Effects Pedals

The Korg PS3 Single Momentary Footswitch Plastic Case adds sustain function to your Korg keyboards and synthesizers. Simple and easy to use the PS3 boasts an integrated 1/4-inch jack cable to connect your device instantly! Constructed with a tough rugged ABS plastic the PS3 Single Momentary Footswitch will ensure a long-lasting life even under heavy usage making it the ideal footswitch for learners or touring professionals. A non-slip rubber base helps to maintain the position of your PS3 Single Momentary Footswitch when performing ensuring you can play uninterrupted.

The Palmer Hook and Loop Fastener is a 1 metre strip of self-adhesive tape which is perfect for mounting devices on pedal boards.

The DAddario XPND Pedal Riser is a blessing for the pedal enthusiast. Sometimes your favourite stompbox is at an awkward position or angle on stage making it hard to engage when its needed most. But with DAddarios handy pedal riser youll be troubled no more. Built from ultra-durable aluminium its simple to install and will raise your pedal to a prime easily accessible position.Even better you can fit a number of these across your XPND pedalboard if youre a real effects nut and with built-in cable routing itll help keep your stage manageable. This smaller size is ideal for a single pedal.

Instrument Equipment Bag

Wall Adapter Power Supply. 9V DC power supply, 2000 mA, Polarity: (-) center, (+) ring, Euro plug
UK/EU Power supply included: No
Plug Type: Barrel
Current: 2000 mA
Current (mA): 2000.0
Polarity: Center Minus
Made in: China
ChargerType: Power Supply
Voltage: 9V
Power Supply: 240V

Custom moulded in the UK to fit the contours of the Boss Stomp Box. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Boss Stomp Box.
Made in: United Kingdom
Compatible with: Boss Stomp Box
Type: Dust Cover

The Decksaver Eventide 3 SWITCH Cover is a high-quality cover designed to accommodate most three-button switch guitar pedals by Eventide protecting your equipment while on the move. The custom moulded protective cover is constructed from a highly-durable polycarbonate shell for optimal strength. The cover helps to protect your pedals from dust liquid accidental impact damage and more while on the move. The precision trimmed design of the Decksaver cover allows you to accommodate cables and more so your equipment is always ready to go. With its smoked clear finish the cover allows you to see your controller at all times. Please Note: Pictures are for reference only and the cover does not include …

The Decksaver BOSS 200 Cover is a high-quality cover designed to accommodate your electric guitar pedals protecting your equipment while on the move. The custom moulded protective cover is constructed from a highly-durable polycarbonate shell for optimal strength. The cover helps to protect your pedals from dust liquid accidental impact damage and more while on the move. The precision trimmed design of the Decksaver cover allows you to accommodate cables and more so your equipment is always ready to go. With its smoked clear finish the cover allows you to see your controller at all times. Please Note: Pictures are for reference only and the cover does not include the pedal.

Universal expression pedal. Compatible with most expression pedal sockets. Rubber feet for solid floor-grip. Rubber contact surface. Sensitivity pot. Polarity switch. 183 cm cable with 6,3 mm jack plug. Weight: 318 g. Colour: Black
Made in: China

Custom moulded in the UK to fit the contours of the Eventide H9 & H9 Max. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Eventide H9 & H9 Max.
Compatible with: Eventide H9 / H9 Max
Made in: United Kingdom
Type: Dust Cover

The Nektar NP-1 and NP-2 universal foot switch pedals are solid, rugged and ideal for both studio and stage. Rubber gripping keep them in place during performances and polarity switching ensures they work with any keyboard or electronic product, requiring a foot switch. Universal piano style keyboard sustain foot switch pedal. Solid metal pedal and base with rubberized cover. Rubber foot plate for solid floor grip. Polarity switch - works with all keyboards. 6ft cable with 1/4'' TS jack plug. Weight: 1.6 lb.
Cable Length: 1,8 m
Compatible with: Universal
Type: Sustain Pedal
Polarity Switch: Yes
Colour: Black
Type-A Connector: Jack MONO 6,3 mm Male
Original Colour by Producer: Black;Black
Made …

The Pedaltrain Triple Pedal Booster allows you to customise your board to your needs by elevating up to three pedals by one inch to a more comfortable reachable and easy to use height.

Instrument Equipment Bag / Black / 0.18 kg / Foam Padding 8 mm

Custom moulded in the UK to fit the contours of the Boss 500 Series. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Boss 500 Series.
Type: Dust Cover
Made in: United Kingdom
Compatible with: Boss 500 Series

The TC PowerPlug 9 gives you 9 volts of TC approved power for use with your TC Electronic pedals including TonePrint PolyTune Ditto Loopers and analog drive pedals.

The Behringer PSU-HSB-ALL Power Adapter is designed for use with a wide variety of 9-volt devices including over 20 effects pedals at a time and keyboards. The adapter is supplied with 4 x assorted jumper cables and 2 x daisy-chain cables with 5 x connectors. With a transformerless design the PSU-HSB-ALL eliminates the 50/60-cycle hum and noise. The Behringer PSU-HSB-ALL features a 2-pin Euro plug and is designed for use with 220V - 240V sockets.

Kicking the ULTRA VIBRATO UV300 into action is like putting an invisible, automatic whammy bar on your guitar. From the gentle, pulsing rhythms of the ocean surf, to the wild, whirling effects of a rotating speaker system, the UV300 will bring a dose of days-gone- by to your sound. Select from Unlatch, Bypass or Latch modes and twist the dedicated Rise, Rate and Depth dials to create your ideal vibrato. In Latch mode, the effect is constantly on once you step on it. Unlatch mode only applies the effect while you press down on the pedal, so you can add vibrato to a single note if you like. Your guitar will be playing mind-games with everyone in earshot as familiar, but hardly ordinary, tones …

The Behringer UT300 Ultra Tremolo Pedal offers up the vintage tremolo effects present in 50s and 60s amplifiers. Compact lightweight and easily transportable this handy stompbox fits excellently into your setup providing equally impressive tones. The tone can be sculpted with impeccable ease thanks to three dedicated controls including a Rate Wave and Depth allowing the creation of a multitude of unique sounds that infuse your performance with impeccable depth. Powered through a 9-volt battery you can easily check the status of your pedal with an on/off LED.

Lets get it out the way this pedal sounds best cranked. Known as diming the controls the Behringer HM300 Heavy Metal Pedals circuit gained its legendary reputation by setting every control to 10 and letting the mayhem unfold. This gives the characteristic chainsaw-like buzzing distorted tone by pushing the circuit to extreme levels of clipping. This was the sound of Swedish death metal which is also the reason the original circuit has left such a significant legacy. If you need a distortion pedal to propel your tone to crushing new highs and deliver some of the most grinding textures available the HM300 supplies it in abundance.

Professional piano-style universal sustain pedal or footswitch controller that is the perfect product for keyboard players who want the most realistic pedal action. This classic-style, high-quality switchable damper pedal is used in the same manner as the sustain pedal on an acoustic piano and works with any M-Audio keyboard. Designed to work and feel just like an acoustic piano's sustain pedal, it has a specially designed rubber bottom that grips the floor and stays put while you play. A 1.8m long cable with 1/4'' connector is included.
Type: Sustain Pedal
Type-A Connector: Jack MONO 6,3 mm Male
Original Colour by Producer: Black;Black
Colour: Black
Cable Length: 1,8 m
Polarity Switch: Yes
Compatible …

The Behringer HD300 Heavy Metal Distortion Effects Pedal gives you the tools to create high levels of crushing distortion and sustain with ease. Theres serious sustain on offer giving you the ability to get really sludgy crushing sounds with ease. The expanded 4-knob layout gives you total control over your tone with a dedicated Bottom knob perfect for optimising the pedal for lower tunings or 7+ string guitars. If you need to go heavier go with the HD300.

Stereo chorus guitar effect pedal that features dedicated Level, Tone, Rate and Depth controls for an incredible sound shaping. It also provides a status LED indicator for effect on/off and battery check, and a first-class electronic on/off switch that maintains incredible signal integrity in bypass mode. Pedal can be powered by either a 9 V battery or DC power supply (not included). Dimensions: 54 x 70 x 122 mm. Weight: ca 330 g.
Type: Chorus
Power Supply: Adapter
Battery Operation: Yes
Made in: China
UK/EU Power supply included: No

The Strymon 9V UK Power Supply can be used to power your Strymon effects pedal and any other 9V centre negative pedals. Offering up to 667mA the Power supply will make sure your pedal is running at maximum allowing you to use your pedal to the best of its ability. Its low noise operation and automatic worldwide voltage conversation Strymons official power supply is perfect as a replacement to keep your pedal going no matter where.

The Behringer TO800 Vintage Tube Overdrive pedal is a faithful recreation of that classic green overdrive. The inclusion of the defining 4558 op-amp chip is a nice nod to the original design along with the familiar 3-knob layout which both looks sleek and is remarkably easy to use. With these controls you can adjust the level of the effect adjust the tone and set how much gain youd prefer. This allows you to sculpt your tone however you see fit from a light boost to thick resonant overdrive. Whatever crunchy tone youre after the TO800 will deliver.