Effects Pedals

The Behringer UO300 Ultra Octaver Pedal gives you that extra cutting edge to your sound by adding up to two additional tones to your guitar. Offering notes that are either one to two octaves lower than the original sound packing in that extra punch. You can also adjust all three tones at any moment with intuitive and individual volume controls for each one which accompanies a switch that offers brilliant bass performance. With a performer friendly LED status light you can tell if the pedal is active wherever you are on stage.

D’Addario XPND Pedal Risers are designed to elevate pedals in those “tough to stomp” places. Mont the risers using the included hook and loop strips and raise any pedal a full inch, making it easy to access. You can align multiple risers across your board as needed, and with built-in-cut-outs for simple cable routing, adding risers is quick and hassle-free. XPND Pedal Risers are built to last and are available in single or double width, to accommodate dual-sized or multiple pedals.
Material: Aluminium
Variant: Large
Colour: Black
Size: L
Made in: Vietnam

The power supply 1 SPOT you can use anywhere in the world without a voltage converter because it automatically converts voltage worldwide. No need to worry about AC hum interfering with your sound either. the 1 SPOT is one of the quietest power sources. It is the 9V DC adapter that only takes up one spot on your power strip. With the ability to handle up to 1700mA, the 1 SPOT can power your entire pedalboard.
Variant: 1 SPOT
Current: 1700 mA
Connector Angle: Straight
Power Supply: 9V;Adapter
Colour: Black
Type: Adapter
Polarity: Center Minus
Plug Type: Barrel
Made in: China
Voltage: 9V
ChargerType: Power Supply
Current (mA): 1700.0…

Custom moulded in the UK to fit the contours of the Headrush Mx5. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Headrush Mx5.
Type: Dust Cover
Made in: United Kingdom
Compatible with: Headrush Mx5

Approved 12V DC/1000mA power supply with negative centre that is compatible with TC Electronic stompbox pedals.
UK/EU Power supply included: No
Current (mA): 1000.0
Made in: China
Power Supply: 240V
ChargerType: Power Supply
Current: 701-1000 mA
Plug Type: Barrel
Polarity: Center Minus
Voltage: 12V
Number of Outputs: 1

Custom moulded in the UK to fit the contours of the Strymon Nightsky & Volante. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Strymon Nightsky & Volante.
Made in: United Kingdom
Compatible with: Strymon Nightsky / Volante
Type: Dust Cover

Instrument Equipment Bag / Black / 0.49 kg

Compact and portable 3-button footswitch pedal for use with several DigiTech products, including The Jimi Hendrix Experience, The JamMan, or Expression Factory. Pedal provides increased functionality and convenient Hands-free control over up/down selection of Models, Mode changes, Loop selection, automatic Start/Stops, and auto record where applicable. It is equipped with durable metal chassis construction, one 1/4" input and 3 m stereo TRS cable.
Battery Operation: No
Colour: Black
Power Supply: Passive
Number of Buttons: 3
Type: Footswitch

The Behringer TU300 Chromatic Tuner is a necessity for any modern performer. Keeping your instrument at the correct tuning is essential to any performer and this makes that job a whole lot easier. Featuring a seven-segment LED indicator you can select between seven different tuning modes and an eleven-point stream meter can ensure the utmost precision at any moment. Whether you are on stage or in the studio this is the perfect companion for you.

The TC Helicon Singles Connect Kit is a cable set for connecting up to four vocal effects pedals together. With minimal cable clutter and simple usage the Singles Connect Kit is an essential audio and power accessory kit for the VoiceTone Single pedals. Including a 12V/1A power supply DC interconnect/daisy-chaining cables and three short XLR cables the Singles Connect Kit opens up a wide range of options for connecting your effects.

Sustain pedal for Casio keyboards, plastic
Original Colour by Producer: Black;Black
Type: Sustain Pedal
Made in: China
Type-A Connector: Jack MONO 6,3 mm Male
Colour: Black
Cable Length: 1,7 m
Compatible with: Universal
Polarity Switch: No

Get louder, get quieter, or get modulated with the outstanding FOOT CONTROLLER FCV100. This versatile pedal works equally well as a volume or modulation pedal – without tying up your hands or slowing down your performance.The FCV100 can accommodate two mono or one stereo instrument via its dual 1,4" Input jacks. By switching into Norm mode, the FCV100 is capable of controlling the volume of two individual instruments. In CV mode the FCV100 can control modulation and volume levels of other musical instruments by connecting Output 2 to the volume or modulation input of the instrument. In CV mode, when Output 2 is in use, Input/Output 1 can still be used for controlling the volume of another …

Pedal Design Foot Pedal

This well-built, real-feel pedal comes with a non-slip rubber plate — essential when performing on hardwood or slip-prone surfaces — and an extended cable (2.2 m) for stacked multi-keyboard setups. It is compatible with half-damper capable keyboards, and it can also serve as a standard pedal switch (for sustain, etc).
Made in: Malaysia
Type: Half Damper;Sustain Pedal
Original Colour by Producer: Black;Black
Type-A Connector: TRS 6,3 mm Jack
Colour: Black
Polarity Switch: No
Cable Length: 2,2 m
Compatible with: Universal

A case style gig bag, ideally suited for the Pedal Baby 100. This tough vinyl gig bag is zippered on three sides and comes with a shoulder strap. There’s a separate space for pedals and cables along with a zipped pocket on top so you can fit your entire rig in a case smaller than a laptop bag. Padding has been added to the inside to provide extra support for your valuable gear.
Original Colour by Producer: Black;Black
Made in: United Kingdom
Type: Soft Case
Colour: Black

Digital multi-effects pedal comparable to state-of-the-art studio processors that features 24-bit/40 kHz high-resolution stereo effects including Chorus, Flanger, Phaser, Delay, Tremolo and Pitch Shifter. It also provides dedicated Level control plus 2 additional parameter controls for adjustment of delay time, flanger rate etc., a status LED indicator for effect on/off and battery check, and a first-class electronic on/off switch that maintains incredible signal integrity in bypass mode. Pedal can be powered by either a 9 V battery or DC power supply (not included). Dimensions: 54 x 70 x 122 mm. Weight: ca 330 g.
UK/EU Power supply included: No
Battery Type: 9V
Power Supply: 9V DC ( - )
Battery …

Simple sustain plastic pedal, suitable for all keyboards with standard sustain polarity. Cable length: 160cm.
Type: Sustain Pedal
Colour: Black
Polarity Switch: No
Cable Length: 1,6 m
Type-A Connector: Jack MONO 6,3 mm Male
Original Colour by Producer: Black;Black
Made in: China

The Eden Astroflange Bass Flanger Pedal is a bass-optimised flanger with detailed controls so you can craft your ultimate flanged tones. Specially designed for bass the dynamic response of this versatile pedal has been tailored for bass frequencies to deliver low-end shimmer. Sporting a simple yet adaptable four-knob layout its quick and easy to dial in a range of fantastic flanged sounds. The intuitive nature of these controls allows you to really dive into fine-tuning however. Velocity is your standard speed/rate control while Altitude adjusts the predominant frequencies affected by the flanging effect. The Low Cut offers even more depth by setting how much low-end is affected by the modulation.…

Lacerate is a mini pedal with a huge boost ! The unbelievably simple user-interface comes from our complex Dual FET Circuit Design, but don't worry about what's under the hood. Just enjoy the 1 Simple Control-Knob, 2 Boost Options, and 2 Bypass Modes. In the Clean mode, Lacerate only boosts the signal, increasing the volume without any sound colorization. If you want fat , harmonically rich boost tone, just hold down the foot-switch (1 second) to engage the 2nd stage which adds your overdrive tone. Most boost pedals will only yield about + 20dB maximum, but Lacerate`s Crank mode gives you a whopping + 35dB . Lacerate has an integrated voltage-doubler which automatically changes 9V to 18V …

Shopping for a British distortion pedal? Try the NU-X Brownie! The Classical British rock tones of the 1970’s, packed into one little box. How it works? By using a hybrid of circuits, we created truly unique pre-amp and power tube distortion characteristics. You’ll be amazed to hear the warm, organic tone that’s reproduced. Brownie has a specially designed BJT input stage causing it to “break-up” when the preamp tube starts to distort. It also has an asymmetrical clipping circuit letting you simulate some of the characteristics of an actual tube amplifier. It also keeps the bottom-end tight by processing bass frequencies which can get muddy when distorted. NU-X Brownie uses a low-pass t…

Reissue series drive pedal for guitar or bass. The XTC OD simulates the red channel of a highly regarded boutique tube amplifier, which produces a thick and harmonically rich distortion effect for classic rock styles. All analog circuitry ensures a pure signal path and a "T" tone control enables adjustment of high frequency content as required. A full range of classic rock tones on tap from a single pedal.. Features: Pure analogue amplifier simulation True bypass hardware switching Volume, Gain & Tone controls Specifications: Battery: 9V PP3 (supplied) Power supply: Optional 9Vdc 300mA regulated (not supplied) Controls: V (volume), G (gain), T (tone) & foot switch Input impedance: 1M Ohms …

Genuine Tube-like sound that makes it more than your average Screamer pedal! If you’re not playing through a real tube amp, cranked for overdrive, it’s difficult to get genuine tube overdrive sound. Using a FET Transistor System, which already has overdrive and distortion capabilities is a better approach to maintain the genuine sound you get from an actual analog tube amp. A FET allows you to bring out the harmonic attributes, and break-up the distortion into a finer grit, the way a real tube does. Now, your leads will sing richer and longer, and your rhythm will be more open and expressive than ever before. It all culminates into an overdrive that is superbly dynamic, with crisp precise clar…

Reissue series high gain distortion pedal for guitar or bass. The Recto Distortion simulates a hard driven US voiced tube amplifier with a tight bass response for heavy metal and grunge guitar styles. All analogue circuitry ensures a pure signal path and 2-band EQ helps to tailor the frequency response as needed. Powerful tones for heavy riff and barre chord driven rock. Features: Pure analog amplifier simulation True bypass hardware switching Gain, Master & 2-band EQ controls Specifications: Battery: 9V PP3 (supplied) Power supply: Optional 9Vdc 300mA regulated (not supplied) Controls: Gain, Master, Bass, Treble & foot switch Input impedance: 1M Ohms Output impedance: 10k Ohms Dimensions: …

Reissue series drive pedal for guitar or bass. The Steel Singer Drive simulates a high end boutique tube amplifier, delivering a transparent mild to medium driven gain, much revered by many famous guitar players. All analog circuitry ensures a pure signal path and a filter control provides a single intuitive EQ adjustment. Subtle gain to smoothly overdriven tones for blues, pop and rock styles. Features: Pure analogue amplifier simulation True bypass hardware switching Volume, Gain & Filter controls Specifications: Battery: 9V PP3 (supplied) Power supply: Optional 9Vdc 300mA regulated (not supplied) Controls: Volume, Gain, Filter & foot switch Input impedance: 1M Ohms Output impedance: 10k …