Power Saws

Tungsten Carbide Tipped (TCT) Multi Purpose hole saws feature a unique tooth set for an ultra-aggressive, high performance cutting of non-metallics. Rapid, heat-free stock removal of wood, MDF, plastics, and ceramic tiles, with a 54mm (2.1/8") cutting depth. Power through wood, MDF, plastics, plasterboard and ceramic wall tiles up to five times faster than a bi-metal hole saw. Carbide Tipped teeth for outstanding cutting performance and product durability. Cutting depth of 54mm (2.1/8”). Smooth cut with minimal heat build up. Suitable for use in mains and battery powered tools. Special arbors featuring extended length pilot drills are availableTeeth per Inch (25mm): 1Teeth Type: Tungsten Carbide Ti…

High performance hole saws for drilling small diameter holes in non-metallics. The ideal solution for the toughest cutting situations. Featuring a diamond coated cutting edge permanently bonded to a tough steel body, the Starrett Diamond Grit hole saw provides the necessary clearance for cutting at high speeds. Rapid cutting solution for non-metallics. Small diameter hole saws are perfect for kitchen and bathroom installations. Smooth surface finish, ideal when cutting glass and ceramics. Supported by a comprehensive range of arbors with carbide tipped pilot drills. The ultimate hole saw for hard-to-cut materialsTeeth Type: Synthetic diamond gritCountry of Origin: CN Specifications: Diameter …

Ideal for cutting stainless and high alloy steels, non-ferrous light metals and reinforced fabrics, all at a much faster speeds than bi-metal hole saws. Perfect for production cutting and particularly suitable for use in drills with limited speed control.• Split-point drill for faster penetration and self-centring • Ideal for production cutting, and particularly suitable for use in drills with limited speed control • Fitted with ejector spring for easy core removal • Step drill for faster cuts in thinner materials • Tungsten carbide tipped teeth provide superb product life and cutting performance • Safety stop at the base of the hole saw prevents drilling beyond the maximum cutting depth of 13m…

The RemGrit® Holesaw is a carbide grit edged holesaw designed to cut extremely hard or abrasive materials including ceramic tiles, laminates, MDF, marble,slate, glass fibre and virtually any material that does not form a chip. It cuts cast iron, ceramic tiles, laminates, composition board, marble, slate, glass fibre, asbestos. Totally interchangeable with all other American Pattern Holesaws. Maximum Cutting Depth: 29mm.Disston G054 Remgrit Holesaw 86mmAdditional Information:• Size: 86mm• Material: Carbide Grit

Lenox Diamond hole saws are designed to cut more holes in less time. They are durable and long lasting, with oversized slots for quick removal of waste material. Specifications • Diameter: 25mm • Compatible Arbors: 2L, 3L, 6LFeatures & Benefits• Brazed edge lasts longer in tiles and stone • Robust design for greater durability in tough applications • Low torque, little pressure required • Oversized slots for easy plug removalContents• Hole Saw only • No Arbor or Pilot Drill (see specifications for compatible arbors)

• HSS Air saw blades suitable for Sealey and other leading makes of air saw.• Contents: 14tpi Saw Blades (x3), 24tpi Saw Blades (x9), 32tpi Saw Blades (x3).• Supplied in a pack of 15.HSS Air saw blades suitable for Sealey and other leading makes of air saw. Contents: 14tpi Saw Blades (x3), 24tpi Saw Blades (x9), 32tpi Saw Blades (x3). Supplied in a pack of 15.Technical Specification:Application(s): S01045, SA1006, SA34, SA342, SA347, GSA345Blade Pitch: 14tpi (x3), 24tpi (x9), 32tpi (x3)Nett Weight: 0.06kgPack Qty: 15Dimensions: Length: 10mm x Height: 190mmWeight: 0.065KgWarranty: Consumable

Replacement bar and chain for the DeWalt DCM575 chainsaw. Specifications • Length: 400mm

The ALM Manufacturing CH352 Universal Bar & Chain 52 link to suit various machines. Easy to fit/use with extra sharp teeth for prolonged chain wear. Suitable for the following: Sovereign models: YT4334-01 (314229/4535193) Compares to: 140SDEA041. Qualcast models 36v 4.0Ah Chainsaw QCLi YT4388-03 (Homebase SKU 485584). Ryobi models with a 35cm (14 inch) bar PCN3335,RCS-3535,RCS-3535A. Performance Power models with a 35cm (14") bar PP350C,PWR33ccCSA, PWR1750CSA, PWR1750CSB, PWR1750CSC, PWR1750CSD, PWR1800CSB, PWR1800CSC, PWR1800CSD, TRY1800CSA 1800W. McCulloch models with a 35cm (14 inch bar) Mac 335, Mac 338, Mac 435, Mac 436, Mac 438, Mac 738, Mac 838, Homelite models with a 35cm (14") bar CSP3314,…

Lasts up to 50x longer than a BiMetal hole saw in tough materialsCutting holes in sheets of steel is not like other hole saw applications. In industrial settings, or when working on vehicles, you have to be extremely precise – but at the same time the material is hard and destroys traditional BiMetal hole saws. The Expert Sheet Metal solves all these issues in one compact piece of high quality engineering.The Expert Sheet Metal is made from a single cylinder of turned metal for ultimate stability, robustness and accuracy. Extreme durability and the ability to cut the hardest grades of steel comes from its carbide teeth, which are individually sharpened and brazed onto the body.This hole saw pa…

Lasts up to 50x longer than a BiMetal hole saw in tough materialsMost hole saws for wood and metal seem to work fine - until you hit a hardened nail or screw. Then they scream and smoke and grind until their teeth are torn off, and you still only have half a hole. With its carbide teeth, the Expert Tough Material barely slows down when it hits metal – it cuts neatly through and keeps on cutting holes, time and again.Made with Bosch Carbide Technology, each tooth is an optimum grade of the hardest metal, laser welded and ground six times for the perfect cutting shape. This makes the Bosch Expert Tough Material Hole Saw ideal for tough jobs and all-round trades work: As well as wood and metal, i…

It is suitable for use with all corded and cordless drill drivers. The BiM Progressor Hole Saw offers 2x longer lifetime than its predecessor. It has been redesigned with Bosch Bi-Metal with 8% cobalt alloy for increased durability. Additionally, it has an enhanced progressive tooth strip that enables faster cuts. Use this hole saw when drilling holes in wood, drywall, plastics, metal, non-ferrous metal and stainless steel. BIM Progressor Hole Saw offers 2x longer lifetime than predecessor • 2x Longer Lifetime Than Predecessor • BiM Progressor Hole Saw offers 2x longer lifetime than predecessor • Redesigned with Bi-Metal with 8% cobalt alloy for increased durability • Enhanced …

It is suitable for use with angle grinders. The Diamond Cutter Dry Speed delivers long life when dry drilling hard ceramics. Its high-class diamonds provide very high drilling speeds, and its vacuum-brazing technology ensures a long lifetime. This product is intended for tiles ranging from soft wall tiles to very hard floor tiles, such as stoneware. • Long Life for Hard Ceramics • Diamond Cutter Dry Speed delivers long life when dry drilling hard ceramics • High-class diamonds provide very high drilling speeds • Vacuum-brazing technology ensures long lifetime Specifications: Diameter (D) mm: 22 Diameter (D) Inch: 7/8 Working length (L1) mm: 35 Materials: Stone Materials …

Big power in a small package: Black & Decker's GKC1820L20 chainsaw combines a short 8" bar with a high performance motor and lithium ion battery power. Where larger chainsaws can prove difficult to use above shoulder height, the GKC1820L20's lightweight construction makes it ideal for otherwise trying pruning tasks, as well as any other light duty woodcutting tasks you have in mind. The GKC1820L20 is energy efficient too - a 2ah lithium Ion battery will power the chainsaw for an average of 150 cuts per charge. Use is kept comfortable by a rubber overmoulded, textured rear grip, a large wrap-around side handle & balanced weight distribution throughout the tool. Other benefits include the GKC1820L20's …

Bosch 2608584670 HSS-Bimetal Progressor Holesaw Kit 9 Piece The Bosch 9 Piece HSS-Bimetal Progressor Holesaw Kit contains 6 holesaws in sizes from 20mm to 64mm or 25/32 inch to 2.1/2 inch. Suited to cutting both wood and metal they are made with 8% Cobalt Alloy. Features:
- Progressor holesaw kit for wood and metal
- For the toughest demands - quickly and steadily through a wide variety of materials
- Progressive tooth strip for high performance and fast chip clearance
- HSS bi-metal with 8% cobalt alloy for extreme resilience and a long lifetime
- Power change adapter for a fast and safe attachment and release of the pilot drill bit and holesaw, with just one click
- The cutting …

Bahco Sandflex® holesaws are made for high precision cutting of holes from 14 mm to 152 mm diameter in all sawable materials up to 38 mm thick. Suitable for use in portable electric or pneumatic tools, and in a wide variety of drilling, boring, milling and other machine tools. All saws have varipitch (4-6tpi) blades.Cutting edges are in high speed steel for extra hardness, with welded seams for accuracy of cut, and heat-treated bodies for maximum strength.Size: 95 mm. Arbors to suit (available separately). Code Holesaw Size ShankBAH3834930 930 14-30 mm 3/8 Inch (8.5mm).BAH38341130 1130 14-30 mm 7/16 Inch (11.1mm).BAH38349100 9100 32-100 mm 3/8 Inch (8.5mm).BAH383411152 11152 32-210 mm 1/2 …

HSS Bi-Metal variable pitch tooth 4-btpi with 5% cobalt content for high durability and extended working life. Suitable for wood, gypsum board, plastics, non ferrous metals, aluminium, steel and stainless steel. Large range from 14-152mm with hex and SDS adaptors and extra long pilot drill. Features & Benefits • High durability and extended working life • Large range from 14-152mm • Application: Holes, conduit, piping, sheet metal, channelling, trunking, lighting Specifications • Diameter: 60 mm • Arbor Part Number: P-35162 / P-35184 • Pack Quantity: 1