Car Jacks

Textured rubber provides high amount of grip while remaining soft, to prevent damage to the car underbody. Slot in the support block allows the car to be lifted by the sill. Manufactured from zinc plated steel and rubber, providing a sturdy and durable point of contact. Suitable for use with Sealey Viking 2 & 3 Tonne Jacking Beams. Used in conjunction with Model No's SJBEX.A06 or SJBEX.A07 Jacking Beam Extensions.Features & Benefits:• Textured rubber provides high amount of grip while remaining soft, to prevent damage to the car underbody.• Slot in the support block allows the car to be lifted by the sill.• Manufactured from zinc plated steel and rubber, providing a sturdy and durable point …

• Designed to support and accurately position engines during maintenance operations such as replacing anti-vibration mountings and certain body panels.• Also used as an aid for the removal of gearboxes and transmissions.• Beams supported on rubber feet and fine adjustment control is obtained by using double screw/hook mechanisms.• Supplied with two short lengths of chain.Supports and accurately positions engine during maintenance operations such as replacing anti-vibration mountings and certain body panels. Also used as an aid for the removal of gearboxes and transmissions. Beam supported on rubber feet and fine adjustment control is obtained by using double screw/hook mechanisms. Supplied with two…

• Fitted with overload valve. • Base and reservoir machine welded for increased strength and eliminates leakage. • Supplied with 2-piece handle.• 3 Year guarantee*.Technical SpecificationCapacity: 12 TonneHydraulic Lift: 150mmMaximum Height: 441mmMinimum Height: 231mmNett Weight: 6.4kgScrew Extension: 60mmTechnical Specification:Capacity: 12 Tonne Hydraulic Lift: 150mm Maximum Height: 441mm Minimum Height: 231mmDimensions: Length: 140mm x Height: 240mmWeight: 6.6KgWarranty: 3 years

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…

Bottle jack, with hydraulic unit, max. load 20 t. Supplied = assembled. Max. load = 20 t. Lifting range with lifting head = 235 - 440 mm. Lift = 145 mm. Weight = 10 kg. Piston diameter = 48 mm. Base plate length = 153 mm. Base plate width = 162 mm. Additional height when unwound = 60 mm. Overall height from - to = 235 - 440 mm mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can …

Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). All duplex slings are manufactured to the European lifting sling standard, giving a 7:1 safety factor. Each sling is individually numbered for traceability and is supplied with a certificate of conformity.Working Load Limit: 3 tonne x 3 metre

• Steel construction car ramp extensions to decrease ascent angle.• Ideal for cars with low ground clearance.• Attaches to standard car ramps with a minimum width of 195mm.• Suitable for use with Model No. CAR2000.Steel construction car ramp extensions to decrease ascent angle. Ideal for sports cars and vehicles with low ground clearance. Attaches to standard car ramps with a minimum width of 195mm. Suitable for use with Model No. CAR2000.• Steel construction car ramp extensions to decrease ascent angle. • Ideal for cars with low ground clearance. • Attaches to standard car ramps with a minimum width of 195mm. • Suitable for use with Model No. CAR2000. • Length: 630mm. • Capacity: 400kg Each…

Expert Quality, polyester webbing, 120mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 4000kg for a load at one end (straight configuration) and 8000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Depth 7.7mm. Size ø91.5mm. Fits saddle ø90-95mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 7.7mm. • Size: ø91.5mm. • Fits saddle ø90-95mm. • Model No. JP12Technical Specification:Nett Weight: 0.055kgJack Pad Size: ø91.5mmStyle: Type BProfile Depth: 7.7mmTo Fit Saddle Size: ø90-95mmWeight: 0.055kgDimensions: Length: 10mm x Height: 190mmWeight: 0.06KgWarranty: Consumable

• Suitable for use with our lever hoists or chain blocks.• Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways.• Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer.Suitable for use with our lever hoists or chain blocks. Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer.• Suitable for use with our lever hoists or chain blocks. • Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. • Incorporates wheel guards to prevent contact with other trolleys mounted on same load…