Car Jacks

Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are softer than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 1 tonne x 1 metre

Weight-for-weight, these straps are three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capac…

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type A design.• Fits over the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type A. Profile Depth 31.7mm. Size ø157mm. Fits saddle ø138-142mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type A. • Profile Depth: 31.7mm. • Size: ø157mm. • Fits saddle ø138-142mm. • Model No. JP07Technical Specification:Nett Weight: 0.13kgJack Pad Size: ø157mmStyle: Type AProfile Depth: 31.7mmTo Fit Saddle Size: ø138-142mmWeight: 0.13kgDimensions: Length: 20mm x Height: 280mmWeight: 0.4KgWarranty: Consumable

• Heavy-duty nylon reinforced rubber wheel chock.• Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°.• Features robust carry handle that can also be fitted with a rope or chain (not included).• Suitable for commercial, agricultural and aircraft tyres of diameter ø1500-1800mm.Heavy-duty nylon reinforced rubber wheel chock. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Features robust carry handle that can also be fitted with a rope or chain (not included). Suitable for commercial, agricultural and aircraft tyres of diameter ø1500-1800mm. Suitable for vehicles below 40…

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type C design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type C. Profile Depth 22mm. Size ø99mm. Fits Saddle ø96.5-99mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type C. • Profile Depth: 20mm. • Size: ø99.5mm. • Fits saddle ø98-103mm. • Model No. JP19Technical Specification:Nett Weight: 0.135kgJack Pad Size: ø99.5mmStyle: Type CProfile Depth: 20mmTo Fit Saddle Size: ø98-103mmWeight: 0.135kgDimensions: Length: 20mm x Height: 165mmWeight: 0.138KgWarranty: Consumable

Expert Quality, polyester webbing, 50mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 1000kg for a load at one end (straight configuration) and 2000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

Heavy-duty trailer jack with swivel mount used to jack trailer into position. Suitable for handling trailers with heavy nose weight. Integral swivel weld-on mounting. Height adjustment handle for ease of use. Zinc-plated finish helps resist corrosion. Load bearing capacity 900kg.

• Suitable for use with our lever hoists or chain blocks.• Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways.• Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer.Suitable for use with our lever hoists or chain blocks. Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer.• Suitable for use with our lever hoists or chain blocks. • Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. • Incorporates wheel guards to prevent contact with other trolleys mounted on same load…

• Fitted with overload valve. • Base and reservoir machine welded for increased strength and eliminates leakage. • Supplied with 2-piece handle.• 3 Year guarantee*.Technical SpecificationCapacity: 5tonneHydraulic Lift: 125mmMaximum Height: 402mmMinimum Height: 207mmNett Weight: 3.95kgScrew Extension: 70mmTechnical Specification:Capacity: 5tonne Hydraulic Lift: 125mm Maximum Height: 402mm Minimum Height: 207mmDimensions: Length: 126mm x Height: 220mmWeight: 4.03KgWarranty: 3 years

Expert Quality, polyester webbing, 120mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 4000kg for a load at one end (straight configuration) and 8000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.