Car Jacks

• Fitted with overload valve. • Base and reservoir machine welded for increased strength and eliminates leakage. • Supplied with 2-piece handle.• 3 Year guarantee*.Technical SpecificationCapacity: 10 TonneHydraulic Lift: 150mmMaximum Height: 461mmMinimum Height: 231mmNett Weight: 5.9kgScrew Extension: 80mmTechnical Specification:Capacity: 10 Tonne Hydraulic Lift: 150mm Maximum Height: 461mm Minimum Height: 231mmDimensions: Length: 133mm x Height: 243mmWeight: 6.02KgWarranty: 3 years

Expert Quality, polyester webbing, 120mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 4000kg for a load at one end (straight configuration) and 8000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type C design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type C. Profile Depth 22mm. Size ø99mm. Fits Saddle ø96.5-99mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type C. • Profile Depth: 20mm. • Size: ø99.5mm. • Fits saddle ø98-103mm. • Model No. JP19Technical Specification:Nett Weight: 0.135kgJack Pad Size: ø99.5mmStyle: Type CProfile Depth: 20mmTo Fit Saddle Size: ø98-103mmWeight: 0.135kgDimensions: Length: 20mm x Height: 165mmWeight: 0.138KgWarranty: Consumable

Expert Quality, for semi - permanent attachment to steel RSJ's to act as lifting point for chain blocks, hoists and lifting tackle. Can also be used for the lifting and transfer of steel beams and as a pulling clamp. Test certificate included. Carton packed.

Perfect for garage use or for the home motor enthusiast, these durably constructed car ramps can be used together to lift vehicles of 2000kg or less to provide access for maintenance purposes. They can also be used to gain the clearance needed to insert a bottle jack. The solid frames of the car ramps are fitted with rungs to prevent slippage of the wheel after the car has been raised, & an extended rear face allows the ramps to be stood upright for convenient, space saving storage. For ease of use, and especially when working with low ground clearance vehicles like sports cars and custom builds, this set is also supplied with a matching pair of removable car ramp extensions. These fit onto …

• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle.• The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp.• Low profile afforded by integral pivot/lifting point.Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. Low profile afforded by integral pivot/lifting point.• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. • The clamp may also be us…

• Freestanding wheel storage trolley for all types of car wheels.• Stores wheels with rims up to 225mm.• Rack has four locking castors for easy manoeuvring.• Eliminates tyre distortion due to loss of tyre pressure.• Easy to assemble.• Supplied with rim protecting supports.• Overall Size (W x D x H): 460 x 460 x 1160mm.• Maximum Weight Capacity: 100kg (25kg per Level).Completely freestanding wheel storage trolley for all types of wheels with rim size up to ø225mm. Easy to assemble. The rack has four locking castors for easy manoeuvring around the garage. Eliminates tyre distortion due to loss of tyre pressure. Supplied with rim protecting supports.• Freestanding wheel storage trolley for all ty…

Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are softer than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 2 tonne x 2 metre

• Weight-for-weight, this strap is three to five times stronger than chain and has the advantage that overload can be detected early by the fraying of the strap.• Manufactured from 100% high strength polyester with reinforced lifting eyes.• Colour-coded according to European standards for identifying capacity.• Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (straight configuration).Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded accordin…

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type C design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type C. Profile Depth 22.7mm. Size ø122.7mm. Fits saddle ø122-126mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type C. • Profile Depth: 22.7mm. • Size: ø122.7mm. • Fits saddle ø122-126mm. • Model No. JP05Technical Specification:Nett Weight: 0.19kgJack Pad Size: ø122.7mmStyle: Type CProfile Depth: 22.7mmTo Fit Saddle Size: ø122-126mmWeight: 0.19kgDimensions: Length: 30mm x Height: 190mmWeight: 0.188KgWarranty: Consumable…