Car Jacks

• Two rubber wheel chocks.• Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12º.• Chocks supplied on rope for easy storage and removal from underne more→ath wheels.Rubber wheel chocks weighing 8kg (4kg each) prevent vehicle movement when jacking or parking on an incline. Suitable for heavy commercial vehicles and light aircraft. Chocks supplied on rope for easy storage and removal from underneath wheels. Not intended for use on sloped ground over 12º.• Two rubber wheel chocks. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12º. • Suitable for light aircraft, or vehicles below 30tonne. • Choc…

Manufactured from high quality translucent virgin HDPE plastic. Suitable for storing and dispensing water. Supplied with integral 360° swivelling tap and easy flow screw vent. Sold loose.

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. D more→esign Type B. Profile Height 6.5mm. Size ø94mm. Fits saddle ø93-96mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Height: 6.5mm. • Size: ø94mm. • Fits saddle ø93-96mm. • Model No. JP17Technical Specification:Nett Weight: 0.050kgJack Pad Size: ø94mmStyle: Type BProfile Depth: 6.5mmTo Fit Saddle Size: ø93-96mmWeight: 0.050kgDimensions: Length: 20mm x Height: 165mmWeight: 0.052KgWarranty: Consumable

• Heavy-duty trailer jack with swivel mounting.• Suitable for handling trailers with heavy nose weight.• Integral swivel weld-on mounting.• Min./Max. Height: 230/480mm.Heavy-duty trailer jack with swi more→vel mounting. Suitable for handling trailers with heavy nose weight. Integral swivel weld-on mounting.• Heavy-duty trailer jack with swivel mounting. • Suitable for handling trailers with heavy nose weight. • Integral swivel mounting. • Min./Max. Height: 230/480mm • Model No. TB373Technical Specification:Capacity: 900kgMaximum Height: 480mmMinimum Height: 230mmNett Weight: 4.62kgDimensions: Length: 253mm x Height: 125mmWeight: 5.136KgWarranty: 1 year

Expert Quality, polyester webbing, 120mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 4000kg for a load at one e more→nd (straight configuration) and 8000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

Designed for the jacking points to protect and prevent damage to side skirts and battery. Made from high quality rubber, providing a sturdy and durable point of contact. Features a rubber O-ring on th more→e spigot, creating a secure fit to the vehicle. Features & Benefits: • Designed for the jacking points to protect and prevent damage to side skirts and battery. • Made from high quality rubber, providing a sturdy and durable point of contact. • Features a rubber O-ring on the spigot, creating a secure fit to the vehicle. • Model No. JPT4 Specifications: Model No JPT4 Application(s): Suitable for Models S and X Brand: Sealey Nett Weight: 0.72kg

Designed to support and accurately position engines during maintenance operations such as replacing anti-vibration mountings and certain body panels. Also used as an aid for the removal of gearboxes a more→nd transmissions. Beams supported on rubber feet and fine adjustment control is obtained by using screw/hook mechanisms. This model has the additional advantage of a 360 adjustable rotating cross beam to enable a greater range of support options when in use.

• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle.• The clamp may also be used for lifting and transfer of steel beams and more→as a pulling clamp.• Low profile afforded by integral pivot/lifting point.Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. Low profile afforded by integral pivot/lifting point.• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. • The clamp may also be us…