Other security and video

AXIS T91A11 Plastic Stand (White) for AXIS M11 Series, AXIS M3006-V, AXIS M3007-P, AXIS M3007-PV Network Cameras. Plastic camera stand for wall- or ceiling mount. Included with AXIS M11 indoor series.

AXIS T91A64 Corner Bracket is an aluminum bracket for mounting Axis network cameras on external corners. A wall mount is required for the installation.

Ethernet has a limited cable length between the switch and the camera of 100m (328 ft.). When needed to cover a longer distance, a switch is normally used as a repeater, or optical fiber may be used.To overcome this distance limit, network installers can simply connect an AXIS T8129 PoE Extender in-line with the Cat-5e or Cat-6 cable, and forward the rest to the camera. Dependent on midspan and camera type, the connection in total can be between 200-400 meters (656-1312 ft.).Compatibility:- AXIS T8129 PoE Extender is compatible with all Axis network video products with PoE, and supports both IEEE 802.3af and IEEE 802.3at. Check in the Typical set-up section for connection examples with Axis …

Axis 5026-401 PoE adapter

AXIS Din Rail Clip for AXIS T8640 Ethernet over Coax Adaptor PoE+.

Axis 5500-851 camera kit

1.5 inch NPT thread adaptor for pendant mount. For connecting to ceiling mountings with 15 inch NPT thread.

Ultra wide varifocal lens for megapixel camerasN/AN/AThis lens provides an ultra wide field of view without distortion. It is a varifocal lens allowing the user to optimize the field of view from wide angle to ultra wide. It is a high quality lens designed to allow the installer to take full advantage of the high resolution of HDTV and multi megapixel cameras. The lens incorporates patented Linear Optical Technology which allows an ultra wide field of view without barrel distortion. The rectilinear design allows increased resolution at the edges of the image thus increasing the probability of detection. The focal length is 1.8 3.0 mm and the lens fast aperture (F-number) is 1.8.

DIN rail mounting clip for standard 35mm DIN rail. Inlcudes mounting plate and screws for attaching the device.

For indoor or outdoor use. Plate dimensions: diameter 164 mm (6.5) height 6 mm (0.3). Plate fits directly to:N/A- Single-gang boxN/A- Double-gang boxN/A- 4" Square junction boxN/A- 4" Octagon junction box

Axis T94f01p Conduit Back Box

AXIS T91B63 is an aluminum ceiling mount that includes AXIS T94A01D Pendant Kit (only used in combination with PTZ cameras) and AXIS T91A6 Pipe Seal. The ceiling mount is also compatible with Axis pendant kits with 1.5" NPS inner thread and Axis ACI 3/4" conduit adapters. The cables can be routed through the back or from the side by using a conduit connection.

Axis 5504-711 security camera accessory Mount

White plastic adapter for mounting AXIS P3904-R and AXIS P3905-R on flat surfaces. Used when the cable must enter from the side.

Axis 5504-961 camera lens IP Camera Wide lens Black

Optional megapixel lenses for compact network cameras (megapixel or lower resolution). These megapixel lenses have been carefully selected to provide a high quality image with an alternative field-of-view. This gives your compact network cameras a range of new possibilities.N/AN/ACompatible with:N/AN/A- AXIS M3011N/A- AXIS M3113-RN/A- AXIS P3904-RN/A- AXIS P3905-RN/A- AXIS P3915-R

Axis 5505-091 security camera accessory

AXIS T94F01S MOUNT BRACKET

Aluminum vandal resistant IK10-rated back box. It can be mounted directly on a wall hard ceiling or a junction box. It includes AXIS Conduit Adapter U-shape 30 mm A.

When used together with AXIS TQ1601-E Conduit Back Box the Ethernet cable can be routed through cable protection pipes/conduits along the wall (from left or right). AXIS T94Q01A is IK10 rated and compatible with all Axis outdoor fixed box cameras and housings.

Standalone model. Please note that the camera cannot be mounted on the cabinet door. For camera specific cabinets please see the other models. It includes pre-mounted: AXIS T8604 Media Converter Switch AXIS Electrical Safety kit and Power Supply DIN CP-D 12/2.1 25 W. This cabinet can be used with cameras supporting 12 V DC such as:

AXIS Q1765-LE Fixed Camera

AXIS Q3505-VE Fixed Dome Camera

AXIS P5414-E and P5415-E PTZ Dome Cameras

AXIS Q1931-E and Q1932-E Thermal Cameras

AXIS T93F10 Outdoor Housing

For sturdy mounting directly on a wall or ceiling. Can also be attached to an Axis wall-mount stand.

Axis 5505-841 mounting kit