Effects Pedals

Self-adhesive Hook and Loop Tape 50 mm in width - 1 m long. Ideal for mounting devices on pedal boards.
Made in: Germany

The Electro Harmonix 9LDC-500 Power Supply grants you an easy tidy setup. Delivering 9 volts DC this power supply is suitable for the 2880 HOG Holiest Grail and 16-Second Delay pedals and will ensure theyre given the ultimate fuel they need to perform at their best. Play without the burden of electrical noise tainting your set use time and again thanks to immense durability and equip yourself with the kind of quality that only Electro Harmonix can provide. Whats more the 9LDC-500 also offers brilliant heat reduction and voltage damage protection meaning you can rely on it to deliver every time.

The DAddario XPND Pedal Riser is a blessing for the pedal enthusiast. Sometimes your favourite stompbox is at an awkward position or angle on stage making it hard to engage when its needed most. But with DAddarios handy pedal riser youll be troubled no more. Built from ultra-durable aluminium its simple to install and will raise your pedal to a prime easily accessible position.Even better you can fit a number of these across your XPND pedalboard if youre a real effects nut and with built-in cable routing itll help keep your stage manageable. This smaller size is ideal for a single pedal.

Instrument Equipment Bag

Momentary footswitch pedal for “non-latch” footswitch operations such as sustaining notes on electronic keyboards. It can also be used for things like punch in/out on Roland/BOSS recording gear.
Cable Length: 3 m
Polarity Switch: No
Original Colour by Producer: Black;Black
Colour: Black
Type: Sustain Pedal
Type-A Connector: Jack MONO 6,3 mm Male
Made in: Taiwan
Compatible with: Universal

Universal piano style sustain pedal. The Alesis ASP-2 is the perfect product for keyboard players who want the most realistic pedal action. Designed to work and feel just like an acoustic piano's sustain pedal, it has a specially-designed rubber bottom that grips the floor and won't move while you play. This classic-style pedal works with any Alesis digital piano, keyboard or MIDI controller and it also has a polarity switch for compatibility with virtually all other branded keyboards. Features: Classic and durable design with authentic piano style feel; Hardwired 6' (1.82m) cable with 1/4'' (6.35mm) connector; Polarity switch for compatibility with all electronic keyboards
Made in: China
Type-A …

Table Adapter Power Supply. 9V DC power supply, 2000 mA, Polarity: (-) center, (+) ring, Exchangable plug, incl. plugs: Euro
UK/EU Power supply included: No
Current: 2000 mA
Polarity: Center Minus
Made in: China
Power Supply: 240V
Voltage: 9V
Current (mA): 2000.0

Power to the pedals. The Mooer Wall 9V Pedal Power Supply offers you the means to fill your pedal with exactly what it needs - electricity. Coming with an EU plug it is perfect if you plan to take your gear to the continent or of course if you live there already. Whether you want to power a single pedal or daisy chain multiple pedals this power supply will happily deliver. With Mooers exceptional craftsmanship at its back it is perfect for the stage offering solid reliability and durability. You can count on it to deliver. *Please note: Picture is of UK version of product this product comes with EU plug*

The Nektar NP-1 and NP-2 universal foot switch pedals are solid, rugged and ideal for both studio and stage. Rubber gripping keep them in place during performances and polarity switching ensures they work with any keyboard or electronic product, requiring a foot switch. Universal piano style keyboard sustain foot switch pedal. Solid metal pedal and base with rubberized cover. Rubber foot plate for solid floor grip. Polarity switch - works with all keyboards. 6ft cable with 1/4'' TS jack plug. Weight: 1.6 lb.
Cable Length: 1,8 m
Compatible with: Universal
Type: Sustain Pedal
Type-A Connector: Jack MONO 6,3 mm Male
Polarity Switch: Yes
Colour: Black
Original Colour by Producer: Black;Black
Made …

Tremolo effect pedal for electric guitar that offers the classic, warm and mind-bending tremolo effects of vintage ‘60s amps. It provides dedicated Rate, Wave and Depth controls for awesome sound shaping, features a status LED for effect on/off and battery check and a first-class electronic On/Off switch for highest signal integrity in bypass mode. Pedal runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included). Dimensions: 173 x 99 x 58 mm. Weight: 272 g.
Battery Operation: Yes
UK/EU Power supply included: No
Type: Tremolo
Made in: China
Power Supply: Adapter

Universal expression pedal. Compatible with most expression pedal sockets. Rubber feet for solid floor-grip. Rubber contact surface. Sensitivity pot. Polarity switch. 183 cm cable with 6,3 mm jack plug. Weight: 318 g. Colour: Black
Made in: China

Love your FX 300? Then keep it safe with the LD Systems Padded Bag. From transport to breakdown your effects pedal is fully protected against knocks scratches and scrapes. Thats great news for touring artists who are always on the move. Bad weather? No problem. The Padded Bag for FX 300 keeps your equipment dry with a water-resistant nylon exterior. That means no nasty surprises getting in the way of your show. Space for your accessories and more. Carry all your gear with ease thanks to a large accessory pocket. Whether youre setting up or packing down carrying is easy with an ergonomic handle and shoulder strap. Live sound has never been this pain free.

Keyboard mono volume pedal that is equipped with assembled, fixed 2m long cable and jack, allowing connection to the output of the keyboard or any other instrument with mono output. The output of the pedal is then connected to the amplifier or similar source. Impedance: 20 kOhm. Dimensions: 86 x 198 x 60 mm.
Outputs: Jack 6,3 mm TS
Compatible with: Keyboard
Type: Volume
Inputs: Jack 6,3 mm TS
Made in: Italy

The Behringer PSU-HSB-ALL Power Adapter is designed for use with a wide variety of 9-volt devices including over 20 effects pedals at a time and keyboards. The adapter is supplied with 4 x assorted jumper cables and 2 x daisy-chain cables with 5 x connectors. With a transformerless design the PSU-HSB-ALL eliminates the 50/60-cycle hum and noise. The Behringer PSU-HSB-ALL features a 2-pin Euro plug and is designed for use with 220V - 240V sockets.

D’Addario XPND Pedal Risers are designed to elevate pedals in those “tough to stomp” places. Mont the risers using the included hook and loop strips and raise any pedal a full inch, making it easy to access. You can align multiple risers across your board as needed, and with built-in-cut-outs for simple cable routing, adding risers is quick and hassle-free. XPND Pedal Risers are built to last and are available in single or double width, to accommodate dual-sized or multiple pedals.
Variant: Large
Material: Aluminium
Made in: Vietnam
Colour: Black
Size: L

The Behringer UV300 Ultra Vibrato Pedal delivers vintage-inspired vibrato echoing the influence of the 60s and 70s. The vibrato pedal offers three separate settings to operate as well with unlatch bypass and latch which offer different opportunities for tonal creation. This tonal exploration doesnt stop there with dedicated Depth Rate Rise and Mode controls you can adjust every parameter of your sound to achieve your ideal setting. Utilising an active LED you can easily check the status of the pedal at any moment.

Approved 9V DC/670mA power supply with negative centre that is compatible with TC Electronic stompbox pedals.
Current: 501-700 mA
Plug Type: Barrel
Polarity: Center Minus
UK/EU Power supply included: No
Number of Outputs: 1
Current (mA): 700.0
ChargerType: Power Supply
Made in: China
Voltage: 9V
Power Supply: 240V

3-mode octaver effect pedal for electric bass guitar that allows for creating a monster sound by adding 2 additional tones using the guitar—1 and 2 octaves below the original tone. Pedal provides dedicated volume controls for all 3 tone types for awesome sound shaping, a flexible 3-mode Range switch that allows ultimate bass performance, a status LED for effect on/off and battery check and a first-class electronic On/Off switch for highest signal integrity in bypass mode. Pedal runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included). Dimensions: 54 x 70 x 123 mm. Weight: 330 g.
UK/EU Power supply included: No
Type: Octaver
Battery Operation: Yes
Power Supply: Adapter
Made in…

Stereo chorus guitar effect pedal that features dedicated Level, Tone, Rate and Depth controls for an incredible sound shaping. It also provides a status LED indicator for effect on/off and battery check, and a first-class electronic on/off switch that maintains incredible signal integrity in bypass mode. Pedal can be powered by either a 9 V battery or DC power supply (not included). Dimensions: 54 x 70 x 122 mm. Weight: ca 330 g.
Power Supply: Adapter
Made in: China
UK/EU Power supply included: No
Battery Operation: Yes
Type: Chorus

Double pedal booster for 3 effects designed for lifting pedals to the optimum level that can easy to switch between effect pedals located on Pedaltrain pedalboards. This pedal booster has a solid steel frame and can be installed on a pedalboard using velcro or screws, which are accessories.
Type: Pedalboard
Made in: China
Original Colour by Producer: Black;Black
Colour: Black
Variant: PB3
Zip: Yes

A standard in pedal switches, with a medal body for durability. Use as a damper switch or as a control switch for functions such as start/stop. Attached cable.
Made in: Japan

Zuma mounting kit for mounting Zuma power supply to Pedaltrain peadalboards.
Power Supply: None
Type: Pedalboard
Original Colour by Producer: Blue;Blue
Made in: USA
Colour: Blue
UK/EU Power supply included: No

Overdrive effect pedal for guitars that features original 4558 op amps and MA150 distortion diodes, and delivers the classic, authentic vintage vacuum tube-like sound. It provides dedicated Drive, Tone and Level, High/Low and Gain controls, blue status LED for effect on/off and battery check and top-quality on/off switch that maintains incredible signal integrity in bypass mode. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
Made in: China
Battery Operation: Yes
Type: Overdrive
UK/EU Power supply included: No

The Strymon 9V UK Power Supply can be used to power your Strymon effects pedal and any other 9V centre negative pedals. Offering up to 667mA the Power supply will make sure your pedal is running at maximum allowing you to use your pedal to the best of its ability. Its low noise operation and automatic worldwide voltage conversation Strymons official power supply is perfect as a replacement to keep your pedal going no matter where.