Car Jacks

• Made from durable polypropylene.• These ramps are designed to allow jacking access to suitable jacking points on the vehicle.• Not intended to raise a vehicle enough for under vehicle servicing.Made from durable polypropylene. These ramps are designed to allow jacking access to suitable jacking points on the vehicle. Not intended to raise a vehicle enough for under vehicle servicing.• 3tonne Capacity per pair. • Made from durable polypropylene. • These ramps are designed to allow jacking access to suitable jacking points on the vehicle. • Not intended to raise a vehicle enough for under vehicle servicing. • Overall Dimensions (L x W x H): 700 x 200 x 80mm. • Model No. CAR3000LRTechnical Specification:Capa…

• Two rubber wheel chocks.• Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°.Two rubber wheel chocks. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Suitable for vehicles below 5 tonne.• Two rubber wheel chocks. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12 degrees. • Suitable for vehicles below 5tonne. • Model No. WC02Technical Specification:Applications: Suitable for vehicles below 5tonneDimensions (W x D x H): 115 x 270 x 175mmMaterial: RubberNett Weight: 6.13kgWeight Each: 3.3kgDimensions: Length: 215mm x Heig…

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Depth 14.5mm. Size ø95mm. Fits saddle ø95-97mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 14.5mm. • Size: ø95mm. • Fits saddle ø95-97mm. • Model No. JP14Technical Specification:Nett Weight: 0.15kgJack Pad Size: ø95mmStyle: Type BProfile Depth: 14.5mmTo Fit Saddle Size: ø95-97mmWeight: 0.15kgDimensions: Length: 20mm x Height: 190mmWeight: 0.15KgWarranty: Consumable

For repairs and maintenance. Suitable for most standard cars. Ramp height 200mm; tyre/wheel width 180mm. Extensions are available to lower the angle for low ground clearance vehicles Stock No 23306. Sold loose.

Designed for the jacking points to protect and prevent damage to side skirts and battery. Made from high quality rubber, providing a sturdy and durable point of contact. Features a rubber O-ring on the spigot, creating a secure fit to the vehicle. Designed for the jacking points to protect and prevent damage to side skirts and battery. Made from high quality rubber, providing a sturdy and durable point of contact. Features a rubber O-ring on the spigot, creating a secure fit to the vehicle.

Expert Quality, polyester webbing, 150mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 5000kg for a load at one end (straight configuration) and 10,000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• Increases the stability of the motorcycle by clamping the bottom and front of the tyre.• Features a pivot clamp which locks the front wheel securely by the motorcycle weight.• Suitable for fitting on trailers, in vans or to motorcycle lifts (requires suitable fixings).• Fully adjustable to fit wheels ø13"-21"(380-535mm).• Minimum/Maximum Tyre Width: 50-130mm.• Please note: Motorcycle must also be secured using tie down straps.• Fittings not supplied.Increases the stability of the motorcycle by clamping the bottom and front of the tyre. Features a pivot clamp which locks the front wheel securely by the motorcycle weight. Suitable for fitting on trailers, in vans or to motorcycle lifts (require…

Expert Quality, polyester webbing, 60mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 2000kg for a load at one end (straight configuration) and 4000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). All duplex slings are manufactured to the European lifting sling standard, giving a 7:1 safety factor. Each sling is individually numbered for traceability and is supplied with a certificate of conformity.Working Load Limit: 1 tonne x 4 metre

Base and reservoir machine welded for increased strength and reduced chance of leakage. Fitted with overload valve. Supplied with 2-piece handle. Supplied in a tough storage case and suitable for recovery trucks. The case prevents the jack from damaging other items and also prevents the spread of grease, oil or dirt. Features & Benefits: • Min./Max. Height: 175/339mm. • Fitted with overload valve. • Base and reservoir machine welded. • Supplied with 2-piece handle. • Tough storage case. • Model No. SJ2BMC Specifications: Model No SJ2BMC Brand: Sealey Capacity: 2 Tonne Hydraulic Lift: 116mm Maximum Height: 339mm Minimum Height: 175mm Nett Weight: 3.00kg Screw Extension: 48mm

Scissor Jack / Max Load 1.5 t / 2.5 kg