Car Jacks

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Depth 7.5mm. Size ø86mm. Fits saddle ø83-88mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 7.5mm. • Size: ø86mm. • Fits saddle ø83-88mm. • Model No. JP11Technical Specification:Nett Weight: 0.045kgJack Pad Size: ø86mmStyle: Type BProfile Depth: 7.5mmTo Fit Saddle Size: ø83-88mmWeight: 0.045kgDimensions: Length: 10mm x Height: 190mmWeight: 0.05KgWarranty: Consumable

Accepts a wide variety of engines and transmissions. The heads swivel 360 for accessibility to all parts of the engine. Fully adjustable mounting arms. Swivel castors provide excellent manoeuvrability.

Trolley Jack / Max Load 2 t / Hubhöhe 505 mm / Unterfahrhöhe 75 mm / 32.5 kg / Cushions / Lifting Positions 6

• Fitted with overload valve. • Base and reservoir machine welded for increased strength and eliminates leakage. • Supplied with 2-piece handle.• 3 Year guarantee*.Technical SpecificationCapacity: 50 TonneHydraulic Lift: 160mmMaximum Height: 425mmMinimum Height: 265mmNett Weight: 25.3kgScrew Extension: N/ATechnical Specification:Capacity: 50 Tonne Hydraulic Lift: 160mm Maximum Height: 425mm Minimum Height: 265mmDimensions: Length: 270mm x Height: 300mmWeight: 25.5KgWarranty: 3 years

• Two rubber wheel chocks.• Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°.Two rubber wheel chocks. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Suitable for vehicles below 5 tonne.• Two rubber wheel chocks. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12 degrees. • Suitable for vehicles below 5tonne. • Model No. WC02Technical Specification:Applications: Suitable for vehicles below 5tonneDimensions (W x D x H): 115 x 270 x 175mmMaterial: RubberNett Weight: 6.13kgWeight Each: 3.3kgDimensions: Length: 215mm x Heig…

Expert Quality, polyester webbing, 50mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 1000kg for a load at one end (straight configuration) and 2000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

Heavy-duty chassis with strengthening flanges along the top edge for extra torsional rigidity under load. Profiled lifting arm allows low clearance height of just 85mm making this unit suitable for sports and custom cars. Fitted with heavy-duty one-piece hydraulic unit with pump-through action preventing handle locking at maximum ram extension. White saddle aids positioning under vehicle and safety valve prevents overloading.

Weight-for-weight, this strap is three to five times stronger than chain and has the advantage that overload can be detected early by the fraying of the strap. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capacity: 1000kg • …

Manufactured from high quality translucent virgin HDPE plastic. Suitable for storing and dispensing water. Supplied with integral 360° swivelling tap and easy flow screw vent. Sold loose.

Flat arm with spring loaded roller bearings for use with SJBEX3000S and SJBEX4000S Jacking Beams. When unloaded these arms support the weight of the beam, allowing for it to run smoothly along the pit edge. In position, and when the beam is under load, the bearings retract, to leave the flat of the arm, to stabilise the lift.Features & Benefits:• Flat arm with spring loaded roller bearings for use with SJBEX3000S and SJBEX4000S Jacking Beams.• When unloaded these arms support the weight of the beam, allowing for it to run smoothly along the pit edge.• In position, and when the beam is under load, the bearings retract to leave the flat of the arm to stabilise the lift.• Model No. SJBEX.A01Speci…