Power Saws

Bosch Expert Sheet Metal Hole Saw For Long Life Cutting Holes In Stainless Steel: Cutting Holes In Sheets Of Steel Is Not Like Other Hole Saw Applications. In Industrial Settings, Or When Working On Vehicles, You Have To Be Extremely Precise – But At The Same Time The Material Is Hard And Destroys Traditional Bimetal Hole Saws. The Expert Sheet Metal Solves All These Issues In One Compact Piece Of High Quality Engineering. This Hole Saw Packs All The Best Qualities Into Its Short Stature: It Is Long Lasting, Accurate, And Optimised For Quality Sheet Metal Work.Features:- Long Life Cutting Holes In Stainless Steel- Exceptional Durability Is Built In With Bosch Carbide Technology.- Individually Gr…

Bahco Superior™ Multi Construction Holesaws have carbide tips and are capable of cutting through brick and ceramic tiles, laminate, fibreglass and hardwood. The tooth tips consist of a carbide round rod which is fusion welded to the back material, the tip is then ground to its final shape with a 5° positive cutting angle. They have a low friction coating that minimises heat generation and wide gullets for effective chip removal. They fit all power drills, both stationary and portable.Bahco Multi Construction Holesaw 3833-44-C Carded Size: 44mm.Additional Information:• Size: 44mm• Material: TCT

Most Hole Saws For Wood And Metal Seem To Work Fine Until You Hit A Hardened Nail Or Screw. Then They Scream And Smoke And Grind Until Their Teeth Are Torn Off, And You Still Only Have Half A Hole. With Its Carbide Teeth, The Expert Tough Material Barely Slows Down When It Hits Metal It Cuts Neatly Through And Keeps On Cutting Holes, Time And Again. The Bosch Expert Tough Material Hole Saw Great All-Rounder For Every Tradesman Because Half A Hole Is Not Even Worth Half A Hole.Features:- Long Life Cutting Holes In Multi Material- Exceptional Durability Is Built In With Bosch Carbide Technology.- Individually Ground Teeth Made From Fine, Hard Carbide.- For Use With The Bosch Power Change Plus …

It is suitable for use with all corded and cordless drill drivers. The BiM Progressor Hole Saw offers 2x longer lifetime than its predecessor. It has been redesigned with Bosch Bi-Metal with 8% cobalt alloy for increased durability. Additionally, it has an enhanced progressive tooth strip that enables faster cuts. Use this hole saw when drilling holes in wood, drywall, plastics, metal, non-ferrous metal and stainless steel. BIM Progressor Hole Saw offers 2x longer lifetime than predecessor • 2x Longer Lifetime Than Predecessor • BiM Progressor Hole Saw offers 2x longer lifetime than predecessor • Redesigned with Bi-Metal with 8% cobalt alloy for increased durability • Enhanced …

Diamond Cutter Dry Speed Delivers Long Life When Dry Drilling Hard Ceramics.Features:- High-Class Diamonds Provide Very High Drilling Speeds- Vacuum-Brazing Technology Ensures Long Lifetime- With 22.23 Mm Bore For Standard Locking Nut Angle Grinders.Specifications:- Diameter (D) Mm: 45- Total Length (L2) Mm: 35

The Special for Sheet Metal Hole Saw offers durability while cutting holes through metal. Made of bi-metal HSS (high-speed steel) containing 8% cobalt alloy, this hole saw has less risk of tooth breakage and higher heat resistance for extreme resilience and a long product lifetime. The configuration of the teeth on the Vario tooth strip is ideal for sawing through thin material with reduced wear on the cutting edge. Furthermore, a depth-stop feature prevents breakthroughs to protect the work surface. Use this hole saw when cutting through sheet metal with a thickness of less than 5 mm, such as mild steel and stainless steel. The Special for Sheet Metal Hole Saw features Bosch's unique power-change …

HSS Bi-Metal variable pitch tooth 4-btpi with 5% cobalt content for high durability and extended working life. Suitable for wood, gypsum board, plastics, non ferrous metals, aluminium, steel and stainless steel. Large range from 14-152mm with hex and SDS adaptors and extra long pilot drill. Features & Benefits • High durability and extended working life • Large range from 14-152mm • Application: Holes, conduit, piping, sheet metal, channelling, trunking, lighting Specifications • Diameter: 114 mm • Arbor Part Number: P-35162 / P-35184 • Pack Quantity: 1

The Bi-Metal holesaw range have a vari-pitch tooth design and are recommended for cutting steel, aluminium, copper, brass, wood and plastic. Also available in plumbers and electricians kits with the most popular sizes. Arbors available with hex (3 jaw chuck) and SDS Plus shanks. Ideal for trunking, conduit, pipe, kitchen & bathroom installations, hardwood, softwood, mild Steel, aluminium & PVC. Specifications • Bi-metal holesaws with variable tooth pitch • Recommended for cutting steel, aluminium, copper, brass, wood and plastic • Arbors available with hex (3 jaw chuck) and SDS Plus shanks Specifications • Diameter: 140 mm • Arbor Part Number: D-17186 • Pack Quantity: …

Tungsten Carbide Tipped (TCT) Multi Purpose hole saws feature a unique tooth set for an ultra-aggressive, high performance cutting of non-metallics. Rapid, heat-free stock removal of wood, MDF, plastics, and ceramic tiles, with a 54mm (2.1/8") cutting depth. Power through wood, MDF, plastics, plasterboard and ceramic wall tiles up to five times faster than a bi-metal hole saw. Carbide Tipped teeth for outstanding cutting performance and product durability. Cutting depth of 54mm (2.1/8”). Smooth cut with minimal heat build up. Suitable for use in mains and battery powered tools. Special arbors featuring extended length pilot drills are availableTeeth per Inch (25mm): 1Teeth Type: Tungsten Carbide Ti…

High performance hole saws for drilling small diameter holes in non-metallics. The ideal solution for the toughest cutting situations. Featuring a diamond coated cutting edge permanently bonded to a tough steel body, the Starrett Diamond Grit hole saw provides the necessary clearance for cutting at high speeds. Rapid cutting solution for non-metallics. Small diameter hole saws are perfect for kitchen and bathroom installations. Smooth surface finish, ideal when cutting glass and ceramics. Supported by a comprehensive range of arbors with carbide tipped pilot drills. The ultimate hole saw for hard-to-cut materialsTeeth Type: Synthetic diamond gritCountry of Origin: CN Specifications: Diameter …

Ideal for cutting stainless and high alloy steels, non-ferrous light metals and reinforced fabrics, all at a much faster speeds than bi-metal hole saws. Perfect for production cutting and particularly suitable for use in drills with limited speed control.• Split-point drill for faster penetration and self-centring • Ideal for production cutting, and particularly suitable for use in drills with limited speed control • Fitted with ejector spring for easy core removal • Step drill for faster cuts in thinner materials • Tungsten carbide tipped teeth provide superb product life and cutting performance • Safety stop at the base of the hole saw prevents drilling beyond the maximum cutting depth of 13m…

The Deep Cut Bi-Metal Hole saws combine the aggressive tooth form from our previous Dual Pitch Hole Saws, with the new extra cobalt HSS teeth to provide enhanced heat and wear resistance. Featuring a 10mm increase in hole saw depth and aggressive material penetration and kerf clearance, it is the complete multi-purpose hole saw to penetrate deep into metals, wood, plastic, plaster and other materials. Aggressive material penetration and kerf clearance. Ideal for solid materials or tubes of a wall thickness greater than 3mm. 51mm hole saw depth improves cutting performance on tubes, particularly where there is a need to cut through both sides of the tube. New tooth material for enhanced heat …

The IRWIN bi-metal holesaws have been designed for the professional and made to provide long-lasting performance for use in general construction, electrical installation, plumbing, heating and ventilation, and remodelling applications. The sharp, variable tooth (4-6 pitch) design provides a faster cutting action and enhanced performance in a variety of materials and cutting applications. The bi-metal construction and the electron beam welded teeth give the user a stronger, longer-lasting blade. The IRWIN holesaw range is available from sizes 14 mm (9/16in) to 152 mm (6in), with a line up of high-quality arbors and a pilot drill to cover all application requirements. Cuts a variety of materials …