Car Jacks

Suitable for use with our lever hoists or chain blocks. Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. Geared block trolleys make it easier to move heavy loads along the gantry by using chain rather than manual handling. Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer. Features & Benefits: • Suitable for use with our lever hoists or chain blocks. • Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. • Geared block trolleys make it easier to move heavy loads along the gantry by using chain rather than manual handling. • Incorporates wheel guards to prevent contact with other tr…

Saves floor/cabinet space by enabling axle stands to be mounted securely to a wall. Axle stand is held firm horizontally by hooking onto cross brace, without the risk of falling. Supplied with wall mounting fasteners. Suitable for Sealey axle stands AS6, AS5000, AAS5000 and VS2006 ranges as well as most other brands of axle stand. Features & Benefits: • Saves floor/cabinet space by enabling axle stands to be mounted securely to a wall. • Suitable for Sealey axle stands AS6, AS5000, AAS5000 and VS2006 ranges as well as most other brands of axle stand. • Axle stand is held firm horizontally by hooking onto cross brace, without the risk of falling. • Supplied with wall mounting fasteners. • Model…

Optional Bobbin Support for Model No. RPS2 and RPS2KD. Designed to give extra support and added stability once rear axle has been located and raised. Yellow phosphate finish for added corrosion resistance. Features & Benefits: • Optional Bobbin Support for Model No. RPS2 and RPS2KD. • Designed to give extra support and added stability once rear axle has been located and raised. • Yellow phosphate finish for added corrosion resistance. • Model No. RPS1BS Specifications: Model No RPS1BS Brand: Sealey Length: 105mm Nett Weight: 0.34kg Quantity: 2

Expert Quality, polyester webbing, 50mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 1000kg for a load at one end (straight configuration) and 2000kg for a load between the loop eyes ('U' configuration). Manufactured to BS EN1492 1+A1 Contents: 1 x Load Sling Wide, 4m x 50mm, 1 Tonne

Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are softer than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 2 tonne x 2 metre

Sealey FCR500 Steel Folding Loading Ramps 500kg Capacity Per Pair The Sealey FCR500 are Steel Folding Loading Ramps with a capacity of 500kg per pair. The loading ramps are manufactured from strong, durable powder-coated steel, providing safe and easy ramp access for in-line and multi-axle vehicles. These loading ramps are suitable for loading/unloading motorbikes, quads, ride-on lawnmowers and mini tractors from vans or trailers Features:
- Folding design allows compact storage when not in use
- Manufactured from strong, durable powder-coated steel
- Features a strap and hook to help secure ramps while in use
- Provides safe and easy ramp access for in-line and multi-axle vehicles …

Manufactured from 3.5mm steel section. Corrosion resistant finish. Ramps stack together and will stand upright for easy storage. BS Approved. Features & Benefits: • 2 Tonne Capacity per pair. • Manufactured from 3.5mm steel section. • Ramps coated with corrosion resistant finish. • Ramps stack together and will stand upright for easy storage. • Maximum Tyre Width: 200mm. • BS Approved. • Model No. CAR2000 Specifications: Model No CAR2000 Brand: Sealey Capacity Pair: 2000kg Maximum Tyre Width: 200mm Nett Weight: 14.35kg Overall Dimensions (L x W x H): 800 x 345 x 250mm Ramp Height: 190mm

This trolley jack features an extra-fast single lifting pump to ensure it reaches full height in just 2.5 strokes. It has a low profile design making it ideal for vehicles with a reduced clearance height, enabling a lifting range from 78-510mm. There is an integrated rubber saddle pad to prevent damage to the underside of the vehicle when in operation. Fitted with hardwearing nylon wheels with rear swiveling castors, for quiet and smooth operation. These wheels also prevent damage to garage floors. There is a safety valve to prevent the jack from overloading. Manufactured to EN1494 SpecificationContents:1 x Draper Expert Professional Low Profile Fast Lift Garage Trolley Jack, 3 Tonne, BlackSpecifications:Capacity: …

Completely freestanding wheel storage trolley for all types of wheels with rim size over Ø225mm. Easy to assemble. The rack has four locking castors for easy manoeuvring around the garage. Eliminates tyre distortion due to loss of tyre pressure. Supplied with rim protecting supports. Features & Benefits: • Freestanding wheel storage trolley for all types of car wheels. • Stores wheels with rims over Ø225mm. • Rack has four locking castors for easy manoeuvring. • Eliminates tyre distortion due to loss of tyre pressure. • Easy to assemble. • Supplied with rim protecting supports. • Overall Size (W x D x H): 460 x 460 x 1160mm. • Maximum Weight Capacity: 100kg (25kg per Level). • Model No. STR00…

Expert Quality, polyester webbing, 120mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 4000kg for a load at one end (straight configuration) and 8000kg for a load between the loop eyes ('U' configuration). Manufactured to BS EN1492 Contents: 1 x Wide Load Sling, 5m x 120mm, 4 Tonne