Car Jacks

Zinc Plated Side Winding Parking/Lifting Jack with Round Fixing Tube supplied with Inner Tube for welding. Height Retracted 405mm, Height Extended 655mm, Box Size 60mm, Round Base Diameter 150mm, Load Capacity 2000kg

Zinc Plated Side Winding Parking/Lifting Jack with Round Fixing Tube supplied with Inner Tube for welding. Height Retracted 530mm, Height Extended 905mm, Box Size 60mm, Square Base Diameter 200mm, Load Capacity 3000kg

[Capacity]Aluminum and steel floor jack can lift up to 3 tons 6600 lbs with a lifting range height of 3-15/16" min to 18-5/16" max.Dimensions:28.3" L x 13.7"W x 7.8"H.Floor jack is used for most Sedans,SUV,MPV,travel trailer,station wagon,mini bus.Package contains rubber saddle and two piece handle [Low Profile]The high performance floor jack with low profile design of 3-15/16" min.lifting height allow you to get underneath a low vehicle,suitable for low ground clearance vehicle [Quick lifting]Heavy duty jack with dual piston enable you to easily pump the jack to the desired height.Large rubber saddle also help protect your vehicle [Durable Material and Easy Operation]Floor jack

This professional 2 tonne long reach jack is a must for the workshop. Its large 130mm saddle and foot operated lifting pedal makes jacking point location quick and easy and the handle mounted twist release valve ensures controlled and predictable lowering.

Note: Image is for illustrative purposes only and may differ from the actual product

Fitted with safety overload valve and manufactured in the EU. All steel, one-piece base, reservoir and pump cylinder design gives added strength. Fully serviceable ram piston with extension screw. All models supplied with 90 rotating pump and telescopic pump handle. Fitted with moulded carry handle incorporating storage for the pump handle. Service kit readily available.

Spacious - with total dimensions of 60 x 90 x 202 cm. Two shelves. A storage grille and pull-out storage rails with tension straps Load capacity - supports a total load up to 220 kg Mobile – thanks to four PU steering wheels with two brakes and modular construction Efficient - creates more order and saves paths in any body workshop

Note: Image is for illustrative purposes only and may differ from the actual product

Telescopic hydraulic ram allows a reduced closed height without compromising maximum lift height. Made in the EU and fitted with safety overload valve. One-piece steel base reservoir and pump cylinder design gives added strength. Supplied with zinc coated handle.5 Tonne Bottle Jack with Telescopic Ram• Min./Max. Height: 215/515mm.• Telescopic hydraulic ram allows a reduced closed height without compromising maximum lift height.• Made in the EU and fitted with safety overload valve.• One-piece steel base reservoir and pump cylinder design gives added strength.• Supplied with zinc coated handle.• 3 Year Guarantee*.• Model No. PTBJ5Model No: PTBJ5:Brand: Premier:Capacity: 5

The Winntec From Sip 2 Ton Low-Profile Jack Has An Integrated Jack Stand For Versatility And A Low-Profile Design For Low Vehicles Plus Controlled Descent And Auto Lock System For Optimal Safety. • 2 Ton Maximum Weight Capacity • 75Mm To 500Mm Lifting Height Range • Low-Profile Design For Lower Vehicle Clearances • Turbo-Lift System Raises The Jack Contact Saddle To The Vehicle Lifting Surface In One Swift Motion • Integrated Jack Stand For Added User Versatility • Comfortable Rubber Grip With Extra-Long Handle • Auto Lock System At 390Mm And Controlled Descent For Safety; Plus Hold-To-Run Control • Hard Chromed Main Ram And Dual Pump Pistons • 2-Speed Lowering; Fast And

This robust engine crane has a maximum capacity of 1 Tonne. The single piston hydraulic pump ensures rapid lifting of an engine out of its bay with little effort. There are four pre-set jib positions, with a maximum capacity of 250kg when the jib is fully extended. The outrigger legs can be folded to optimise storage workshop space or for easy transportation. There are six robust castor wheels to allow safe and easy mobility. For safety they are twin overload valves to prevent exceeding capacity. This engine crane is compatible with a wide range of load slings and levellers. Manufactured to EN1494 Specification Features & Benefits: • Three pre-set jib positions for lifting • Single …

This robust engine crane has a maximum capacity of 1 Tonne. The single piston hydraulic pump ensures rapid lifting of an engine out of its bay with little effort. There are four pre-set jib positions, with a maximum capacity of 250kg when the jib is fully extended. The outrigger legs can be folded to optimise storage workshop space or for easy transportation. There are six robust castor wheels to allow safe and easy mobility. For safety they are twin overload valves to prevent exceeding capacity. This engine crane is compatible with a wide range of load slings and levellers. Manufactured to EN1494 Specification Features & Benefits: • Three pre-set jib positions for lifting • Single …

Gato Hidráulico D/Aluminio 1,5T Hydraulic aluminum jack for lifting vehicles Durable construction for safety and reliability Lightweight and portable design Provides efficient lifting for automotive maintenance

Note: Image is for illustrative purposes only and may differ from the actual product

A low entry height Trolley Jack. Heavy duty fixed direction castors, swivel castors and inside wheel ensure excellent manoeuvrability and easy positioning under the vehicle prior to lifting. The foot pedal is to rapidly raise and lower the load arm and the vehicle. The long reach pump handle has a comfort rubber grip. Includes a practical tray for carrying tools and a rubber pad for the saddle. For use on a firm level surfaces. DO NOT work under the raised vehicle until another means of support, such as axle stands are in place. Dimensions T510L: 1010 x 365 x 135mm T525L: 1150 x 350 x 180mm