Effects Pedals

Guitar Multi Effects Pedal / Pedal Design Foot Pedal / Effects Delay

Compressor / Pedal Design Foot Pedal

Mono volume pedal, perfect for use with passive instruments with a single, mono input/output. A separate tuner out is included, allowing you to mute the instrument output, while still sending signal to your tuner. A micro-taper switch behind the jack area, under the footplate, gives you two distinct volume swell rates, and the standard 250kΩ potentiometer works great with passive instruments. Features centerless, ground 1/2" diameter stainless steel main pivot shaft , tough long lasting Kevlar cable, stainless steel springs. Dimensions: 3.5" W x 10" L x2 3/8" H (89 x 254 x 60mm).
Inputs: Mono
Outputs: Tuner;Mono
UK/EU Power supply included: No
True Bypass: None
Made in: Malaysia
Type: Volume…

Distortion / Pedal Design Foot Pedal

Pedal Design Foot Pedal

Modulation / Pedal Design Foot Pedal

Guitar effect Stereo Digital Delay pedal. 6 delay types: Digital. Analog. Real Echo. Tape Echo. Tube Echo. Galaxy. 4 effect types: Normal. Mod. Dynamic. Reverse. Tap tempo footswitch. Footswitch for Delay on / Rec / Play. Integrated 20 sec. Looper. Preset mode: store one preset with favorite delay settings and recall it any time. Ping-Pong-Delay mode for alternating delay signal on the outputs. Controls for delay time, dry signal level, delay level, low cut, high cut and feedback. Tap Tempo LED indicates delay speed. Preset LED. Effects trail on/off switch (Trails On: Effect decays after deactivating pedal /w Buffered Bypass, Trails Off: No effect decay after deactivating pedal /w True Bypass).…

The JHS Pedals 3 Series Distortion is a massively versatile distortion pedal with the ability to achieve medium gain crunch, heavy overdrive, distortion, and even fuzz tones. The controls on the Distortion are Volume, Filter (or Tone), and Distort knobs that give you a wide range of usable sounds in any position. The Gain toggle gives you a choice between more saturated and compressed or a more open and crunchy distortion. This switch plays a big part in how the pedal responds to your playing and touch dynamics.
metal housing
6.3 mm mono in / output jacks
power supply via optional 9V DC adapter 2.1 x 5.5 mm barrel plug, polarity (-) center
battery operation: not supported
current draw: 9 mA
dimensions …

Distortion

Pedal Design Foot Pedal / Operation digital

The JHS Pedals 3 Series Overdrive offers a wide range of overdrive sounds within straightforward design aesthetics. You can achieve anything from boost, transparent low gain, to huge amp-like medium overdrive sounds. The simple knob functions give you control over the Volume, Body (or EQ), and Drive. The Gain toggle gives you a choice between more saturated and compressed or more open and crunchy dynamics. This switch plays a big part in how the pedal responds to your playing and touch as a player.
metal housing
6.3 mm mono in / output jacks
power supply via optional 9V DC adapter 2.1 x 5.5 mm barrel plug, polarity (-) center
battery operation: not supported
current draw: 12 mA
dimensions (L …

The JHS Pedals 3 Series Phaser is a versatile and easy to use six-stage phaser pedal inspired by the classic phaser circuits of the 1970s. It has all the standard phase tones you would expect from a good pedal, but because of its unique Blend control and Feedback toggle, you can achieve an even wider range of modern and experimental tones. The JHS Pedals 3 Series will inspire your playing and help you explore new sounds at a totally approachable price point.
metal housing
6.3 mm mono in / output jacks
power supply via optional 9V DC adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center
battery operation: not supported
current draw: 71 mA
dimensions (L x W x H): 112 x 60 x 31 mm
weight: ca. …

Pedal effect from TC Electronic. Tiny iconic reverb pedal returns better than ever with an innovative pressure-sensitive footswitch and new TonePrints. MASH footswitch gives you powerful effect-specific real-time parameter control. Next-generation reverb algorithms including the new spine tingling Shimmer reverb. Dedicated knobs for Decay, Tone and Mix let you fine tune your reverb easily. Beam all HALL OF FAME 2 reverbs into your pedal with the free TonePrint App. Craft your own reverbs and customize MASH functionality with free TonePrint Editor (PC, Mac, iPhone, Android and iPad). Simple, easy-to-use controls let you focus on playing. Works flawlessly with guitar and FX loop signals. Extra-small …

Analog Distortion Pedal for E-Guitar, Switch for Crunch Modus, 2 Status-LED, Works with 9V-Battery or Dunlop ECB-003 AC Adapter (optional not included), Control for Output, Tone and Distortion, Made in USA.,
Battery Operation: Yes
Outputs: Mono
Power Supply: Adapter or Battery
Made in: USA
Inputs: Mono
Battery Type: 9V
Controls: Tone;Distortion;Output
Type: Distortion
True Bypass: Yes
UK/EU Power supply included: No

Overdrive / Pedal Design Foot Pedal / Effects Overdrive

The JHS Pedals 3 Series Screamer is the beloved JHS TS 'Strong Mod', but in a brand-new stand-alone pedal. This pedal represents years of JHS Pedals playing around with the legendary TS-circuit and wanting to offer those changes in an affordable package. The Screamer offers more clean headroom, a better usability as a boost, more versatile drive and tone controls as well as a more pleasing frequency response than standard TS-style pedals. After years of hard work, this might be the most well-balanced TS-style pedal on earth!
Colour: White
Power Supply: Adapter;9V
Weight (g): 210.0
Depth (mm): 112.0
Package Contents: Manual
Number of Buttons: 1
Height (mm): 31.0
Controls: Drive;Switch;Tone;Volume<…

controls for sound output and distortion, True hardwire bypass, vintage tube amp distortion, operation with power supply or battery (not included), selected components, solid metal housing
Power Supply: Adapter or Battery
Battery Operation: Yes
Battery Type: 9V
Made in: USA
Type: Distortion
UK/EU Power supply included: No

Dual-Channel Guitar Preamp Faithfully Recreates the Sound of a 1965 JTM45 in a Pedal with Independent Channel Controls, Pre/Post Boost, Optional Cab Sim and Dedicated Outputs for DI and Headphones.At the heart of JIMS 45, AMPWORX modeling technology works its magic, carefully recreating the classic guitar tone that’s the sum of each and every component from the circuit of the original.The control layout is true to the original to not only give you authentic tone, but also a familiar look that makes you feel right at home. From this classic starting point, you can go classic, modern or just downright nuts. It’s all up to you how you want to tweak JIMS 45, but rest assured that no …

The JHS Pedals 3 Series Reverb is an extremely versatile unit that allows you to create the perfect amount of space for your guitar. You can achieve any reverberation effect, all the way from small room sounds to nearly endless washes of ambiance. The EQ lets you perfectly adjust for a bright or dark texture to the reverb's overall tone. The Pre-Delay toggle allows you to select a short delay before the reverb begins. This lets you explore effects ranging between slap-like singing in the shower sounds and spacey spring-like sounds.
metal housing
6,3mm mono in / output jacks
power supply via optional 9V DC adapter 2,1x5,5mm barrel plug, polarity (-) center
battery operation not supported
current &hellip;

The JHS Pedals 3 Series Fuzz is a versatile fuzz box that cleans up well with your guitar's volume knob. The Fuzz is the perfect balance of vintage and modern with soaring sustain and clear articulation. The controls allow you to create a wide variety of sounds via the Bias knob, which gives the Fuzz a more gated sound as you turn it up. Unlike many fuzz pedals, the fuzz knob is usable across 100% of the sweep for many different flavors not typically found in a fuzz, like distortion, and even pushed amp-style overdrive tones. The Fat toggle engages a bass boost for an overall fatter, more powerful sound.
metal housing
6,3mm mono in / output jacks
power supply via optional 9V DC adapter 2,1x5,&hellip;

1 input, bass, keyboards and even vocals, status LED, 1 output, metal switch, very solid cover, speed control, power with 9v battery, optional power supply
Battery Type: 9V
Power Supply: Adapter or Battery
Type: Phaser
Colour: Orange
Inputs: Jack 6,3 mm TS
Made in: USA
True Bypass: Yes
Number of Buttons: 2
Outputs: Jack 6,3 mm TS
Controls: Speed
Battery Operation: Yes
UK/EU Power supply included: No

Pedal Design Foot Pedal

Looper pedal effect suitable for guitar and bass guitar. The device allows 360-second recording in 11 storable, independent loops. It offers very simple control of record, overdub, undo-redo and erase functions using a footswitch. It also has a 24-bit digital converter, thanks to which it offers excellent sound quality and dynamics. The effect has a built-in one 1/4 "In or Out connector. An adapter is also included in the package.
UK/EU Power supply included: Yes
Controls: Loop;Level
SD Slot: No
USB: No
MIDI Interface: No
Built-in Effects: No
True Bypass: None
Type: Looper
Power Supply: Adapter
Outputs: Mono
Inputs: Mono
Made in: USA
Battery Operation: No…

Booster