Car Jacks

• Replacement hydraulic ram for SC10LR.V3 engine crane.Technical SpecificationNett Weight: 11kgRam Capacity: 7257kgRam Diameter: 30mmRam Travel: 480mmPump Type: Single SpeedRam Pin Hole Diameter: 16.5mmClevis Pin Hole Diameter: 16.5mmMounting Point Distance (Min): 650mmOverall Length (Min): 665mmBase mount Type: Double ClevisTechnical Specification:Capacity: 7257kg Diameter: 30mmDimensions: Length: 710mm x Height: 150mmWeight: 9.99KgWarranty: 1 year

Ideal for workshop or roadside use, these jacks take the effort out of lifting heavy plant, tractors and commercial vehicles. For extra safety, features dead man’s handle which also aids controlled lowering speed. Supplied with extensions that close the gap between the saddle of the jack and the jacking point. A comprehensive range of nine models, see logo beside each jack for main features and the table beside for detailed specification. Features & Benefits: • Max. Height (inc. extn.): 463mm @ 30 Tonne. • Air Consumption: 10.5cfm. • Spring loaded dead man's control. • Handle locks in position at three different angles. • Lifts heavy plant, tractors and commercial vehicles. • Extensions: 45…

Expert Quality, polyester webbing, 50mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 1000kg for a load at one end (straight configuration) and 2000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• Two composite wheel chocks.• Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°.• Suitable for cars not exceeding 2 tonne gross weight.Two composite wheel chocks. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Suitable for cars not exceeding 2 tonne gross weight.• Two composite wheel chocks. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12 degrees. • Suitable for cars not exceeding 2tonne gross weight. • Model No. WC09Technical Specification:Dimensions (W x D x H): 80 x 185 x 100mmMaterial: CompositeNett Weight: 0.44kg…

Eight adjustable rollers (four each side), allow for easy turning of large deep tread tyres. Extra-large jacking handle allows for one-person operation. Wheel support bar with composite guard goes around wheel to ensure stability during transportation. Locking mechanism allows rollers to be fixed at eight preset positions. Mounted on two locking and two non-locking castors for improved stability and easy manoeuvrability. Ideal for use on agricultural and commercial wheels and tyres. Features & Benefits: • Min./Max. Wheel Diameter: Ø1000/2000mm. • Eight adjustable rollers (four each side), allow for easy turning of large deep tread tyres. • Extra-large jacking handle allows for one-person operati…

Perfect for garage use, or for the home motor enthusiast, these durably constructed car ramps can be used together to lift vehicles of 2000kg or less to provide access for maintenance purposes. They can also be used to gain the clearance needed to insert a bottle jack. The solid frames of the ramps are fitted with rungs to prevent slippage of the wheel after the car has been raised, & an extended rear face allows the car ramps to be stood upright for convenient, space saving storage. For low ground clearance vehicles, an extension is available for purchase separately (part number: RM1). Specifications: • Capacity per Pair: 2000kg • Length: 790mm • Car Ramp Height: 250mm • …

Flat arm with spring loaded roller bearings for use with SJBEX3000S and SJBEX4000S Jacking Beams. When unloaded these arms support the weight of the beam, allowing for it to run smoothly along the pit edge. In position, and when the beam is under load, the bearings retract, to leave the flat of the arm, to stabilise the lift.Features & Benefits:• Flat arm with spring loaded roller bearings for use with SJBEX3000S and SJBEX4000S Jacking Beams.• When unloaded these arms support the weight of the beam, allowing for it to run smoothly along the pit edge.• In position, and when the beam is under load, the bearings retract to leave the flat of the arm to stabilise the lift.• Model No. SJBEX.A01Speci…

• Heavy-duty 7 Tonne high level support stand.• Safely supports vehicles when wheel free operations are being carried out.• Independently UK load tested. • Sturdy welded steel construction for superior safety and strength.• Three types of large interchangeable crutches for good load distribution.• Supplied with captive pin load support.• Fitted with retracting castors for easy manoeuvrability.• Suitable for commercial and public service vehicles.• Sold as singles, but MUST be used in pairs, or multiples of.Heavy-duty high level stand to safely support vehicles when wheel free operations are being carried out. Independently UK load tested. Supplied with three interchangeable crutches for even …

• This engine stand accepts a wide variety of engines and transmissions.• The head swivels 360º for accessibility to all parts of the engine.• Fully adjustable mounting arms.• Swivel castors provide excellent manoeuvrability.• Maximum Load Length: 700mm.Accepts a wide variety of engines and transmissions. The heads swivel 360° for accessibility to all parts of the engine. Fully adjustable mounting arms. Swivel castors provide excellent manoeuvrability. Maximum Load Length: 700mm.• Accepts a wide variety of engines and transmissions. • Head swivels through 360°. • Swivel castors. • Fully adjustable mounting arms. • Model No. ES550Technical Specification:Capacity: 550kgNett Weight: 27k…