Effects Pedals

The Behringer UM300 stakes a claim for being the most versatile distortion pedal on the market. The EQ shaping options are a step above most similar units with a sweepable mid boost/cut which allows you to flick back and forth between old school mid-scooped metal tones and much fatter doomier mid-heavy sounds. This is complemented by the astonishing amount of gain this pedal can dish out. Id wager the Ultra Metal has more gain than any player needs but feel free to put this to the test. Always better to have too much than not enough!

Compression/sustain effect pedal for guitar that compress loud and boost low signals without degrading the original sound. Effect provides dedicated Level, Tone, Attack and Sustain controls, blue status LED for effect on/off and battery check and top-quality on/off switch that maintains incredible signal integrity in bypass mode. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
Type: Compressor;Sustainer
Power Supply: Adapter
UK/EU Power supply included: No
Made in: China
Battery Operation: Yes

Custom moulded in the UK to fit the contours of the Boss 500 Series. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Boss 500 Series.
Made in: United Kingdom
Type: Dust Cover
Compatible with: Boss 500 Series

Power Suply: Input: 100-240V ~ 50-60Hz / Output: 9V, 1.3APolarity: Center NegativeCompatible with DigiTech Whammy Pedal I, Whammy Pedal II, Whammy 4, Whammy 5, VHM5, MV5, GNX 1, VX 400, Vocalist Workstation, Vocalist Access, Vocalist VR, Vocalist Live 2, Vocalist Live 4, RP 3, S100, S400, RP 100 / 150 / 200 / 250 / 300 / 350, 500, RPx 400, Vocal 300, BP 200, Genesis 1, Jam Man Looper, Jam Man SoloXT Looper, Jam, Man Express XT Looper, Jam Man Stereo Looper, iStomp – 2,1 x 5,5 mm Barrel connector, negative center.
Current (mA): 1300.0
Polarity: Center Minus
Made in: China
Plug Type: Barrel
Voltage: 9V
Type: Power Supply

A chromatic pedal tuner. It offers 7 different tuning modes including normal, flat, double flat and chromatic mode. The tuning progress is displayed via a single-digit LED display and an 11-point stream meter. Two additional directional LEDs indicate the required tuning direction. In addition, the tuner is equipped with one ¼'' input, one ¼'' output and a Bypass output. Powered by a 9V battery or a 9V adapter (not included).
Made in: China
UK/EU Power supply included: No

Pedal Design Foot Pedal

The Truetone 1 Spot 9V Guitar Pedal Power Supply EU presents a source for all your music. A power cable you can always rely on the durable design is perfect for a gig environment. Able to withstand any on-stage antics that can sometimes occur youll be able to perform with confidence as your pedals remain on for the duration of your gig.Compact robust and reliable. This power supply securely attaches onto your pedal with 3m length so you can put your pedals exactly where you want them. At an affordable price you can ensure your gig goes smoothly - gear you can trust.

Custom moulded in the UK to fit the contours of the Headrush Mx5. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Headrush Mx5.
Made in: United Kingdom
Compatible with: Headrush Mx5
Type: Dust Cover

500mA, 305 cm cable lenght, 9V DC, switchmode power supply, 2.1/5.5mm connector (inside/outside), power LED, polarity minus inside, weight: 142 g
Plug Type: Barrel
Voltage: 9V
ChargerType: Power Supply
Polarity: Center Minus
Power Supply: 240V
UK/EU Power supply included: No
Current (mA): 500.0
Current: 201-500 mA
Number of Outputs: 1
Made in: China

Vintage-style phase shifter effect pedal for electric guitar that offers an authentic, classic three dimensional phase shifting - from rapid rotary speaker to impressive jet plane effects. It provides dedicated Rate control and separate Color switch for fine-tuning of effects speed and tone, a status LED for effect on/off and battery check and a true hard-wire bypass for ultimate signal integrity. Pedal runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included). Dimensions: 142 x 79 x 86 mm. Weight: 380 g.
Made in: China
UK/EU Power supply included: No
Type: Phaser;Rotary

Pedal Design Foot Pedal

Custom moulded in the UK to fit the contours of the Boss 200 Series. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Boss 200 Series.
Compatible with: Boss 200 Series
Made in: United Kingdom
Type: Dust Cover

Stylish, lightweight, and durable, the CB-GT1 bag is the perfect solution for transporting the GT-1 Guitar Effects Processor and essential accessories. The rugged exterior and thick internal padding shield your gear from bumps and bruises, while a convenient shoulder strap and reinforced handle make carrying easy.
Strap: Shoulder Strap;Yes
Made in: Vietnam
Type: Pedal Bag
Original Colour by Producer: Black;Black
Colour: Black
Handle: Yes
Waterproof: Yes
Padding: Yes

Bass Preamp / Pedal

Approved 12V DC/1000mA power supply with negative centre that is compatible with TC Electronic stompbox pedals.
Voltage: 12V
Polarity: Center Minus
Number of Outputs: 1
Current: 701-1000 mA
Plug Type: Barrel
Made in: China
UK/EU Power supply included: No
Power Supply: 240V
Current (mA): 1000.0
ChargerType: Power Supply

Compact and portable 3-button footswitch pedal for use with several DigiTech products, including The Jimi Hendrix Experience, The JamMan, or Expression Factory. Pedal provides increased functionality and convenient Hands-free control over up/down selection of Models, Mode changes, Loop selection, automatic Start/Stops, and auto record where applicable. It is equipped with durable metal chassis construction, one 1/4" input and 3 m stereo TRS cable.
Battery Operation: No
Colour: Black
Number of Buttons: 3
Type: Footswitch
Power Supply: Passive

Mix and match up to 4 TC-Helicon vocal effect pedals together conveniently, simply and with less cable clutter than ever before with this essential audio and power accessory kit-ideal for VoiceTone Singles. With the included 12-volt power supply and DC interconnect cables, there are many different options for connecting your TC-Helicon effects. The power supply in the Singles Connect kit is more than powerful enough to power one of our large multi-FX units and a VoiceTone Single pedal at the same time.
~ Length: 0 m
Made in: China
Colour: Black

The Behringer FCV100 V2 Volume and Modulation Pedal is a powerful two-in-one pedal that controls all the dynamics of your playing. Use your foot to alter the volume giving you hands-free control over your level. It also functions as an expression pedal when connected to devices with correct input. With adjustable minimum volume the level of expressiveness is totally up to you; regardless of how you use it though the VCA control ensures reliability and remarkably smooth performance. Expressiveness made easy tailor your dynamics with ease while keeping your hands free.

The Behringer FX600 Digital Multi-FX Pedal is a compact footswitch packed with a wide variety of effects. Thanks to these effects such as flanger chorus phaser delay tremolo and pitch shifter you are able to discover its tonal possibilities in order to find your own signature sound. The FX600 truly brings your sound to life with the 24-bit/40kHz resolution offering the purest performance possible. This pedal operates two ways using a 9V battery or using the Behringer PSU-SB DC power supply which is sold separately. Discover your style.

Digital stereo reverb effects pedal for electric guitar that is comparable to state-of-the-art studio processors and delivers 24-bit high-resolution stereo reverbs including Spring, Plate, Hall, Gate, Room and Modulate. It features dedicated Mode, Time, Tone and Level controls for awesome sound shaping, a status LED for effect on/off and battery check and a first-class electronic On/Off switch for signal integrity in bypass mode. Pedal runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included). Dimensions: 54 x 70 x 123 mm. Weight: 330 g.
Power Supply: Adapter
Made in: China
UK/EU Power supply included: No
Battery Detail: Al/Mn
Type: Reverb
Battery Operation: Yes…

NU-X Sculpture is a mini compressor pedal with professional performance. Sustain and level controls adjust the compression and output, whilst blend gives the ability to add back in some of the unaffected signal to give a more natural attack. Hold down the on/off pedal to switch between soft clip and clean compression modes. Perfect for long sustain chords and clean lead tones. Features: Adjustable sustain and level Blend control to feed in some natural attack Selectable soft clip and clean modes Requires 9V center negative DC Power Supply 75mA current draw (Not Supplied) Specifications: Power supply: 9Vdc centre-negative power adaptor required (not included) Current consumption: 100mA Controls: …

This well-built, real-feel pedal comes with a non-slip rubber plate — essential when performing on hardwood or slip-prone surfaces — and an extended cable (2.2 m) for stacked multi-keyboard setups. It is compatible with half-damper capable keyboards, and it can also serve as a standard pedal switch (for sustain, etc).
Type: Sustain Pedal;Half Damper
Type-A Connector: TRS 6,3 mm Jack
Polarity Switch: No
Compatible with: Universal
Colour: Black
Made in: Malaysia
Cable Length: 2,2 m
Original Colour by Producer: Black;Black

Passive footswitch pedal that allows plugging a single guitar into two amplifiers or plugging two guitars into a single amplifier, making it easy and convenient to create a rig with eminent flexibility and a variety of tone options. “A or B” and “A and B” switching options allow for greater versatility, while true hardwire bypass in the off position lets players retain their natural tone without interference or signal loss. Pedal features a durable metal chassis and switches that withstand onstage wear and tear, and LED illumination (requires 9 V battery or power source). Dimensions: 127 x 83 x 51 mm.
Number of Buttons: 2
Made in: China

Passive Cabinet Merger. The concept behind Palmer's Cab Merger may be very simple, but the unit fills an important gap! Have you ever wanted to connect two guitar cabinets to just one amplifier output? It's quite simple with the PCABM! In addition, you can choose parallel or series wiring. For instance, two 8 ohm cabinets can be connected for a total load of 4 ohms (parallel) or 16 ohms (in series). The device is entirely passive and does not affect tone in any way. Dimensions: 105 x 35 x 35 mm, weight: 0,13 kg
UK/EU Power supply included: No
Type: DI Box
Made in: Germany