Car Jacks

Expert Quality, polyester webbing, 150mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 5000kg for a load at one end (straight configuration) and 10,000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• Two rubber wheel chocks.• Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12º.• Chocks supplied on rope for easy storage and removal from underneath wheels.Rubber wheel chocks weighing 8kg (4kg each) prevent vehicle movement when jacking or parking on an incline. Suitable for heavy commercial vehicles and light aircraft. Chocks supplied on rope for easy storage and removal from underneath wheels. Not intended for use on sloped ground over 12º.• Two rubber wheel chocks. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12º. • Suitable for light aircraft, or vehicles below 30tonne. • Choc…

Expert Quality, polyester webbing, 50mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 1000kg for a load at one end (straight configuration) and 2000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type A design.• Fits over the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type A. Profile Depth 19mm. Size ø137.5mm. Fits saddle ø116-123mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type A. • Profile Depth: 19mm. • Size: ø137.5mm. • Fits saddle ø116-123mm. • Model No. JP06Technical Specification:Nett Weight: 0.29kgJack Pad Size: ø137.5mmStyle: Type AProfile Depth: 19mmTo Fit Saddle Size: ø116-123mmWeight: 0.29kgDimensions: Length: 20mm x Height: 280mmWeight: 0.284KgWarranty: Consumable

• A fully adjustable saddle with forward, backward and side-to-side tilt.• Note: When using these adjustable supports the maximum capacity of the jack and support combination will be limited to the lowest specified capacity in the combination. e.g. 600GA and ADT3 - Maximum capacity is 500kg.Fully adjustable saddle with forward, backward and side-to-side tilt. Suitable for Model No's. 300TR, 300TRQ, 600TR, 600TRQ.• A fully adjustable saddle with forward, backward and side-to-side tilt. • Suitable for Model No's. 300TR, 300TRQ, 600TR, 600TRQ. • Note: When using these adjustable supports the maximum capacity of the jack and support combination will be limited to the lowest specified capacity in the com…

• Features width adjustment from 180-255mm, making it suitable for almost all motorbikes. • Design ensures rim and tyre protection at all times.• Allows easy removal and cleaning of front wheel.• Please note all front paddock stands need to be used in conjunction with a suitable rear stand to ensure bike stability (See Model No. RPS2KD).• Delivered in knock-down form to reduce freight costs, some self-assembly required.Technical SpecificationNett Weight: 3.5kgMinimum/Maximum Width: 180-255mmTechnical Specification:Minimum Width: 180mm Maximum Width: 255mmDimensions: Length: 110mm x Height: 110mmWeight: 4.1KgWarranty: 1 year

• Heavy-duty 7 Tonne short axle stands.• Sturdy welded steel construction for superior safety and strength.• Large crutch for good load distribution.• Supplied with captive pin load support.• Suitable for use with forklifts and vehicles with low suspension.• Sold in pairs.Heavy-duty short axle stands. Sturdy welded steel construction for superior safety and strength. Large crutch for good load distribution. Supplied with captive pin load support. Suitable for use with forklifts and vehicles with low suspension. Sold in pairs.• Min./Max. Working Height: 244/354mm. • Capacity: 14tonne per pair. • Sturdy welded steel construction. • Captive pin load support. • For forklifts and vehicles with low …

Powerful – the pneumatic car jack uses 5 to 10 bar compressed air to effortlessly raise vehicles up to 3000 kg with the aid of air cushions
Fast – the air jack for cars reaches its 40 cm maximum lifting height in just 5 s, so you can get to work right away
Safe – a large base and a support with a diameter of 10 cm provides stability to the air cushion car jack, while an overpressure valve protects against excessive loads
Flexible – the two handles with rubberised ends ensure the pneumatic jack is always in the optimum position
Stable – built with steel and featuring three air cushions, the construction is robust and durable, while an adjustable inner cylinder provides added stability when exten…

Twin-piston, quick lift facility - just six pumps to reach maximum height
Lifting range 100-465mm
Integrated rubber saddle pad prevents damage to underside of vehicle
EVA foam handle to prevent panel damage
Knurled handle for extra grip
Twin safety overload valves
Rear swivelling castors
Manufactured to EN 1494 Specification
Draper 12 months parts and labour warranty