Car Jacks

The Laser 6734 has a low profile design that allows access to chassis legs and deeper set jacking points, right up to the useful maximum height of 500mm. This model also benefits from a twin pump for a faster lifting and this unit is designed to withstand use in the most demanding professional environments. The jack weighs 34kg and is manufactured to the EN1494:2000 technical safety standard. Completing this handy Jack is a robust design and build making it the ideal addition to a workshop or garage.

High quality, ultra-strong bottle jack - designed for effortless lifting. Can be used vertically or angled to 3 degrees from a vertical position. Features and Benefits Features a wide, rugged base that provides excellent stability and strength Provides peace of mind - all critical stress points on the jacks are reinforced for added durability and dependability Cast iron bases with a steel cylinder housing and an adjusting notched saddle Fitted with an overload protection valve Typical Applications Suitable for lifting or positioning vehicles, machinery, houses and/or other building structures but after lifting, loads must be immediately supported by jack stands Standards Met Complies with the …

VEVOR Pneumatic Jacks,6600 lbs(3.0Ton) Pneumatic Car Jack with Portable Handle,triple bag jack Thickened Rubber for soft and easy to collapse terrain, water on sand or muddy roads6600lbs Loading Capacity5.3"-15.75" Lifting RangeSolid ConstructionEasy OperationEasy to StoreWide ApplicationMin. Height: 135 mm / 5.3 inches,Lifting Time: 5 Sec,Max. Height: 400 mm / 15.75 inches,Gross Weight: 43 lb/19.5 kg,Capacity: 3.0 tons / 6600 lbs,Air Inlet: G1/4,Color: Red,Model: Red Triple Bag Jack,Material: Steel + Rubber,Working Temp: -60℃~ 50℃

Professional quality bottle jack with a telescopic two stage hydraulic ram and screw extension provides a much greater maximum while maintaining a low minimum height level.- 12 Tonne Capacity- Height range - mm : 235-580- Heavy duty machine welded base for increased stability and reliability- 3 piece pumping handle- Carrying handle- Complies with latest European standardsPTDCLA7621795

Protective Rubber Pad for trolley jack 1pcs designed for BMW models Jack Pad Size: 71 x 25mm Made of high quality rubber, will not damage the vehicle. Intended for BMW | Suitable for most floor jacks and lifts This is a high-quality HEYNER German product

Set of 2.25 Tonne Trolley Jack and 2 x Axle Jack Stand 2 tons Quality lifting equipment for vehicle repair and tyre change | Heavy duty quality Excellent stability with 2 special bearing wheels Trolley Jack Lifting range: 135-330 mm | Axle Jack Stand Min. lifting height 282mm Max. lifting height 430mm

Bottle jack, with hydraulic unit, max. load 3 t. Supplied = assembled. Max. load = 3 t. Lifting range with lifting head = 168 - 318 mm. Lift = 100 mm. Weight = 2.3 kg. Overall height from - to = 168 - 318 mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can also be unscrewed by means of a thread. The bottle jack is a reliable tool in the workshop and as a vehicle accessory.

The CTJ1500QULP is made from heavy duty steel and combines the benefits of an ultra low profile and a quick lift trolley jack. These features are very useful for rapid operation on very low cars making it ideal for motor sports and mobile operators.- Ultra low profile - 72mm min saddle height - 607mm Max Saddle Height- Foot pedal for quick lift to vehicle contact point - Quick lift to max height in only 8 strokes- Long Reach and High Lift with Non-Marking Wheels- Automatic pressure relief vPTDCLA7623075

0.2 kg

The WINNTEC® from SIP 12 TON Trolley Jack Stands offer mobility and heavy-duty load support, utilising a heavy-duty pin support column, for safe and simple adjustment, and a manoeuvrable design with wheels for easy positioning in all applications. Suitable for professional garages and workshops. KEY FEATURES 302mm to 450mm lifting height range Pin-type support column with wide base to spread weight Mobile design with wheels for easy stand positioning Supplied as a pair of stands for extra support WINNTEC® from SIP 3-Year Warranty

Zinc Plated Side Winding Parking/Lifting Jack with Round Fixing Tube supplied with Inner Tube for welding. Height Retracted 530mm, Height Extended 905mm, Box Size 60mm, Square Base Diameter 200mm, Load Capacity 3000kg

VEVOR Hydraulic Bottle Jack, 12 Ton/24000 LBS All Welded Bottle Jack, 190-355 mm Lifting Range, with 3-section Long Handle, for Car, Pickup Truck, Truck, RV, Auto Repair, Industrial EngineeringSmall But PowerfulPremium MaterialEasy to OperateMaintenance MethodCompact and PortableWide ApplicationsItem Model Number: QJD-01-012A,Max. Capacity: 26455 lbs/12 Ton,Net Weight: 12.8 lb/5.8 kg,Lifting Range: 7.5-14 inch/190-355 mm,Product Size: 5.4×4.9×7.5 inch/138×124×190 mm

Made primarily for the motor racing enthusiast this jack weighs in at just 17.6kg. Utilises many weight saving techniques such as a skeletal lift arm. Features Rocket Lift by use of twin pistons bringing saddle to maximum height in minimal pumps. Polyurethane wheels for smooth and quiet manoeuvring which also limits damage to garage floors. Lifting bars are fitted either side of the anodised aluminium chassis enabling fast lightweight pick-up.1.8 Tonne Aluminium Low Profile Trolley Jack with Rocket Lift• Min./Max. Saddle Height: 85/425mm allowing low entry.• Chassis Length: 637mm.• Made primarily for the motor racing enthusiast this jack weighs in at just 17.6kg.• Utilises many

2.5 Tonne trolley jack suitable for 4 x 4s, light vans and cars. Includes adjustable saddle extension for when extra lifting height is required. Versatile lifting range of 150mm to 440mm without extension and 530mm with extension added, with a quick lift side lever for raising to lifting point with only one pump needed. All steel construction frame and wheels with heavy duty cast iron pump. Built in pump overload prevents over loading for safe operation with hydraulic bypass system to stop ram over travel. Product size: 680 x 290 x 190mm, weight 21.5kg, packaged in colour box.