Car Jacks

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…

• Base and reservoir machine welded for increased strength and reduced chance of leakage.• Fitted with overload valve.• Supplied with 2-piece handle.• Fitted with carrying handle.Base and reservoir machine welded for increased strength and reduced chance of leakage. Fitted with overload valve. Supplied with 2-piece handle. Supplied with carrying handle.• Min./Max. Height: 227/457mm. • Fitted with overload valve. • Base and reservoir machine welded. • Supplied with 2pc handle. • Fitted with carrying handle. • Model No. SJ15Technical Specification:Capacity: 15tonneHydraulic Lift: 150mmMaximum Height: 457mmMinimum Height: 227mmNett Weight: 7.00kgScrew Extension: 80mmDimensions: Length: 151mm x Heig…

• Heavy-duty nylon reinforced rubber wheel chock.• Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°.• Features robust carry handle that can also be fitted with a rope or chain (not included).• Suitable for commercial, agricultural and aircraft tyres of diameter ø1500-1800mm.Heavy-duty nylon reinforced rubber wheel chock. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Features robust carry handle that can also be fitted with a rope or chain (not included). Suitable for commercial, agricultural and aircraft tyres of diameter ø1500-1800mm. Suitable for vehicles below 40…

Scissor Jack / Max Load 1.5 t / 2.5 kg

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type C design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type C. Profile Depth 22mm. Size ø99mm. Fits Saddle ø96.5-99mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type C. • Profile Depth: 20mm. • Size: ø99.5mm. • Fits saddle ø98-103mm. • Model No. JP19Technical Specification:Nett Weight: 0.135kgJack Pad Size: ø99.5mmStyle: Type CProfile Depth: 20mmTo Fit Saddle Size: ø98-103mmWeight: 0.135kgDimensions: Length: 20mm x Height: 165mmWeight: 0.138KgWarranty: Consumable

Expert Quality, polyester webbing, 50mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 1000kg for a load at one end (straight configuration) and 2000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

Perfect for garage use or for the home motor enthusiast, these durably constructed car ramps can be used together to lift vehicles of 2000kg or less to provide access for maintenance purposes. They can also be used to gain the clearance needed to insert a bottle jack. The solid frames of the car ramps are fitted with rungs to prevent slippage of the wheel after the car has been raised, & an extended rear face allows the ramps to be stood upright for convenient, space saving storage. For ease of use, and especially when working with low ground clearance vehicles like sports cars and custom builds, this set is also supplied with a matching pair of removable car ramp extensions. These fit onto …

Bottle jack, with hydraulic unit, max. load 2 t. Supplied = assembled. Max. load = 2 t. Lifting range with lifting head = 158 - 298 mm. Lift = 90 mm. Weight = 2.2 kg. Piston diameter = 23 mm. Base plate length = 95 mm. Base plate width = 93 mm. Additional height when unwound = 50 mm. Overall height from - to = 158 - 298 mm mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can also …

• Fitted with overload valve. • Base and reservoir machine welded for increased strength and eliminates leakage. • Supplied with 2-piece handle.• 3 Year guarantee*.Technical SpecificationCapacity: 8 TonneHydraulic Lift: 145mmMaximum Height: 447mmMinimum Height: 222mmNett Weight: 5.00kgScrew Extension: 80mmTechnical Specification:Capacity: 8 Tonne Hydraulic Lift: 145mm Maximum Height: 447mmDimensions: Length: 132mm x Height: 230mmWeight: 5.214KgWarranty: 3 years

Expert Quality, polyester webbing, 120mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 4000kg for a load at one end (straight configuration) and 8000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.