Car Jacks

Manufactured from high quality translucent virgin HDPE plastic. Suitable for storing and dispensing water. Supplied with integral 360° swivelling tap and easy flow screw vent. Sold loose.

• DESIGNED FOR THE JACKING POINTS - protects and prevents damage to jacking points, side skirts and the underside of the vehicle.• HIGH QUALITY RUBBER - providing a sturdy and durable point of contact.• SECURE FIT TO VEHICLE - moulded to fit bespoke vehicle fitting.Technical SpecificationApplication(s): Mercedes-Benz, W213/S213/C238/A238 (2016 on), GLK-Class X204 (2008 - 2015), GLE, GLS C167/V167/X167 (2018-on), CLS C257 (2017 on), W205/A205/S205 (2013-on), S-Class W222/V222/X222/C217/A217 (2013-on), M-Class, GL-Class, GLS W166/X166 (2011-on), GLE Coupe C292 (2015 -2019), GLC C253/X253 (2015-on), AMG GT X290 (2018-on)Nett Weight: 0.56kg

Perfect for garage use, or for the home motor enthusiast, these durably constructed car ramps can be used together to lift vehicles of 2000kg or less to provide access for maintenance purposes. They can also be used to gain the clearance needed to insert a bottle jack. The solid frames of the ramps are fitted with rungs to prevent slippage of the wheel after the car has been raised, & an extended rear face allows the car ramps to be stood upright for convenient, space saving storage. For low ground clearance vehicles, an extension is available for purchase separately (part number: RM1). Specifications: • Capacity per Pair: 2000kg • Length: 790mm • Car Ramp Height: 250mm • …

• Heavy-duty trailer jack with swivel mounting.• Suitable for handling trailers with heavy nose weight.• Integral swivel weld-on mounting.• Min./Max. Height: 230/480mm.Heavy-duty trailer jack with swivel mounting. Suitable for handling trailers with heavy nose weight. Integral swivel weld-on mounting.• Heavy-duty trailer jack with swivel mounting. • Suitable for handling trailers with heavy nose weight. • Integral swivel mounting. • Min./Max. Height: 230/480mm • Model No. TB373Technical Specification:Capacity: 900kgMaximum Height: 480mmMinimum Height: 230mmNett Weight: 4.62kgDimensions: Length: 253mm x Height: 125mmWeight: 5.136KgWarranty: 1 year

Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are softer than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 2 tonne x 1 metre

Weight-for-weight, this strap is three to five times stronger than chain and has the advantage that overload can be detected early by the fraying of the strap. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capacity: 1000kg • …

• Manufactured from durable polypropylene.• Suitable for professional or serious DIY applications.Manufactured from durable polypropylene. Suitable for professional or serious DIY applications.• 3tonne Capacity per pair. • Manufactured from durable polypropylene. • Suitable for professional or serious DIY applications. • Overall Dimensions (L x W x H): 900 x 300 x 215mm. • Maximum Tyre Width: 260mm. • Model No. CAR3000CTechnical Specification:Capacity Pair: 3000kgMaximum Tyre Width: 260mmNett Weight: 0.00kgOverall Dimensions (L x W x H): 900 x 300 x 215mmRamp Height: 160mmDimensions: Length: 330mm x Height: 315mmWeight: 9.76KgWarranty: 1 year

• Increases the stability of the motorcycle by clamping the bottom and front of the tyre.• Features a pivot clamp which locks the front wheel securely by the motorcycle weight.• Suitable for fitting on trailers, in vans or to motorcycle lifts (requires suitable fixings).• Fully adjustable to fit wheels ø13"-21"(380-535mm).• Minimum/Maximum Tyre Width: 50-130mm.• Please note: Motorcycle must also be secured using tie down straps.• Fittings not supplied.Increases the stability of the motorcycle by clamping the bottom and front of the tyre. Features a pivot clamp which locks the front wheel securely by the motorcycle weight. Suitable for fitting on trailers, in vans or to motorcycle lifts (require…

Expert Quality, polyester webbing, 60mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 2000kg for a load at one end (straight configuration) and 4000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type C design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type C. Profile Depth 15mm. Size ø94.5mm. Fits saddle ø95mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type C. • Profile Depth: 15mm. • Size: ø94.5mm. • Fits saddle ø95mm. • Model No. JP13Technical Specification:Nett Weight: 0.09kgJack Pad Size: ø94.5mmStyle: Type CProfile Depth: 15mmTo Fit Saddle Size: ø95mmWeight: 0.17kgDimensions: Length: 15mm x Height: 190mmWeight: 0.1KgWarranty: Consumable

Expert Quality, for stabilizing HGVs whilst parked. Manufactured from anti-slip, non-sparking, highly visible weatherproof heavy duty HDPE plastic. Sold loose as single chock.