Power Saws

Tungsten Carbide Tipped (TCT) Multi Purpose hole saws feature a unique tooth set for an ultra-aggressive, high performance cutting of non-metallics. Rapid, heat-free stock removal of wood, MDF, plastics, and ceramic tiles, with a 54mm (2.1/8") cutting depth. Power through wood, MDF, plastics, plasterboard and ceramic wall tiles up to five times faster than a bi-metal hole saw. Carbide Tipped teeth for outstanding cutting performance and product durability. Cutting depth of 54mm (2.1/8”). Smooth cut with minimal heat build up. Suitable for use in mains and battery powered tools. Special arbors featuring extended length pilot drills are availableTeeth per Inch (25mm): 1Teeth Type: Tungsten Carbide Ti…

High performance hole saws for drilling small diameter holes in non-metallics. The ideal solution for the toughest cutting situations. Featuring a diamond coated cutting edge permanently bonded to a tough steel body, the Starrett Diamond Grit hole saw provides the necessary clearance for cutting at high speeds. Rapid cutting solution for non-metallics. Small diameter hole saws are perfect for kitchen and bathroom installations. Smooth surface finish, ideal when cutting glass and ceramics. Supported by a comprehensive range of arbors with carbide tipped pilot drills. The ultimate hole saw for hard-to-cut materialsTeeth Type: Synthetic diamond gritCountry of Origin: CN Specifications: Diameter …

The strong, high performance triple chip Tungsten Carbide Tipped hole saw provides long life when cutting difficult and abrasive materials, such as wood and PVC. It offers a cost effective solution for cutting through nail embedded wood, or virtually any wood and metal combination, reinforced concrete and fibreglass. Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster. Tungsten Carbide Tipped teeth for outstanding cutting performance and product durability. Will cut nail embedded wood or virtually and wood and metal combination, such as wooden doors with metal fascia panels. Cutting depth of 41mm (1.5/8""). Suitable for use …

• Bi-Metal blades.• Professional quality kit.• Sturdy storage case.• Contents: Hole Saws (1 of each); ø16, 20, 25, 32, 40, 51mm, 1 x Simple Arbor, 1 x Quick Release Arbor, 1 x Adaptor.Bi-metal blades. Professional quality kit in metal storage case.Technical Specification:Contents: Hole Saws (1 of each); ø16, 20, 25, 32, 40, 51mm; 1 x Simple Arbor, 1 x Quick Release Arbor, 1 x Adaptor.Dimensions: Length: 70mm x Height: 180mmWeight: 1.048KgWarranty: Consumable

Bahco Sandflex® holesaws are made for high precision cutting of holes from 14 mm to 152 mm diameter in all sawable materials up to 38 mm thick. Suitable for use in portable electric or pneumatic tools, and in a wide variety of drilling, boring, milling and other machine tools. All saws have varipitch (4-6tpi) blades.Cutting edges are in high speed steel for extra hardness, with welded seams for accuracy of cut, and heat-treated bodies for maximum strength.Size: 114 mm. Arbors to suit (available separately). Code Holesaw Size ShankBAH3834930 930 14-30 mm 3/8 Inch (8.5mm).BAH38341130 1130 14-30 mm 7/16 Inch (11.1mm).BAH38349100 9100 32-100 mm 3/8 Inch (8.5mm).BAH383411152 11152 32-210 mm 1/2 …

Bahco 3802 HSS Power Hacksaw Blades have been designed to cut almost any material. Suitable for use on modern machines with skilled operators and a high degree of control.1 x Bahco 3802 HSS Power Hacksaw Blade 400mm (16in) x 1.1/2in x 6 TPIAdditional Information:• Type: 400mm• TPI: 6• Pack Qty.: 38mm

The Diamond for Hard Ceramics Hole Saw cuts through the hardest tiles. Its diamond coating gives this hole saw durability on very strong tiles made from all types of ceramic materials. In addition, the thin cutting edge allows for rapid, clean cuts. Use this hole saw when cutting through wall and floor tiles. The Diamond for Hard Ceramics Hole Saw features Bosch´s unique power-change adapter with the fastest arbour system on the market. It allows for locking and unlocking the hole saw and pilot drills in one click. It is suitable for use with corded and cordless drill drivers. • Cuts Through the Hardest Tiles • Diamond for Hard Ceramics Hole Saw cuts through the hardest tiles • D…

The Diamond for Hard Ceramics Hole Saw cuts through the hardest tiles. Its diamond coating gives this hole saw durability on very strong tiles made from all types of ceramic materials. In addition, the thin cutting edge allows for rapid, clean cuts. Use this hole saw when cutting through wall and floor tiles. The Diamond for Hard Ceramics Hole Saw features Bosch´s unique power-change adapter with the fastest arbour system on the market. It allows for locking and unlocking the hole saw and pilot drills in one click. It is suitable for use with corded and cordless drill drivers. • Cuts Through the Hardest Tiles • Diamond for Hard Ceramics Hole Saw cuts through the hardest tiles • D…

Lasts up to 50x longer than a BiMetal hole saw in tough materialsMost hole saws for wood and metal seem to work fine - until you hit a hardened nail or screw. Then they scream and smoke and grind until their teeth are torn off, and you still only have half a hole. With its carbide teeth, the Expert Tough Material barely slows down when it hits metal – it cuts neatly through and keeps on cutting holes, time and again.Made with Bosch Carbide Technology, each tooth is an optimum grade of the hardest metal, laser welded and ground six times for the perfect cutting shape. This makes the Bosch Expert Tough Material Hole Saw ideal for tough jobs and all-round trades work: As well as wood and metal, i…

Lasts up to 50x longer than a BiMetal hole saw in tough materialsMost hole saws for wood and metal seem to work fine - until you hit a hardened nail or screw. Then they scream and smoke and grind until their teeth are torn off, and you still only have half a hole. With its carbide teeth, the Expert Tough Material barely slows down when it hits metal – it cuts neatly through and keeps on cutting holes, time and again.Made with Bosch Carbide Technology, each tooth is an optimum grade of the hardest metal, laser welded and ground six times for the perfect cutting shape. This makes the Bosch Expert Tough Material Hole Saw ideal for tough jobs and all-round trades work: As well as wood and metal, i…

The bi-metal Hole Saw fits all standard adapters on the market. The bi-metal Hole Saw offers smooth cutting through various materials. The tooth configuration (Vario tooth strip) is ideal for gliding through material to provide smooth cuts. Made of bi-metal HSS (high-speed steel) containing 8% cobalt alloy, this hole saw has less risk of tooth breakage and higher heat resistance for long-lasting cutting. Use this hole saw when cutting through wood, metal and plastics • Smooth Cutting • Bi-metal Hole Saw offers smooth cutting through various materials • Tooth configuration (Vario tooth strip) is ideal for gliding through material to provide smooth cuts • Made of bi-metal …

Bosch 2608594239 HSS-Bi-Metal Progressor Holesaw for Wood and Metal 102mm The Bosch 2608594239 HSS-Bi-Metal Holesaw has a diameter of 102mm and a working length of 44mm. BiM Progressor Hole Saw offers a 2x longer lifetime than its predecessor. It has been redesigned with Bosch Bi-Metal with 8% cobalt alloy for increased durability. Additionally, it has an enhanced progressive tooth strip that enables faster cuts. Use this hole saw when drilling holes in wood, drywall, plastics, metal, non-ferrous metal and stainless steel. It is suitable for use with all corded and cordless drill drivers. Features:
- Redesigned with Bi-Metal with 8% cobalt alloy for increased durability
- BiM Progressor …