Car Jacks

• Compact automotive wheel chocks for use during emergency wheel change.• To be used on a flat surface only.• Fold flat for easy storage in glove box or door pocket.Compact automotive wheel chocks for more→use during emergency wheel change. To be used on a flat surface only. Fold flat for easy storage in glove box or door pocket.• Compact automotive wheel chocks for use during emergency wheel change. • To be used on a flat surface only. • Fold flat for easy storage in glove box or door pocket. • Folded (W x D x H): 83 x 167 x 28mm (x2). Open: 83 x 167 x 133mm (x2). • Model No. WCF01Technical Specification:Applications: Suitable for cars only, below 2tonne, only on level surface, service purposesDimensio…

• Strong tubular frame supplied with a range of pins to fit the most common headstock sizes.• Once in place, access to all mechanical components at the front of the bike is made easy.• Stand folds dow more→n for compact storage when not in use.Strong tubular frame supplied with a range of pins to fit the most common headstock sizes. Once in place, access to all mechanical components at the front of the bike is made easy. Stand folds down for compact storage when not in use. Supplied with width and angle adjustable rubber support pads to quickly and easily use as rear support stand.• Strong tubular frame supplied with a range of pins to fit the most common headstock sizes. • Once in place, access to…

• Farm jack mount for use on 4x4 external spare wheel mount.• Designed for transporting farm jacks when going off-road.• Adjustable base makes it suitable for most vehicles with an externally mounted more→spare wheel.Farm jack mount for use on 4x4 external spare wheel mount. Designed for transporting farm jacks when going off-road. Adjustable base makes it suitable for most vehicles with an externally mounted spare wheel.• Farm jack mount for use on 4x4 external spare wheel mount. • Designed for transporting farm jacks when going off-road. • Adjustable base makes it suitable for most vehicles with an externally mounted spare wheel. • Minimum/Maximum Depth: 120/175mm. • Model No. FJWMBTechnical Specification:Ne…

• Weight-for-weight, this strap is three to five times stronger than chain and has the advantage that overload can be detected early by the fraying of the strap.• Manufactured from 100% high strength more→polyester with reinforced lifting eyes.• Colour-coded according to European standards for identifying capacity.• Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (straight configuration).Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded accordin…

Textured rubber provides high amount of grip while remaining soft, to prevent damage to the car underbody. Slot in the support block allows the car to be lifted by the sill. Manufactured from zinc pla more→ted steel and rubber, providing a sturdy and durable point of contact. Suitable for use with Sealey Viking 2 & 3 Tonne Jacking Beams. Used in conjunction with Model No's SJBEX.A06 or SJBEX.A07 Jacking Beam Extensions.Features & Benefits:• Textured rubber provides high amount of grip while remaining soft, to prevent damage to the car underbody.• Slot in the support block allows the car to be lifted by the sill.• Manufactured from zinc plated steel and rubber, providing a sturdy and durable point …

Use in conjunction with Model No. RE91/05 Pull Ram. The kit contains 2 x 2m chains each with one hook and two heavy-duty pull clamps. Features & Benefits: • Use in conjunction with Model No. RE91/05 more→Pull Ram. • The kit contains 2 x 2m chains each with one hook and two heavy-duty pull clamps. • Model No. RE91/5/CK Specifications: Model No RE91/5/CK Brand: Sealey Nett Weight: 12.60kg

• Optional Bobbin Support for Model No. RPS2.• Designed to give extra support and added stability once rear axle has been located and raised.• Yellow phosphate finish for added corrosion resistance.Op more→tional Bobbin Support for Model No. RPS2. Designed to give extra support and added stability once rear axle has been located and raised. Yellow phosphate finish for added corrosion resistance.• Optional Bobbin Support for Model No. RPS2. • Designed to give extra support and added stability once rear axle has been located and raised. • Yellow phosphate finish for added corrosion resistance. • Model No. RPS1BSTechnical Specification:Length: 105mmNett Weight: 0.34kgQuantity: 2Dimensions: Length: 115mm …

Flat arm with spring loaded roller bearings for use with SJBEX3000S and SJBEX4000S Jacking Beams. When unloaded these arms support the weight of the beam, allowing for it to run smoothly along the pit more→edge. In position, and when the beam is under load, the bearings retract, to leave the flat of the arm, to stabilise the lift.Features & Benefits:• Flat arm with spring loaded roller bearings for use with SJBEX3000S and SJBEX4000S Jacking Beams.• When unloaded these arms support the weight of the beam, allowing for it to run smoothly along the pit edge.• In position, and when the beam is under load, the bearings retract to leave the flat of the arm to stabilise the lift.• Model No. SJBEX.A01Speci…

• All steel stand with pin and chain load support.• Full width V-crutch for safe support of load.• Manufactured to rigorous safety standards.• Sold in pairs.All steel stand with pin and chain load sup more→port. Full width crutch for safe support of load. Manufactured to rigorous safety standards. Sold in pairs.• Min./Max. Working Height: 490/730mm. • Capacity: 15tonne per pair. • All steel stand. • Pin and chain load support. • Full width V-crutch. • Manufactured to rigorous safety standards. • Sold in pairs. • Model No. AS7500Technical Specification:Capacity Each: 7.5 TonneCapacity Pair: 15 TonneMaximum Working Height: 730mmMinimum Working Height: 490mmNett Weight: 22.71kgDimensions: Length: 425mm x Height: …

• A fully adjustable saddle with forward, backward and side-to-side tilt.• Suitable for use with Model No's 300ETJ and 500ETJ.Fully adjustable saddle with forward, backward and side-to-side tilt. Suit more→able for use with Model No's 300ETJ and 500ETJ.• A fully adjustable saddle with forward, backward and side-to-side tilt. • Suitable for use with Model No's 300ETJ and 500ETJ. • Model No. ADT7Technical Specification:Capacity: 500kgCompatibility: 300ETJ, 500ETJNett Weight: 12.02kgDimensions: Length: 309mm x Height: 111mmWeight: 12.024KgWarranty: 1 year

• A fully adjustable saddle with forward, backward and side-to-side tilt.• Note: When using these adjustable supports the maximum capacity of the jack and support combination will be limited to the lo more→west specified capacity in the combination. e.g. 600GA and ADT3 - Maximum capacity is 500kg.Fully adjustable saddle with forward, backward and side-to-side tilt. Suitable for Model No's. 300TR, 300TRQ, 600TR, 600TRQ.• A fully adjustable saddle with forward, backward and side-to-side tilt. • Suitable for Model No's. 300TR, 300TRQ, 600TR, 600TRQ. • Note: When using these adjustable supports the maximum capacity of the jack and support combination will be limited to the lowest specified capacity in the com…

• Handles and levels heavy, off-centre loads quickly and easily.• Ball-bearing handle allows for a smooth and easy adjustment.• Three adjustment holes accommodate different sized engines.• Ideal for c more→ar, van, truck and marine engines.• If used with cranes of capacity 680kg or more, the load must be restricted to 680kg maximum.• Supplied with 4 x 275mm chains and 4 x 'L' shaped brackets with additional karabiner styled screw links.Handles and levels heavy, off-centre loads quickly and easily. Ball-bearing handle allows for a smooth and easy adjustment. Three adjustment holes accommodate different sized engines. Ideal for car, van, truck and marine engines. Suitable for use with all cranes on pa…

• Triple castor wheel design allows a stabile multi-directional movement of motorcycle once lifted.• Features width adjustment from 300 to 375mm, making it suitable for most types of motorcycle.• Desi more→gn ensures rim and tyre protection at all times.• Once the bike is supported, allows easy removal and cleaning of rear wheel.• Please note: For full floating movement, use in conjunction with FPS1MD.Technical SpecificationNett Weight: 5.7kg

• Triple castor wheel design allows a stabile multi-directional movement of motorcycle once lifted.• Features width adjustment from 185 to 265mm, making it suitable for most types of motorcycle. • Des more→ign ensures rim and tyre protection at all times.• Once the bike is supported, allows easy removal and cleaning of front wheel.• Please note: All front paddock stands need to be used in conjunction with a suitable rear stand to ensure bike stability (See Model No's RPS2 or, for full floating movement, use RPS2MD).Technical SpecificationNett Weight: 6.4kg

Single-piece hydraulic unit with heavy chassis design and large jacking saddle (Pad available as optional extra - Model No. JP17). Universal joint release mechanism allows safer, more controlled lower more→ing of the jack. Twin piston Super Rocket Lift feature brings lifting arm straight into contact with the jacking point. Polyurethane wheels for smoother manoeuvrability and helps prevent damage to workshop floor. Fitted with safety overload valve and pump-through valve to prevent handle locking at maximum ram extension. Ideal for loaded vans up to 3.5 Tonne GVW. Supplied with Pin Type Axle Stands, 3 Tonne (3000kg) capacity per stand, 6 Tonne (6000kg) per pair. Min./Max. Working Height: 290/435mm.…

• Super economy model delivered in knock-down form for reduced freight cost.• Fast folding model provides easy storage and transportation.• Heavy-duty castors.• Weighs only 75kg and is perfect for mob more→ile or workshop use.• Side pump access with removable handle.Super economy model delivered in knock-down form for reduced freight cost. Fast folding model provides easy storage and transportation with heavy-duty castors. Weighs only 75kg and is perfect for mobile or workshop use. Side pump access with removable handle.• Lifts 1000kg at 830mm jib extension. • Fast folding design. • Heavy-duty castors. • Weighs only 75kg. • Side pump access with removable handle. • Delivered in knock-down form. • …

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type C design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. D more→esign Type C. Profile Depth 22.7mm. Size ø122.7mm. Fits saddle ø122-126mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type C. • Profile Depth: 22.7mm. • Size: ø122.7mm. • Fits saddle ø122-126mm. • Model No. JP05Technical Specification:Nett Weight: 0.19kgJack Pad Size: ø122.7mmStyle: Type CProfile Depth: 22.7mmTo Fit Saddle Size: ø122-126mmWeight: 0.19kgDimensions: Length: 30mm x Height: 190mmWeight: 0.188KgWarranty: Consumable…

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type C design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. D more→esign Type C. Profile Depth 31.4mm. Size ø140mm. Fits Saddle ø139-140mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type C. • Profile Depth: 31.4mm. • Size: ø140mm. • Fits saddle ø139-140mm. • Model No. JP03Technical Specification:Nett Weight: 0.32kgJack Pad Size: ø140mmStyle: Type CProfile Depth: 31.4mmTo Fit Saddle Size: ø139-140mmWeight: 0.32kgDimensions: Length: 141mm x Height: 32mmWeight: 0.306KgWarranty: Consumable

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. D more→esign Type B. Profile Depth 12mm. Size ø136.5mm. Fits saddle ø136.5mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 12mm. • Size: ø136.5mm. • Fits saddle ø136.5mm. • Model No. JP08Technical Specification:Nett Weight: 0.23kgJack Pad Size: ø136.5mmStyle: Type BProfile Depth: 12mmTo Fit Saddle Size: ø136.5mmWeight: 0.23kgDimensions: Length: 20mm x Height: 280mmWeight: 0.246KgWarranty: Consumable

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. D more→esign Type B. Profile Depth 6.4mm. Size ø106.5mm. Fits saddle ø99-106mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 6.4mm. • Size: ø106.5mm. • Fits saddle ø99-106mm. • Model No. JP02Technical Specification:Nett Weight: 0.06kgJack Pad Size: ø106.5mmStyle: Type BProfile Depth: 6.4mmTo Fit Saddle Size: ø99-106mmWeight: 0.06kgDimensions: Length: 10mm x Height: 190mmWeight: 0.07KgWarranty: Consumable

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type A design.• Fits over the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Des more→ign Type A. Profile Depth of 19mm. Size ø148mm. Fits saddle ø128-131mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type A. • Profile Depth: 19mm. • Size: ø148mm. • Fits saddle ø128-131mm. • Model No. JP04Technical Specification:Nett Weight: 0.29kgJack Pad Size: ø148mmStyle: Type AProfile Depth: 19mmTo Fit Saddle Size: ø128-131mmWeight: 0.29kgDimensions: Length: 20mm x Height: 280mmWeight: 0.3KgWarranty: Consumable

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type A design.• Fits over the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Des more→ign Type A. Profile Depth 27mm. Size 118.5mm Square. Fits saddle ø100-106mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type A. • Profile Depth: 27mm. • Size: 118.5mm Square. • Fits saddle ø100-106mm. • Model No. JP01Technical Specification:Nett Weight: 0.18kgJack Pad Size: 118.5mm (Square)Style: Type AProfile Depth: 27mmTo Fit Saddle Size: ø100-106mmWeight: 0.18kgDimensions: Length: 30mm x Height: 190mmWeight: 0.196KgWarranty: Consumable