Jigsaw Blades

The Starlock AIZ 32 APB blade guarantees exact flush and deep plunge cuts in wood, metal and plastics. It cuts precisely right from the start thanks to a rounded cutting edge called Curved-Tec. The blade's Starlock sturdy mounting system increases control for highly accurate cutting that transmits power directly and reduces wobbling. This versatile blade also cuts through very hard combined wooden and metal materials including non-hardened nails and screws, non-ferrous pipes and profiles with smaller dimensions. When cutting non-hardened metals and abrasive materials, the BIM (bi-metal) combination of an HCS (high carbon steel) blade and HSS (high-speed steel) teeth resists wear and heat, ensuring …

The Makita TMA053 Plunge Cut Starlock Saw Blade is a popular Starlock multi-tool plunge cut saw blade suitable for cutting wood. Specifications • Diameter: 32x50mm • Material Type: BiM • Application: Wood • Tooth Count: 14 TPI • Pack Quantity: 5 Contents • 5x Makita TMA053 Plunge Cut Starlock Saw Blade

The DeWalt DT2976-QZ TCT Alligator Saw Blade is primarily used for cutting Class 20 Poroton and Building Block and is suitable for use ith the DWE397/398 and 399 Alligator Saw. Specifications • Length: 430mm • Tip Material: TCT • Primary Application: Class 20 Poroton and Building Block • Fits:DWE397/398//399Features & Benefits• Optimised for cutting Class 20 Poroton and Building Block • TCT Teeth to improve the performance of the DeWalt Alligator Saw

• E-Cut Carbide Pro• TiN-coated carbide plunge-cut saw blade with extremely good resistance to wear. Lasts 100% longer than uncoated carbide saw blades. Lasts 30 times longer than HSS saw blades. The right choice for tough materials, such as ferrous metals, stainless steel or copper pipes. Can even be used for hardened screws (Spax) and high-strength machine screws. But also ideally suited to abrasive materials, such as bricks, masonry or fibre cement boards as well as laminate, carbon fibre-reinforced plastic and fibreglass-reinforced plastic. Good cutting results and cutting quality in all timber materials, such as hardwood or chipboard.• Narrow, with waist for optimum cutting …

Compatibility - Check compatibility with other FEIN machines (see description below)
Slim, tapered shape for optimal cutting speed and good chip removal
Fit For Any Job - Fein Tool is available in two mount types, so one can find the ideal accessory for multifunctional tool. Whether it's StarLock or Fein SuperCut 12-sided mount, there's a Fein Tool that suits needs

The Vitrex 10 3412 Ultimate Diamond Blade is suitable for use in a tile cutter and has both high strength and durability. It has a continuous rim which produces extra clean cuts on ceramic, porcelain, granite, marble and natural stone. In addition, it helps to prevent chipping and cracking of tiles, which can be a common problem. For use with Vitrex Electric Cutters WS560180, 103420, 103421 and 103430. Diameter: 200mm.Additional Information:• Diameter: 200mm

EXPERT MetalMax for Long Life Cutting Hard Metal:- When hardened screws rust or otherwise get stuck, cutting them off perfectly flat to the surface is the only option. The EXPERT MetalMax makes a perfect flush cut even in hardened metal and, with its outstanding longevity, is the perfect accessory for the tradesman wanting to cut tough materials with a multitool.- You've seen the multitool's astonishing ability to cut into and through wood with ease: with the Bosch EXPERT MetalMax Blade for Multitool metal gets the same treatment. It even cuts hardened window screws and rebar with ease.Features:- Long Life Cutting Hard Metal- Exceptional durability is built in with Bosch Carbide Technology- …

Lasts up to 50x longer than a Bi-Metal bladeWhen hardened screws rust or otherwise get stuck, cutting them off perfectly flat to the surface is the only option. The Expert MetalMax makes a perfect flush cut even in hardened metal and, with its outstanding longevity, is the perfect accessory for the tradesman wanting to cut tough materials with a multitool.The Expert MetalMax is at the very cutting edge of Bosch Carbide Technology. Not only are its teeth made from a strip of extremely hard metal that can cut even stainless steel, it also boasts a high-tech extra coating for maximum longevity. The flat edge is optimised for cut-offs as it is less prone to skidding on screws or pipes.You’ve seen th…

• E-Cut Carbide Pro• TiN-coated carbide plunge-cut saw blade with extremely good resistance to wear. Lasts 100% longer than uncoated carbide saw blades. Lasts 30 times longer than HSS saw blades. The right choice for tough materials, such as ferrous metals, stainless steel or copper pipes. Can even be used for hardened screws (Spax) and high-strength machine screws. But also ideally suited to abrasive materials, such as bricks, masonry or fibre cement boards as well as laminate, carbon fibre-reinforced plastic and fibreglass-reinforced plastic. Good cutting results and cutting quality in all timber materials, such as hardwood or chipboard.• Narrow, with waist for optimum cutting …

The hooked tip is useful for removing creepers and cutting twigs. Super Turbocut teeth provide effortless cutting of wood in all directions. the bark cutter prevents the peeling-off of remaining bark when a branch is cut. It is also convenient to remove twigs and creepers. A notch in the cutting blade allows the saw to be hung on a branch during the pruning. The two section pole can readily be extended to a desired length by operating the lever and buttons.Features & Benefits:• JG-1 Grip• SH-UV Sheath• Curved Blade• Seperate bark cutterSpecifications:Surface Finishing: Hard-Chrome PlatingMaterial: High-Carbon SteelTooth Type: SUPER TURBOCUTImpulse Hardened: NoTooth Pitch: …

The hooked tip is useful for removing creepers and cutting twigs. Super Turbocut teeth provide effortless cutting of wood in all directions. the bark cutter prevents the peeling-off of remaining bark when a branch is cut. It is also convenient to remove twigs and creepers. A notch in the cutting blade allows the saw to be hung on a branch during the pruning. The two section pole can readily be extended to a desired length by operating the lever and buttons.Features & Benefits:• JG-1 Grip• SH-UV Sheath• Curved Blade• Integral bark cutterSpecifications:Surface Finishing: Chemical NickeledMaterial: Strip SteelTooth Type: SUPER TURBOCUTImpulse Hardened: NoTooth Pitch: 4.5mmTooth …

Starlock AII 65 APB blade offers long life for wide cuts in wood and non-hardened metal. The Starlock Snap-In mounting system allows fast blade removal and exchange within 3 seconds without having to touch the blade. The mounting system produces the highest power transfer thanks to a 3-dimensional tight-fitting connection between machine and accessory. Use this product with all Starlock, Starlock Plus and Starlock Max power tools as well as common multi-tools.Features:- BIM combination of an HCS blade and HSS teeth resists wear and heat to ensure use- Flat design reduces wobbling, enabling direct power transfer that minimises wear- Starlock mount for optimum power transfer and convenient blade …

The Starlock Snap-In mounting system allows fast blade removal and exchange within 3 seconds without having to touch the blade. The mounting system produces the highest power transfer thanks to a 3-dimensional tight-fitting connection between machine and accessory.Features:- BIM combination of an HCS blade and HSS teeth resists wear and heat- 3-dimensional Japanese tooth configuration minimises heat development for prolonged usage- Starlock mount for optimum power transfer and convenient blade change within 3 seconds.- Starlock Snap-In mounting system for fast blade removal and exchange within 3 seconds without having to touch the blade- Rounded cutting edge (Curved-Tec) ensures minimal tooth …

The DeWalt DT2975-QZ TCT Alligator Saw Blade is primarily used for cutting Gasbeton and Building Block and is suitable for use with the DWE397/398 and 399 Alligator Saw. Specifications • Length: 430mm • Tip Material: TCT • Primary Application: Gasbeton and Building Block • Fits: DWE397/398/399Features & Benefits• Optimised for cutting Building block and Gasbeton • TCT Teeth to improve the performance of the DeWalt Alligator Saw.

The DeWalt DT2974-QZ TCT Alligator Saw Blade is primarily used for cutting Class 12 Poroton and Building Block. This Saw blade is suitable for use with the DWE397/398 and 399. Specifications • Length: 430mm • Tip Material: TCT • Primary Application: Class 12 Poroton and Building Block • Fits: DWE397/398/399Features & Benefits• Optimised for cutting Class 12 Poroton and Building Block • TCT Teeth to improve the performance of the DeWalt Alligator Saw

2608661630 AIZ32 BB BIM 5-PC32x40mm HARDWOOD BLADE by Bosch

The DeWalt DT2964-QZ Alligator Saw Blade is primarily used for cutting Building block and Class 12 Poroton Brick and is suitable for use with the DW390/391 Alligator Saw. Specficiations • Length: 425mm • Tip Material: TCT • Primary Application: Building Blocks and Class 12 Poroton Brick • Fits: DW390/391Features & Benefits• Optimised for cutting Building brick and Class 12 Poroton Brick • TCT Teeth to improve the performance of the DeWalt Alligator Saw

The Starlock AII 65 APC blade delivers wide and precise cuts in wood. Its rounded cutting edge (Curved-Tec) allows for precise and smooth plunge cutting. The blade's flat design reduces wobbling to enable a controlled cut due to direct power transfer. The tapered-base body minimises jamming and removes material faster for an accurate cut. This product is intended for plunge cutting in softwood, for cutting door frames to length on the floor and for cutting recesses in furniture components. The Starlock Snap-In mounting system allows fast blade removal and exchange within 3 seconds without having to touch the blade. The mounting system produces the highest power transfer thanks to a 3-dimensional …