Car Jacks

The B-G Racing Formula Small Quick Lift Jack is suitable for single seaters and formula models which have ultra low entries in order to lift them. These latest versions now feature a safety lock for the handle.The Quick lifts are designed, as the name suggests, to slip easily underneath the application and lift to a fixed height with one easy action. These jacks are constructed from mild steel and are finished to a great quality look and feel, with a quality action and durability. The Quick lift jacks are power coated in a shade of silver/grey for durability and corrosion resistance. The ends of the hande are finished in yellow for ease of visibilityTwo sizes are available:Short Length: 790mm Width: …

Spare Parts for Kennedy Bottle Jacks

VEVOR Floor Jack, 1.5 Ton Low Profile Floor Jack, Aluminum And Steel Racing Floor Jack With Dual Pistons Quick Lift Pump, Floor Jack Lifting Range 80 mm-365 mmPowerful CapacityBuilt to LastEasy to OperateNo More Damage to VehiclesReliable SealingSmooth-RollingConvenient ArmrestsHandle Length: 37-2/5"/950 mm,Product Size (L x W x H): 23x9.8x5.4(inch)/585x250x137(mm),Lift Weight Capacity: 3300 LBS/1.5 Tons,Model: QJD-LTD015A-00,Product Weight: 34.5 lb/15.65 kg,Load Bearing Method: Hydraulic Dual Pump,Maximum Height: 14-10/27"/365 mm,Material: Aluminum + Steel,Tray Diameter: Φ3-9/10"/99 mm,Minimum Height: 3-3/20"/80 mm

Trolley Jack / Max Load 2 t

High quality, ultra-strong bottle jack - designed for effortless lifting. Can be used vertically or angled to 3 degrees from a vertical position. Features and Benefits Features a wide, rugged base that provides excellent stability and strength Provides peace of mind - all critical stress points on the jacks are reinforced for added durability and dependability Cast iron bases with a steel cylinder housing and an adjusting notched saddle Fitted with an overload protection valve Typical Applications Suitable for lifting or positioning vehicles, machinery, houses and/or other building structures but after lifting, loads must be immediately supported by jack stands Standards Met Complies with the …

Designed for raising and lowering cars and vehicles in a workshop or garage environment. Lightweight and portable with a handy blow-moulded carry case for storage, this kit will enable you to easily replace parts, repair or perform maintenance on your vehicle safely and efficiently. Kit Comprises: 1 x 2 Tonne Hydraulic jack trolley with handle 2 x Wheel Chocks 2 x Axle Stands 1 x Instruction Manual

The JCB-TH32506S is a robust, low-profile and double-pump hydraulic off-road SUV trolley jack designed to offer a maximum lifting capacity of up to 2.5 tonnes in weight.Courtesy of its aluminium construction, the JCB-TH32506S is capable of lifting SUVs, cars, light commercial vehicles and any other vehicle which requires high ground clearance up to 525mm in height in all conditions.In addition to its default 525mm maximum height clearance, the JCB-TH32506S comes equipped with 2x saddle extensions, which can increase the trolley jack’s maximum ground clearance up to 677mm.The JCB-TH32506S’ chassis utilises a low-profile design, which allows the trolley jack to reach lower clearances, particularly usef…

Note: Image is for illustrative purposes only and may differ from the actual product

VEVOR Hydraulic Long Ram Jack, 8 Tons/17363 lbs Capacity, with Single Piston Pump and Clevis Base, Manual Cherry Picker with Handle, for Garage/Shop Cranes, Engine Lift Hoist, Red8-Ton/17636 lbs Load Capacity26 "-45.7" Lifting RangeHydraulic Steel CylinderSingle Piston Pump & Clevis BaseHigh-grade Steel StructureResidential and Commercial UseStoke: 19.7 in/50 cm,Pinhole Diameter: 0.7 in/1.7 cm,Product Diameter: 3.1 in/8 cm,Piston Rod Diameter: 1.2 in/3 cm,Lifting Capacity: 8 Tons/17363 lbs,Model: VV-CGQJD-HODJ-8T,Min. Lift Height: 26 in/66 cm,Max. Lift Height: 45.7 in/116 cm,Power: Hydraulic,Weight: 20.5 lb/9.3 kg

0.22 kg

Note: Image is for illustrative purposes only and may differ from the actual product

The WINNTEC® from SIP 20 TON Low-Profile Air Bottle Jack offers easier and safer lifting of vehicles both large and heavy, by providing powerful air-assisted horizontal and vertical performance, and lifting up to 260mm along with a versatile 80mm screw extension. Suitable for automotive and commercial vehicles in garages and workshops. KEY FEATURES 148mm to 260mm lifting height range 45mm screw extension for improved versatility Low-profile design ideal for performance vehicles Designed for horizontal and vertical operation Aluminium air motor for heavy-duty performance WINNTEC® from SIP 3-Year Warranty

All steel construction compact heavy duty unit with lifting range of 85mm to 330mm. Low profile suitable for low access vehicles. Portable and easy to operate with swivel castors. Built in pump overload prevents over loading for safe operation with hydraulic bypass system to stop ram over travel. Product size: 545 x 215 x 147mm, weight 11kg, packed in colour box.