yes
UK/EU Power supply included: No
Type: Distortion

The JHS Pedals 3 Series Screamer is the beloved JHS TS 'Strong Mod', but in a brand-new stand-alone pedal. This pedal represents years of JHS Pedals playing around with the legendary TS-circuit and wanting to offer those changes in an affordable package. The Screamer offers more clean headroom, a better usability as a boost, more versatile drive and tone controls as well as a more pleasing frequency response than standard TS-style pedals. After years of hard work, this might be the most well-balanced TS-style pedal on earth!
Package Contents: Manual
USB: No
Battery Operation: No
UK/EU Power supply included: No
Depth (mm): 112.0
Weight (g): 210.0
Outputs: Jack 6,3 mm
Controls: Tone;Switch;Volume;Drive<…

Analog Distortion Pedal for E-Guitar, Switch for Crunch Modus, 2 Status-LED, Works with 9V-Battery or Dunlop ECB-003 AC Adapter (optional not included), Control for Output, Tone and Distortion, Made in USA.,
Controls: Output;Tone;Distortion
True Bypass: Yes
Type: Distortion
Outputs: Mono
Made in: USA
UK/EU Power supply included: No
Inputs: Mono
Battery Operation: Yes
Power Supply: Adapter or Battery
Battery Type: 9V

The EHX Pico Platform Compressor / Limiter is a powerful and versatile studio-style compressor enclosed in a pico-sized package. Borrowing from the original, the Pico Platform condenses the comp section of the full-sized Stereo Platform for those looking to fit smooth studio compression onto any pedalboard. Packed with 2 modes and Hard/Sort Knee compression options, it is a perfect fit for sculpting your dynamics with professional precision. Use the Pico Platform compressor / limiter on any instrument for precise and powerful control of your signal’s volume and of course, extended sustain on leads. Add subtle dynamic control to level out peaks and valleys in your signal or give your sound …

Looper pedal effect suitable for guitar and bass guitar. The device allows 360-second recording in 11 storable, independent loops. It offers very simple control of record, overdub, undo-redo and erase functions using a footswitch. It also has a 24-bit digital converter, thanks to which it offers excellent sound quality and dynamics. The effect has a built-in one 1/4 "In or Out connector. An adapter is also included in the package.
MIDI Interface: No
Type: Looper
Outputs: Mono
USB: No
Power Supply: Adapter
True Bypass: None
Built-in Effects: No
Made in: USA
UK/EU Power supply included: Yes
Inputs: Mono
Controls: Loop;Level
Battery Operation: No
SD Slot: No…

Pedal effect from TC Electronic. Tiny legendary delay pedal returns with innovative pressure-sensitive footswitch and a fresh batch of TonePrints. Secondary footswitch functions: MASH and Tap Tempo give you powerful real-time parameter control. Next-generation delay algorithms give you ultra-realistic analog and tape delay tones with warble and flutter effects. All new mesmerizing Crystal delay utilizes polyphonic octaver engine from SUB 'N' UP OCTAVER for otherworldly tones. Craft your own delays and customize MASH functionality with free TonePrint Editor (PC, Mac, iPhone, Android and iPad). TonePrint-enabled to let you beam the new FLASHBACK 2 presets into your pedal with the free TonePrint …

Booster

The JHS Pedals 3 Series Distortion is a massively versatile distortion pedal with the ability to achieve medium gain crunch, heavy overdrive, distortion, and even fuzz tones. The controls on the Distortion are Volume, Filter (or Tone), and Distort knobs that give you a wide range of usable sounds in any position. The Gain toggle gives you a choice between more saturated and compressed or a more open and crunchy distortion. This switch plays a big part in how the pedal responds to your playing and touch dynamics.
metal housing
6.3 mm mono in / output jacks
power supply via optional 9V DC adapter 2.1 x 5.5 mm barrel plug, polarity (-) center
battery operation: not supported
current draw: 9 mA
dimensions &hellip;

Pedal effect from TC Electronic. Tiny iconic reverb pedal returns better than ever with an innovative pressure-sensitive footswitch and new TonePrints. MASH footswitch gives you powerful effect-specific real-time parameter control. Next-generation reverb algorithms including the new spine tingling Shimmer reverb. Dedicated knobs for Decay, Tone and Mix let you fine tune your reverb easily. Beam all HALL OF FAME 2 reverbs into your pedal with the free TonePrint App. Craft your own reverbs and customize MASH functionality with free TonePrint Editor (PC, Mac, iPhone, Android and iPad). Simple, easy-to-use controls let you focus on playing. Works flawlessly with guitar and FX loop signals. Extra-small …

Octave / fuzz guitar floor effects offering classic, vintage fuzz sound from the late 60's along with added top octave and modern enhancements. It is controlled by potentiometers for Volume, Octave and Boost.
True Bypass: Yes
Made in: USA
Power Supply: Adapter or Battery
Inputs: Mono
UK/EU Power supply included: No
Type: Fuzz;Boost;Octaver
Outputs: Mono
Battery Operation: Yes
Battery Type: 9V
Controls: Boost;Octave;Volume

The JHS Pedals 3 Series Reverb is an extremely versatile unit that allows you to create the perfect amount of space for your guitar. You can achieve any reverberation effect, all the way from small room sounds to nearly endless washes of ambiance. The EQ lets you perfectly adjust for a bright or dark texture to the reverb's overall tone. The Pre-Delay toggle allows you to select a short delay before the reverb begins. This lets you explore effects ranging between slap-like singing in the shower sounds and spacey spring-like sounds.
metal housing
6,3mm mono in / output jacks
power supply via optional 9V DC adapter 2,1x5,5mm barrel plug, polarity (-) center
battery operation not supported
current &hellip;

The Mooer Preamp Model X2 comes loaded with a host of features that make it easy to customize your digital preamp and cabinet setup. Featuring 3 global cab sim files, support for third-party impulse response files, and 14 preset slots, each with two different channel settings to customize, the Preamp Model X2 offers plenty of space to prepare for long gigs or the freedom to explore and save different tonal combinations. Where the Preamp Model X2 excels compared to previous Mooer preamp pedals is in the user interface and digital editor software. The expanded footswitch layout of the X2 gives users two settings to choose from: one for preset scrolling and one for A/B channel switching. The editor …

Analog Chorus Pedal for E-Guitar, Reglern for Level, EQ with control for Bass and Treble, Status-LED, Rate and Depth, works with 9V-Battery or 9V DC optional power supply
Outputs: Mono
Type: Chorus
Controls: High;Depth;Level;Rate;Low
True Bypass: Yes
Battery Type: 9V
Battery Operation: Yes
Power Supply: Adapter or Battery
UK/EU Power supply included: No
Made in: USA
Inputs: Mono