Car Jacks

• Weight-for-weight, this strap is three to five times stronger than chain and has the advantage that overload can be detected early by the fraying of the strap.• Manufactured from 100% high strength polyester with reinforced lifting eyes.• Colour-coded according to European standards for identifying capacity.• Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (straight configuration).Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded accordin…

Expert Quality, for semi - permanent attachment to steel RSJ's to act as lifting point for chain blocks, hoists and lifting tackle. Can also be used for the lifting and transfer of steel beams and as a pulling clamp. Test certificate included. Carton packed.

Flat arm with spring loaded roller bearings for use with SJBEX3000S and SJBEX4000S Jacking Beams. When unloaded these arms support the weight of the beam, allowing for it to run smoothly along the pit edge. In position, and when the beam is under load, the bearings retract, to leave the flat of the arm, to stabilise the lift.Features & Benefits:• Flat arm with spring loaded roller bearings for use with SJBEX3000S and SJBEX4000S Jacking Beams.• When unloaded these arms support the weight of the beam, allowing for it to run smoothly along the pit edge.• In position, and when the beam is under load, the bearings retract to leave the flat of the arm to stabilise the lift.• Model No. SJBEX.A01Speci…

• Replacement hydraulic ram for SC10.V3 engine crane.Replacement hydraulic ram for SC10.V3 engine crane.• Replacement hydraulic ram for SC10.V3 engine crane. • Model No. SC10.V3-ETechnical Specification:Nett Weight: 9.6kgRam Capacity: 3000kgRam Diameter: 27.88mmRam Travel: 515mmPump Type: Single SpeedRam Pin Hole Diameter: 16.5mmClevis Pin Hole Diameter: 16.5mmMounting Point Distance (Min.): 635mmOverall Length (Min.): 670mmBase Mount Type: Double ClevisWeight: 9.612KgWarranty: Consumable

Expert Quality, ideal for the workshop or factory use. The chain hoist has a triple spur geared shaft and pinion with load braking and double pawls. The compact gear housing allows use in areas of limited clearance. High quality welded chain with safety latches on the load hooks.

• Fitted with overload valve. • Base and reservoir machine welded for increased strength and eliminates leakage. • Supplied with 2-piece handle.• 3 Year guarantee*.Technical SpecificationCapacity: 8 TonneHydraulic Lift: 145mmMaximum Height: 447mmMinimum Height: 222mmNett Weight: 5.00kgScrew Extension: 80mmTechnical Specification:Capacity: 8 Tonne Hydraulic Lift: 145mm Maximum Height: 447mmDimensions: Length: 132mm x Height: 230mmWeight: 5.214KgWarranty: 3 years

• Optional Bobbin Support for Model No. RPS2.• Designed to give extra support and added stability once rear axle has been located and raised.• Yellow phosphate finish for added corrosion resistance.Optional Bobbin Support for Model No. RPS2. Designed to give extra support and added stability once rear axle has been located and raised. Yellow phosphate finish for added corrosion resistance.• Optional Bobbin Support for Model No. RPS2. • Designed to give extra support and added stability once rear axle has been located and raised. • Yellow phosphate finish for added corrosion resistance. • Model No. RPS1BSTechnical Specification:Length: 105mmNett Weight: 0.34kgQuantity: 2Dimensions: Length: 115mm …

Expert Quality, polyester webbing, 90mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 3000kg for a load at one end (straight configuration) and 6000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). All duplex slings are manufactured to the European lifting sling standard, giving a 7:1 safety factor. Each sling is individually numbered for traceability and is supplied with a certificate of conformity.Working Load Limit: 2 tonne x 4 metre

• Suitable for lower capacity single and twin cylinder engines.• Supports can rotate for accessibility to all parts of the engine.• Useful integral utility/drip tray.• Capacity: 30kg.Suitable for small capacity single and twin cylinder engines (maximum weight 30kg) and includes a utility/drip tray. Supports can rotate for accessibility to all parts of the engine.• Suitable for lower capacity single and twin cylinder engines. • Supports can rotate for accessibility to all parts of the engine. • Useful integral utility/drip tray. • Capacity: 30kg. • Model No. MES01Technical Specification:Capacity: 30kgEngine Support Span: 200-370mmHeight: 375mmLength: 535mmNett Weight: 7.89kgWidth: 320mmDimensions: L…

• Heavy-duty steel frame suitable for supporting partly dismantled or badly damaged vehicles.• Enables easy movement around bodyshop.• The supports are interchangeable between V-crutches and sill clamps.• Supports and clamps adjustable for height and overall width.• Fitted with four ø125mm nylon castors, two of which lock.Heavy-duty steel frame suitable for supporting partly dismantled or badly damaged vehicles. Enables easy movement around bodyshop. The supports are interchangeable between V-crutches and sill clamps. Supports and clamps adjustable for height and overall width. Fitted with four ø125mm nylon castors, two of which lock.• Heavy-duty steel frame suitable for supporting p…