Power Saws

The strong, high performance triple chip Tungsten Carbide Tipped hole saw provides long life when cutting difficult and abrasive materials, such as wood and PVC. It offers a cost effective solution for cutting through nail embedded wood, or virtually any wood and metal combination, reinforced concrete and fibreglass. Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster. Tungsten Carbide Tipped teeth for outstanding cutting performance and product durability. Will cut nail embedded wood or virtually and wood and metal combination, such as wooden doors with metal fascia panels. Cutting depth of 41mm (1.5/8""). Suitable for use …

High performance hole saws for drilling small diameter holes in non-metallics. The ideal solution for the toughest cutting situations. Featuring a diamond coated cutting edge permanently bonded to a tough steel body, the Starrett Diamond Grit hole saw provides the necessary clearance for cutting at high speeds. Rapid cutting solution for non-metallics. Small diameter hole saws are perfect for kitchen and bathroom installations. Smooth surface finish, ideal when cutting glass and ceramics. Supported by a comprehensive range of arbors with carbide tipped pilot drills. The ultimate hole saw for hard-to-cut materialsTeeth Type: Synthetic diamond gritCountry of Origin: CN Specifications: Diameter …

Fast Cut Bi-Metal Hole Saws contain an extra cobalt HSS tooth material for enhanced heat and wear resistance, along with a new 5.5 TPI positive rake tooth design, to ensure a smoother and faster cut when compared against our previous Constant Pitch Hole Saw. Specifically designed to cut stainless steel, metals and mild steel sheet, Fast Cut Saws will also cut through wood, plastic, plaster and other materials. Recommended cutting depth - up to 13mm (1/2”) in softer materials.Teeth per Inch (25mm): 5,5Teeth Type: Extra Cobalt HSSCountry of Origin: BR Specifications: Diameter metric: 127mm Diameter imperial: 5" Cutting Depth metric: 41mm Cutting Depth imperial: 1,5/8" Thread Size: 5/8 - 18"Features & …

The IRWIN bi-metal holesaws have been designed for the professional and made to provide long-lasting performance for use in general construction, electrical installation, plumbing, heating and ventilation, and remodelling applications. The sharp, variable tooth (4-6 pitch) design provides a faster cutting action and enhanced performance in a variety of materials and cutting applications. The bi-metal construction and the electron beam welded teeth give the user a stronger, longer-lasting blade. The IRWIN holesaw range is available from sizes 14 mm (9/16in) to 152 mm (6in), with a line up of high-quality arbors and a pilot drill to cover all application requirements. Cuts a variety of materials …

• HSS Air saw blades suitable for Sealey and other leading makes of air saw.• Supplied in a pack of 15.HSS Air saw blades suitable for Sealey and other leading makes of air saw. Supplied in a pack of 15.Technical Specification:Application(s): SA345Blade Pitch: 32tpiNett Weight: 0.66kgPack Qty: 15Dimensions: Length: 10mm x Height: 190mmWeight: 0.045KgWarranty: Consumable

Bi-metal hole saw featuring hardened tooth design with additional cobalt. Efficient debris removal thanks to the double tooth design with shallow and deep shoulder. Features & Benefits • For cutting steel, stainless steel, aluminium, brass, copper, zinc, tin, wood, plaster and plastics • Hardened tooth design with 8% additional cobalt provides 2x life (vs standard bi-metal) • Angled plug removal slots to make plug ejection easier • Deep cut style hole saws will cut 2-by material in 1 pass Specifications • Diameter: 19mm • Pack Quantity: 1

Fast Cut Bi-Metal Hole Saws contain an extra cobalt HSS tooth material for enhanced heat and wear resistance, along with a new 5.5 TPI positive rake tooth design, to ensure a smoother and faster cut when compared against our previous Constant Pitch Hole Saw. Specifically designed to cut stainless steel, metals and mild steel sheet, Fast Cut Saws will also cut through wood, plastic, plaster and other materials. Recommended cutting depth - up to 13mm (1/2”) in softer materials.Teeth per Inch (25mm): 5,5Teeth Type: Extra Cobalt HSSCountry of Origin: BR Specifications: Diameter metric: 152mm Diameter imperial: 6" Cutting Depth metric: 41mm Cutting Depth imperial: 1,5/8" Thread Size: 5/8 - 18"Features & …

The ALM Manufacturing Replacement Chainsaw Chains to fit a wide range of chainsaw makes and models. The ALMCH050 Chainsaw Chain has a 3/8 inch Low profile (L/P), 0.043in guide bar slot 0.375 mm and Low profile (L/P) 1.1 mm guide bar slot. This chain is made to fit the B& Q / McCulloch / Performance Power / Stihl ranges and suit saws with a 35cm bar and chain with 50 drive links including PWR1700CSB, PP35CS / Electramac 335, Electramac 414, Electramac 441 / MS180, 020, 021, 023

Bahco 3802 HSS Power Hacksaw Blades have been designed to cut almost any material. Suitable for use on modern machines with skilled operators and a high degree of control.1 x Bahco 3802 HSS Power Hacksaw Blade 350mm (14in) x 1.1/4in x 10 TPIAdditional Information:• Type: 350mm• TPI: 10• Pack Qty.: 32mm

Lasts up to 50x longer than HCS hole saw in tough materialsCutting holes in brick, soft tiles and drywall is essential for plumbers and electricians on a building site or during renovation work. Few hole saws can withstand this kind of work in a mixture of tough construction materials, but the Expert Construction Material can. This one hole saw serves, and lasts, for many jobs.With just a few huge carbide teeth on its steel body, the Expert Construction Material delivers a real bite. Its large slots are optimised for fast chip removal, so it eats through anything from brick to wood and particle boards, fast. Bosch Carbide Technology is an optimum mix of the hardest metals, and ensures an extremely …

Lasts up to 50x longer than a BiMetal hole saw in tough materialsMost hole saws for wood and metal seem to work fine - until you hit a hardened nail or screw. Then they scream and smoke and grind until their teeth are torn off, and you still only have half a hole. With its carbide teeth, the Expert Tough Material barely slows down when it hits metal – it cuts neatly through and keeps on cutting holes, time and again.Made with Bosch Carbide Technology, each tooth is an optimum grade of the hardest metal, laser welded and ground six times for the perfect cutting shape. This makes the Bosch Expert Tough Material Hole Saw ideal for tough jobs and all-round trades work: As well as wood and metal, i…

It is suitable for use with all corded and cordless drill drivers. The BiM Progressor Hole Saw offers 2x longer lifetime than its predecessor. It has been redesigned with Bosch Bi-Metal with 8% cobalt alloy for increased durability. Additionally, it has an enhanced progressive tooth strip that enables faster cuts. Use this hole saw when drilling holes in wood, drywall, plastics, metal, non-ferrous metal and stainless steel. BIM Progressor Hole Saw offers 2x longer lifetime than predecessor • 2x Longer Lifetime Than Predecessor • BiM Progressor Hole Saw offers 2x longer lifetime than predecessor • Redesigned with Bi-Metal with 8% cobalt alloy for increased durability • Enhanced …

The Diamond for Hard Ceramics Hole Saw cuts through the hardest tiles. Its diamond coating gives this hole saw durability on very strong tiles made from all types of ceramic materials. In addition, the thin cutting edge allows for rapid, clean cuts. Use this hole saw when cutting through wall and floor tiles. The Diamond for Hard Ceramics Hole Saw features Bosch´s unique power-change adapter with the fastest arbour system on the market. It allows for locking and unlocking the hole saw and pilot drills in one click. It is suitable for use with corded and cordless drill drivers. • Cuts Through the Hardest Tiles • Diamond for Hard Ceramics Hole Saw cuts through the hardest tiles • D…