Car Jacks

This trolley jack features an extra-fast single lifting pump to ensure it reaches full height in just 2.5 strokes. It has a low profile design making it ideal for vehicles with a reduced clearance height, enabling a lifting range from 78-510mm. There is an integrated rubber saddle pad to prevent damage to the underside of the vehicle when in operation. Fitted with hardwearing nylon wheels with rear swiveling castors, for quiet and smooth operation. These wheels also prevent damage to garage floors. There is a safety valve to prevent the jack from overloading. Manufactured to EN1494 Specification Features & Benefits: • 78-510mm lifting range • Single piston pump for a fast lift, …

Heavy-duty high level stand to safely support vehicles when wheel free operations are being carried out. Independently UK load tested. Supplied with three interchangeable crutches for even load support. Heavy gauge steel frame and welded construction give superior strength and safety. Features captive, spring assisted, multi-position pin load support and retracting castors for easy manoeuvrability. Ideal for commercial vehicles. Sold as singles, but MUST be used in pairs, or multiples of.

Ratchet type axle stands with cast iron support posts. Angled teeth in post prevent accidental release of load - the more weight applied, the tighter the post is locked. Sold in pairs. Features & Benefits: • Min./Max. Working Height: 285/420mm. • Capacity: 6 Tonne per pair. • Ratchet type with cast iron support posts. • Tough steel-plate welded bases. • Sold in pairs. • Model No. VS2003

Expert Quality, enables easy changing or moving of large wheels with deep tread tyres used on tractors or HGVs. Fitted with six adjustable and lockable rollers (3 each side) allowing for easy turning of large wheels. The jacking handle and hydraulic foot pedal enables safe single person operation. Capable of carrying 1500kg wheels and lifting them between 0-770mm. Fitted with four heavy duty castors for improved stability and easy manoeuvrability. Designed for use on agricultural and commercial wheels and tyres. Features & Benefits: • Expert Quality • Enables easy changing or moving of large wheels • Fitted with six adjustable and lockable rollers (3 each side) • Jacking …

Saves floor/cabinet space by enabling axle stands to be mounted securely to a wall. Axle stand is held firm horizontally by hooking onto cross brace, without the risk of falling. Supplied with wall mounting fasteners. Suitable for Sealey axle stands AS6, AS5000, AAS5000 and VS2006 ranges as well as most other brands of axle stand. Features & Benefits: • Saves floor/cabinet space by enabling axle stands to be mounted securely to a wall. • Suitable for Sealey axle stands AS6, AS5000, AAS5000 and VS2006 ranges as well as most other brands of axle stand. • Axle stand is held firm horizontally by hooking onto cross brace, without the risk of falling. • Supplied with wall mounting fasteners. • Model…

Fitted with safety overload valve and manufactured in the EU. All steel, one-piece base, reservoir and pump cylinder design gives added strength. Fully serviceable ram piston with extension screw. All models supplied with 90 rotating pump and telescopic pump handle. Fitted with moulded carry handle incorporating storage for the pump handle. Service kit readily available.

Suitable for use with our lever hoists or chain blocks. Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer. Features & Benefits: • Suitable for use with our lever hoists or chain blocks. • Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. • Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer. • Model No. PT500 Specifications: Model No PT500 Brand: Sealey Nett Weight: 7kg Capacity: 500kg Test Load: 750kg Track Width Adjustable Range: 64-140mm Minimum Curve Radius: 800mm A: 212mm B: 115mm C: 115mm…

Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). All duplex slings are manufactured to the European lifting sling standard, giving a 7:1 safety factor. Each sling is individually numbered for traceability and is supplied with a certificate of conformity.Working Load Limit: 3 tonne x 6 metre

Designed to prevent damage to the underside of the vehicle's jacking point. Design Type A. Profile Depth 27mm. Size 118.5mm Square. Fits saddle 100-106mm.

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…