Car Jacks

• Fitted with overload valve. • Base and reservoir machine welded for increased strength and eliminates leakage. • Supplied with 2-piece handle.• 3 Year guarantee*.Technical SpecificationCapacity: 5tonneHydraulic Lift: 125mmMaximum Height: 402mmMinimum Height: 207mmNett Weight: 3.95kgScrew Extension: 70mmTechnical Specification:Capacity: 5tonne Hydraulic Lift: 125mm Maximum Height: 402mm Minimum Height: 207mmDimensions: Length: 126mm x Height: 220mmWeight: 4.03KgWarranty: 3 years

Made primarily for the motor racing enthusiast, this jack weighs in at just 18.1kg. Utilises many weight saving techniques such as a skeletal lift arm. Features Rocket Lift by use of twin pistons, bringing saddle to maximum height in minimal pumps. Polyurethane wheels for smooth and quiet manoeuvring, which also limits damage to garage floors. Lifting bars are fitted either side of the anodised aluminium chassis enabling fast, lightweight pick-up. Features & Benefits: • Min./Max. Saddle Height: 90/455mm. • Chassis Length: 682mm. • Made primarily for the motor racing enthusiast, this jack weighs in at just 18.1kg. • Utilises many weight saving techniques such as skeletal lift arm. • Features R…

Expert Quality, polyester webbing, 50mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 1000kg for a load at one end (straight configuration) and 2000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• Increases the stability of the motorcycle by clamping the bottom and front of the tyre.• Features a pivot clamp which locks the front wheel securely by the motorcycle weight.• Suitable for fitting on trailers, in vans or to motorcycle lifts (requires suitable fixings).• Fully adjustable to fit wheels ø13"-21"(380-535mm).• Minimum/Maximum Tyre Width: 50-130mm.• Please note: Motorcycle must also be secured using tie down straps.• Fittings not supplied.Increases the stability of the motorcycle by clamping the bottom and front of the tyre. Features a pivot clamp which locks the front wheel securely by the motorcycle weight. Suitable for fitting on trailers, in vans or to motorcycle lifts (require…

• Replacement hydraulic ram for SPC1000 engine crane.Replacement hydraulic ram for SPC1000 engine crane.• Replacement hydraulic ram for SPC1000 engine crane. • Model No. SPC1000.28Technical Specification:Nett Weight: 13kgRam Capacity: 5000kgRam Diameter: 31.92mmRam Travel: 585mmPump Type: Twin SpeedRam Pin Hole Diameter: 18.0mmClevis Pin Hole Diameter: 27.5mm*Mounting Point Distance (Min.): 706mm**Overall Length (Min): 763mmBase Mount Type: Spigot Mounted * Internal diameter of spigot mount ** From base plane to ram pin centreDimensions: Length: 100mm x Height: 110mmWeight: 12.972KgWarranty: Consumable

Faithfull Lifting Slings are made from 100% PES polyester duplex webbing that is lightweight but extremely durable for use on awkward loads, offering a soft alternative to wires and chains. All sizes can be used in straight pull, basket or choke configurations. Fitted with a reinforced, sleeved lifting eye. Meets the requirements of EN 1492 Part 1:2000. Minimum breaking load is 7 times the Working Load Limit.The Faithfull Green Lifting Sling has the following specifications: Max. Load: 2 Tonne.Width: 60mm.Length: 3m.Additional Information:• Length: 3.0m• Type: Lifting Sling• Load Capacity: 2000kg• Breaking Strength: 14000kg

The Carasafe Ratchet Caravan Jack is good quality and sturdy. It has an integrated ratchet operation for easier lifting and lowering, supplied with the wrench handle. Maximum lifting capacity of 1000kg.A caravan jack with integrated ratchet operationWrench handle includedMaximum lift: 1000kgWeight: 2.2kgDimensions: 380 x 95 x 80mmMin / Max height: 100mm / 350mm

• MOT COMPLIANT - Fully Certified and approved to comply with MOT requirements.• SAFETY LOCK - Three stage mechanical safety lock prevents accidental injury.• WIDE REACH - Meets MOT recommendation for lifting on jacking point.• ROLLER WHEELS - Allows easy movement up and down the lift or inspection pit.• 2 YEAR GUARANTEE*.Technical SpecificationAir Pressure: 109-174psiBeam Lift: 250mmCapacity: 2000kgLoad Arm Reach: 675-1510mmNett Weight: 117kgOptional Accessories: N/ACompatible Lifting & Support Accessories: SJBEX.A02, SJBEX.A03, SJBEX.A05, SJBEX.A06, SJBEX.A07Support Arm Reach: 905-1315mmTechnical Specification:Capacity: 2000kgDimensions: Length: 520mm x Height: 310mmWeight: 134KgWarranty: 2 years…

The Sealey VS0110 Under Vehicle Engine/gearbox Support is ideal when replacing clutches or timing belts The Sealey VS0110 is an under vehicle engine/gearbox support that is fully adjustable, making the unit suitable for most transverse and in-line configurations. Designed to support the engine or gearbox when mountings or gearbox are being removed. This unit removes the need for using a transmission jack or engine support beam. Features:
- Ideal when replacing clutches or timing belts
- Removes the need for using a transmission jack or engine support beam
- Fully adjustable, making the unit suitable for most transverse and in-line configurations
- Designed to support the engine or gearbox …

Single-piece hydraulic unit with heavy base design. Integral cog-type release mechanism and long 2-piece handle. Protective jack handle sleeve helps prevent accidental damage to car bodywork when pumping the handle. Heavy-duty castors and extra-large saddle design ease positioning under vehicle. Fitted with safety overload valve and pump-through valve to prevent handle locking at maximum ram extension. Ideal for loaded vans up to 3.5 Tonne GVW. Features & Benefits: • Min./Max. Saddle Height: 130/520mm. • Chassis Length: 659mm. • Integral cog-type release mechanism and long 2-piece handle. • Heavy-duty swivel castors and extra-large saddle design ease positioning under vehicle. • Fitted with safet…