Car Jacks

Package includes: Model Number - Description TD284SD - Ratchet Tie Down 25mm x 4m Polyester Webbing with S-Hooks 800kg Breaking Strain TDMCHB - Tie Down - Motorcycle Handlebar TDMCRW - Tie Down - Motorcycle Rear Wheel WCR02 - Tie Down - Motorcycle Roll-in Wheel Clamp - Bolt Down Features & Benefits: Package includes: • Model Number - Description • TD284SD - 25mm x 4m Polyester Webbing Ratchet Tie Down with S-Hooks 800kg Breaking Strength • TDMCHB - Tie Down - Motorcycle Handlebar • TDMCRW - Tie Down - Motorcycle Rear Wheel • WCR02 - Tie Down - Motorcycle Roll-in Wheel Clamp - Bolt Down • Model No. MTC01 Specifications: Model No MTC01 Brand: Sealey

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…

Large rubber pad designed to work trolley jacks for use on standard chassis vehicles. Designed to avert damage to the underside of a vehicle. Made from durable and robust rubber. The slotted feature enables the pad to be used on car sills whilst stopping the sills from collapsing under pressure. For use with a saddle diameter of over 65mm.

This engine support beam is designed to position the engine when replacing the engine mounts. It is also suitable for aiding the removal of transmission components and gearboxes. Compatible with most cars and light commercial vehicles. Adjustable outer extension clamps with rubber feet to prevent damage to the paintwork. Supplied with one chain. Contents: 1 x Chain Specifications: Capacity: 300kg Min. width: 1,015mm Max. width: 1,380mm Adjustable screw height: 0-305mm Overall beam length: 990mm Chain quantity: 1 Weight: 15kg

Replacement hydraulic ram for PH30 engine crane. Features & Benefits: • Replacement hydraulic ram for PH30 engine crane. • Model No. PH30.01 Specifications: Model No PH30.01 Brand: Sealey Nett Weight: 14.7kg Ram Capacity: 1200kg Ram Diameter: 38.05mm Ram Travel: 494mm Pump Type: Single Speed Ram Pin Hole Diameter: 22.2mm Clevis Pin Hole Diameter: 21.4mm Mounting Point Distance (Min): 650mm Overall Length (Min): 690mm Base mount Type: Double Clevis

Expert Quality, ideal for the workshop or factory use. The chain hoist has a triple spur geared shaft and pinion with load braking and double pawls. The compact gear housing allows use in areas of limited clearance. High quality welded chain with safety latches on the load hooks.Tested and Certified to BS EN 13157Additional Information:Safe Working Load: 5000kgTest Load: 7500kgLift Height: 3mHook Aperture: 46mmHoist Weight: 39kg

Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Depth 6.4mm. Size 106.5mm. Fits saddle 99-106mm.

Expert Quality, polyester webbing, 60mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 2000kg for a load at one end (straight configuration) and 4000kg for a load between the loop eyes ('U' configuration). Manufactured to BS EN1492 Contents: 1 x Wide Load Sling, 5m x 60mm, 2 Tonne

Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). All duplex slings are manufactured to the European lifting sling standard, giving a 7:1 safety factor. Each sling is individually numbered for traceability and is supplied with a certificate of conformity.Working Load Limit: 3 tonne x 4 metre

Fitted with overload valve. Base and reservoir machine welded for increased strength and reduced chance of leakage. Threaded pump assembly allows for easy disassembly and maintenance. Supplied with 4-piece operating handle. Fitted with carrying handle. Service kit readily available. Features & Benefits: • Min./Max. Height: 125/215mm, allowing low entry. • Telescopic 2-stage ram for higher maximum lift. • Compact closed height. • Cast base with threaded components. • Supplied with 4-piece operating handle. • Carrying handle. • Model No. BJ10LE Specifications: Model No BJ10LE Brand: Sealey Capacity: 10 Tonne Hydraulic Lift: 90mm Maximum Height: 215mm Minimum Height: 125mm Nett Weight: 7.70kg…