United Kingdom

Car Jacks

 prices on 453 models  
£90
clear
Save List
Show
66.85Buy!
£
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Fitted with overload valve. Dual-stage rams allow for longer travel. Lower retracted and higher extended heights. Base and reservoir machine welded for increased strength and eliminates leakage. Suppl more→ied with 3-piece handle.4 Tonne Telescopic Bottle Jack• Fitted with overload valve. • Dual-stage rams allow for longer travel.• Stage 1 capacity 7500kg.• Stage 2 capacity 4000kg.• Lower retracted and higher extended heights. • Base and reservoir machine welded for increased strength and eliminates leakage. • Supplied with 3-piece handle.• Model No. SJT4Model No: SJT4:Brand: Sealey:Capacity: 4 Tonne:Hydraulic Lift: 170mm:Maximum Height: 390mm:Minimum Height: 160mm:Nett Weight:
40.99Buy!
£
Amazon.co.uk
Delivery: to United Kingdom
Report
Car Scissor Jack / Lift Jack With Ratchet Kit With L Wrench Quick Car Jack Sizes: 1 ton Suitable for car lift in home or garage Floor Car jack Suitable for Car, Van, SUV Car scissor jack with ratch more→et is a lightweight and compact tool suitable for emergency and breakdown- easy to store in a car's trunk or under a seat Wheel L-wrench universal. Extendable power lever up to 53 cm Necessary tool for car lifting and tyre change Speed ratchet - to enable you to make the lifting process easy and quick Quality Car Lift Scissor Jack for all type of cars Brand: alca Germany
Specifications:Ports & interfaces: - Connector 1 : QD- Connector 2 : 3.5 mm- Connector 1 form factor: Straight- Connector 2 form factor: StraightSustainability- Sustainability certificates: CEPackagin more→g data: - Package width: 135 mm- Package depth: 5 mm- Package height: 200 mm- Package weight: 40 g
• Single nylon reinforced rubber wheel chock.• Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°.• Fitted with eye bolt for rope or chain.Si more→ngle nylon reinforced rubber wheel chock. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Fitted with eye bolt for rope or chain. Suitable for vehicles below 10 Tonne.• Single nylon reinforced rubber wheel chock. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12 degrees. • Fitted with eye bolt for rope or chain. • Suitable for vehicles below 10tonne. • Model No. WC03Technical Sp…
30.90Buy!
£
Idealo.co.uk
Delivery: in United Kingdom
Report
Max Load 10 t / Hubhöhe 390 mm
49.99Buy!
£
Zoro.co.uk
Delivery: in United Kingdom
Report
High quality, ultra-strong bottle jack - designed for effortless lifting. Can be used vertically or angled to 3 degrees from a vertical position. Features and Benefits Features a wide, rugged base tha more→t provides excellent stability and strength Provides peace of mind - all critical stress points on the jacks are reinforced for added durability and dependability Cast iron bases with a steel cylinder housing and an adjusting notched saddle Fitted with an overload protection valve Typical Applications Suitable for lifting or positioning vehicles, machinery, houses and/or other building structures but after lifting, loads must be immediately supported by jack stands Standards Met Complies with the …
• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. D more→esign Type B. Profile Depth 14.5mm. Size ø95mm. Fits saddle ø95-97mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 14.5mm. • Size: ø95mm. • Fits saddle ø95-97mm. • Model No. JP14Technical Specification:Nett Weight: 0.15kgJack Pad Size: ø95mmStyle: Type BProfile Depth: 14.5mmTo Fit Saddle Size: ø95-97mmWeight: 0.15kgDimensions: Length: 20mm x Height: 190mmWeight: 0.15KgWarranty: Consumable
For repairs and maintenance. Suitable for most standard cars. Platform height 200mm; platform width 205mm approx. Extensions are available to lower the angle for low ground clearance vehicles Stock No more→23306. Sold loose.
8.86Buy!
£
Joom.com
Delivery: in United Kingdom
Report
Jacking points on for BMWs commonly get damaged due to the wrong jack pad stand being used when lifting the vehicle. Leave ugly jacking points. Chopped up and inverted. So we made this rubber jacking more→pad. Our pads are made out of solid rubber from one mould to ensure the utmost safety when lifting the vehicle. Features: Effectively avoid being damaged during lifting by jack. Made by professional manufacturer, quality assurance. Special design for BMW. Fitment: For MINI R50, R52, R23, R55, R56, R57, R58, R59, R60, R61 (2001-Present Coupe, Convertible, Hatch, Clubman, Clubvan) For BMW 1-series E81, E82, E87, E88, 1M, F20, F21 For BMW 2-series F22, F23 For BMW 3-series E46, E90, E91, E92,
19.99Buy!
£
Zoro.co.uk
Delivery: in United Kingdom
Report
B0078 Swivel Castors to Suit ZT1024492X, Pack of 2 by Kennedy
• Farm jack mount for use on 4x4 external spare wheel mount.• Designed for transporting farm jacks when going off-road.• Adjustable base makes it suitable for most vehicles with an externally mounted more→spare wheel.Farm jack mount for use on 4x4 external spare wheel mount. Designed for transporting farm jacks when going off-road. Adjustable base makes it suitable for most vehicles with an externally mounted spare wheel.• Farm jack mount for use on 4x4 external spare wheel mount. • Designed for transporting farm jacks when going off-road. • Adjustable base makes it suitable for most vehicles with an externally mounted spare wheel. • Minimum/Maximum Depth: 120/175mm. • Model No. FJWMBTechnical Specification:Ne…
73.99Buy!
£
Vevor.co.uk
Delivery: to United Kingdom
Report
VEVOR Motorcycle Lift ATV Scissor Jack Dolly 1100 lbs Wide Deck & Hand CrankPremium Central Shaft4 Universal CastersRemovable Crank HandleWidely ApplicableNon-slip Wide PlatformStore with EaseItem Mod more→el Number: M110203,Length of Handle: 5.1 inch/130 mm,Max. Capacity: 1100 lbs/0.5 ton,Top Platform Size: 14.6 x 9 inch/370.8 x 228.6 mm,Net Weight: 45.6 lb/20.7 kg,Lifting Range: 4.7-15.4 inch/120-390 mm,Product Size: 14.6 x 9 x 4.7 inch/370.8 x 228.6 x 119.4 mm
59.99Buy!
£
Zoro.co.uk
Delivery: in United Kingdom
Report
Bottle jack, with hydraulic unit, max. load 2 t. Supplied = assembled. Max. load = 2 t. Lifting range with lifting head = 158 - 298 mm. Lift = 90 mm. Weight = 2.2 kg. Overall height from - to = 158 - more→298 mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can also be unscrewed by means of a thread. The bottle jack is a reliable tool in the workshop and as a vehicle accessory.
Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength more→polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…
Expert Quality, polyester webbing, 60mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 2000kg for a load at one en more→d (straight configuration) and 4000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.
21.73Buy!
£
Joom.com
Delivery: in United Kingdom
Report
Technical Specifications Type: Car lift accessories Material: Rubber Color: Black 4Pcs Rectangle 115*80*25mm Shape: Rectangle Length: 115mm/4.5" Thickness: 25mm/1" Mounting holes Dia.: 12mm/0.5" Mount more→ing Spacing: 37*56mm Features and Benefits ● This is a set of 4 HEAVY DUTY lift pads. ● These were found on many different brand lifts. ● These are very thick and very durable. They are able to hold up to sharp sub-frames and pinch weld lifting points. Notice 1. Please allow 1-2mm error due to manual measurement.Pls make sure you do not mind before you bid. 2. The color may have different as the difference display,pls understand. Package Included 4 x Rubber Arm Pads
10.99Buy!
£
Amazon.co.uk
Delivery: to United Kingdom
Report
Metal Adapter Bracket For Hydraulic Jack | Dedicsated U shape for lifting caravans,motorhomes, camping vehicles Double Edge Adapter for Hydraulic Jacks Inner Diameter: 20/27 mm | Contact Area: 45 x 5 more→3 mm Lift Jack Adapter Made of high quality steel, will not damage the vehicle. The adapater fits most of the bottle jacks but please check the dimensions before buying/ This is a high-quality HEYNER product
Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). A more→ll duplex slings are manufactured to the European lifting sling standard, giving a 7:1 safety factor. Each sling is individually numbered for traceability and is supplied with a certificate of conformity.Working Load Limit: 2 tonne x 6 metre
• Hydraulic oil recommended for use in all jacks (trolley and bottle) and cranes.• N.B. Never use brake fluid to top-up a hydraulic unit.Hydraulic oil recommended for use in all jacks (trolley and bot more→tle) and cranes.N.B. Never use brake fluid to top-up a hydraulic unit.• Recommended for use in all jacks (trolley and bottle) and cranes. • Model No. HJO5LSTechnical Specification:Nett Weight: 4.17kgPack Qty: 1Size: 5LDimensions: Length: 130mm x Height: 285mmWeight: 4.37KgWarranty: Consumable
69.99Buy!
£
Amazon.co.uk
Delivery: to United Kingdom
Report
Scissor Jack 1.5 ton suitable for many BMW sedan models cars Max. working stroke 250-385mm. Mix. lifting height (folded) 104mm. Max. lifting height (full lifted) 400mm Can be used with 17 mm socket, more→incl. comfort extension bar, ratchet with practical rotary knob for easy cranking up Includes storage bag Equipped with a practical rotating saddle including a rubber pad and a sturdy crank with handle. HEYNER is German manufacturer of quality automotive tools and lifting equipment such as bottle jacks, axle jack stands, lift jacks and trolley jacks.sers to reach and operate the jack in hard-to-access points, providing added convenience and versatility.
50.99Buy!
£
Amazon.co.uk
Delivery: to United Kingdom
Report
Car Scissor Jack 2 ton Capacity / KIT: Lift Jack With Speed Ratchet + L Wrench Min lifting height: 104mm Max. Lifting height 385mm |Quick and Effective Car Lift Jack Sizes: 2 tons. Suitable for car l more→ift in home or garage 2 Ton Capacity Lift Jack: Floor Car Jack Suitable for bigger size cars, Van, SUV Car scissor jack with ratchet is a lightweight and compact tool suitable for emergency and breakdown- easy to store in a car's trunk or under a seat Wheel L-wrench universal. Extendable power lever up to 53 cm Necessary tool for car lifting and tyre change Speed ratchet - to enable you to make the lifting process easy and quick Quality Car Lift Scissor Jack for all type of cars Brand: alca …
• Triple castor wheel design allows a stabile multi-directional movement of motorcycle once lifted.• Features width adjustment from 185 to 265mm, making it suitable for most types of motorcycle. • Des more→ign ensures rim and tyre protection at all times.• Once the bike is supported, allows easy removal and cleaning of front wheel.• Please note: All front paddock stands need to be used in conjunction with a suitable rear stand to ensure bike stability (See Model No's RPS2 or, for full floating movement, use RPS2MD).Technical SpecificationNett Weight: 6.4kg
69.59Buy!
£
Electricalworld.com
Delivery: in United Kingdom
Report
Expert Quality, polyester webbing, 150mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 5000kg for a load at one e more→nd (straight configuration) and 10,000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.
38.00Buy!
£
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Fitted with overload valve. Base and reservoir machine welded for increased strength and eliminates leakage. Supplied with 2-piece handle.2 Tonne Bottle Jack• Min./Max. Height: 168/316mm.• Fitted with more→overload valve.• Base and reservoir machine welded. • Supplied with 2-piece handle.• 3 Year guarantee*.• Model No. PBJ2SModel No: PBJ2S:Brand: Viking:Capacity: 2 Tonne:Hydraulic Lift: 100mm:Maximum Height: 316mm:Minimum Height: 168mm:Nett Weight: 2.2kg:Screw Extension: 48mm:PTDSEAPBJ2S
21 more item(s)
Filters
Price
from£ up to£ 
Brands
Type
Lifting mechanism
Maximum load
More features
Min. height
Lifting height