Effects Pedals

Instrument Equipment Bag / Black / 0.18 kg / Foam Padding 8 mm

Custom moulded in the UK to fit the contours of the Boss 500 Series. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Boss 500 Series.
Compatible with: Boss 500 Series
Made in: United Kingdom
Type: Dust Cover

The TC PowerPlug 9 gives you 9 volts of TC approved power for use with your TC Electronic pedals including TonePrint PolyTune Ditto Loopers and analog drive pedals.

Fuzz/distortion effect pedal for guitars that recreates the gamut of famous fuzz tones from the 60’s and 70’s and offers switch for 3 different sound modes: Fuzz 1 (classic fuzz), Fuzz 2 (grunge) and gain Boost. It provides dedicated Gain, Bass, Treble and Level, controls, blue status LED for effect on/off and battery check and top-quality on/off switch that maintains incredible signal integrity in bypass mode. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g..
Power Supply: Adapter
Type: Fuzz
Made in: China
Battery Operation: Yes
UK/EU Power supply included: No

The Behringer PSU-HSB-ALL Power Adapter is designed for use with a wide variety of 9-volt devices including over 20 effects pedals at a time and keyboards. The adapter is supplied with 4 x assorted jumper cables and 2 x daisy-chain cables with 5 x connectors. With a transformerless design the PSU-HSB-ALL eliminates the 50/60-cycle hum and noise. The Behringer PSU-HSB-ALL features a 2-pin Euro plug and is designed for use with 220V - 240V sockets.

Kicking the ULTRA VIBRATO UV300 into action is like putting an invisible, automatic whammy bar on your guitar. From the gentle, pulsing rhythms of the ocean surf, to the wild, whirling effects of a rotating speaker system, the UV300 will bring a dose of days-gone- by to your sound. Select from Unlatch, Bypass or Latch modes and twist the dedicated Rise, Rate and Depth dials to create your ideal vibrato. In Latch mode, the effect is constantly on once you step on it. Unlatch mode only applies the effect while you press down on the pedal, so you can add vibrato to a single note if you like. Your guitar will be playing mind-games with everyone in earshot as familiar, but hardly ordinary, tones …

Analog bucket-brigade delay effect pedal for guitar with up to 300 ms of delay and optionally separate wet and dry outputs that provides true analog delay experience and vintage vibe of real slap-back echo. It features advanced noise reduction circuit that keeps the signal clean, dedicated Intensity, Echo and Repeat Rate controls for amazing sound shaping, status LED for effect on/off and battery check, dual output for running the direct and delayed signals to separate rigs, and first-class electronic on/off switch that offers noise-free operation. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
Battery Detail: Al/Mn
Type: Echo;Delay
Battery Operation: …

Tremolo effect pedal for electric guitar that offers the classic, warm and mind-bending tremolo effects of vintage ‘60s amps. It provides dedicated Rate, Wave and Depth controls for awesome sound shaping, features a status LED for effect on/off and battery check and a first-class electronic On/Off switch for highest signal integrity in bypass mode. Pedal runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included). Dimensions: 173 x 99 x 58 mm. Weight: 272 g.
Made in: China
UK/EU Power supply included: No
Type: Tremolo
Battery Operation: Yes
Power Supply: Adapter

Lets get it out the way this pedal sounds best cranked. Known as diming the controls the Behringer HM300 Heavy Metal Pedals circuit gained its legendary reputation by setting every control to 10 and letting the mayhem unfold. This gives the characteristic chainsaw-like buzzing distorted tone by pushing the circuit to extreme levels of clipping. This was the sound of Swedish death metal which is also the reason the original circuit has left such a significant legacy. If you need a distortion pedal to propel your tone to crushing new highs and deliver some of the most grinding textures available the HM300 supplies it in abundance.

Overdrive and distortion pedal for electric guitar that combines the overdrive and distortion effects for a wide range of tones, suitable for use with both single-coil and humbucker pickups. It features dedicated Level, Tone, Drive and Mode controls, status LED for effect on/off and battery check, and first-class noiseless electronic on/off switch that maintains excellent signal integrity in bypass mode. Pedal is equipped with 1/4" input and output, and can be powered by 9 V battery or PSU-SB DC power supply (not included). Dimensions: 54 x 70 x 122 mm. Weight: 330 g.
Made in: China
UK/EU Power supply included: No
Type: Distortion;Overdrive

Pedal Design Foot Pedal

Compact 7-band graphic equalizer pedal with wide frequency range from 50 Hz to 10 kHz for electric bass guitar that provides total shaping control over the tone and eliminates feedback. 7 frequency bands (50, 120, 400, 500, 800 Hz; 4.5, 10 kHz) with a 15 dB of Boost/Cut provide extensive tone-shaping options, while first-class electronic on/off switch ensures noise-free operation. Pedal also features status LED for effect on/off and battery check. It can be powered by 9 V battery or 9 V adapter PSU (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
UK/EU Power supply included: No
Battery Detail: Al/Mn
Type: Equalizer
Power Supply: Adapter
Battery Operation: Yes
Made in: China…

Stereo chorus guitar effect pedal that features dedicated Level, Tone, Rate and Depth controls for an incredible sound shaping. It also provides a status LED indicator for effect on/off and battery check, and a first-class electronic on/off switch that maintains incredible signal integrity in bypass mode. Pedal can be powered by either a 9 V battery or DC power supply (not included). Dimensions: 54 x 70 x 122 mm. Weight: ca 330 g.
Type: Chorus
Made in: China
Battery Operation: Yes
Power Supply: Adapter
UK/EU Power supply included: No

The Behringer HD300 Heavy Metal Distortion Effects Pedal gives you the tools to create high levels of crushing distortion and sustain with ease. Theres serious sustain on offer giving you the ability to get really sludgy crushing sounds with ease. The expanded 4-knob layout gives you total control over your tone with a dedicated Bottom knob perfect for optimising the pedal for lower tunings or 7+ string guitars. If you need to go heavier go with the HD300.

Pedal Design Foot Pedal

The Strymon 9V UK Power Supply can be used to power your Strymon effects pedal and any other 9V centre negative pedals. Offering up to 667mA the Power supply will make sure your pedal is running at maximum allowing you to use your pedal to the best of its ability. Its low noise operation and automatic worldwide voltage conversation Strymons official power supply is perfect as a replacement to keep your pedal going no matter where.

The Behringer TO800 Vintage Tube Overdrive pedal is a faithful recreation of that classic green overdrive. The inclusion of the defining 4558 op-amp chip is a nice nod to the original design along with the familiar 3-knob layout which both looks sleek and is remarkably easy to use. With these controls you can adjust the level of the effect adjust the tone and set how much gain youd prefer. This allows you to sculpt your tone however you see fit from a light boost to thick resonant overdrive. Whatever crunchy tone youre after the TO800 will deliver.

Robust 7-band EQ pedal for electric and electric-acoustic guitar that shapes the sound and eliminates unwanted feedback. Pedal offers a wide frequency range – from 100 Hz to 6.4 kHz, with a powerful 15 dB boost or cut of each EQ band. It is equipped with a first-class electronic on/off switch for highest signal integrity n bypass mode, and status LED for on/off and battery check. Powered by 9 V battery or the BEHRINGER PSU-SB DC power supply (not included). Dimensions: 54 x 70 x 123 mm. Weight: 330 g.
Type: Equalizer
Power Supply: Adapter
Battery Operation: Yes
Made in: China
UK/EU Power supply included: No

The Strymon Zuma Mounting Kit is the perfect solution for affixing your power supply in a discreet manner. It keeps your Zuma high current PSU stored underneath your PedalTrain board leaving more space for creative pedals up top! Please note: The Zuma Mounting Kit is not compatible with older model Pedaltrain boards (PT-1 PT-2 PT-JR) with holes on the rear brace instead of an open pass through for the length of the board. For those boards we recommend affixing Zuma to your board with Dual-Lock®.

Power Suply: Input: 100-240V ~ 50-60Hz / Output: 9V, 1.3APolarity: Center NegativeCompatible with DigiTech Whammy Pedal I, Whammy Pedal II, Whammy 4, Whammy 5, VHM5, MV5, GNX 1, VX 400, Vocalist Workstation, Vocalist Access, Vocalist VR, Vocalist Live 2, Vocalist Live 4, RP 3, S100, S400, RP 100 / 150 / 200 / 250 / 300 / 350, 500, RPx 400, Vocal 300, BP 200, Genesis 1, Jam Man Looper, Jam Man SoloXT Looper, Jam, Man Express XT Looper, Jam Man Stereo Looper, iStomp – 2,1 x 5,5 mm Barrel connector, negative center.
Made in: China
Voltage: 9V
Current (mA): 1300.0
Plug Type: Barrel
Polarity: Center Minus
Type: Power Supply

The Behringer UO300 Ultra Octaver Pedal gives you that extra cutting edge to your sound by adding up to two additional tones to your guitar. Offering notes that are either one to two octaves lower than the original sound packing in that extra punch. You can also adjust all three tones at any moment with intuitive and individual volume controls for each one which accompanies a switch that offers brilliant bass performance. With a performer friendly LED status light you can tell if the pedal is active wherever you are on stage.

Durable single piano-style footswitch pedal with natural feeling that is compatible with Yamaha, Roland, Kawai and Akai products. Its metal body is covered with thick black urethane bumper, and the long-frame design large rubberized footprint and substantial weight prevents sliding on most surfaces. 1.8 m long cable with 6.3 mm mono phone plug is included. Black and white colour combination.
Original Colour by Producer: Black;Black
Made in: China
Colour: Black
Compatible with: Roland;Yamaha;Kawai;Akai
Polarity Switch: No
Type-A Connector: Jack MONO 6,3 mm Male
Type: Sustain Pedal

D’Addario XPND Pedal Risers are designed to elevate pedals in those “tough to stomp” places. Mont the risers using the included hook and loop strips and raise any pedal a full inch, making it easy to access. You can align multiple risers across your board as needed, and with built-in-cut-outs for simple cable routing, adding risers is quick and hassle-free. XPND Pedal Risers are built to last and are available in single or double width, to accommodate dual-sized or multiple pedals.
Made in: Vietnam
Material: Aluminium
Variant: Large
Size: L
Colour: Black

The power supply 1 SPOT you can use anywhere in the world without a voltage converter because it automatically converts voltage worldwide. No need to worry about AC hum interfering with your sound either. the 1 SPOT is one of the quietest power sources. It is the 9V DC adapter that only takes up one spot on your power strip. With the ability to handle up to 1700mA, the 1 SPOT can power your entire pedalboard.
Power Supply: 9V;Adapter
Current: 1700 mA
Plug Type: Barrel
Colour: Black
Polarity: Center Minus
Voltage: 9V
Connector Angle: Straight
Type: Adapter
Made in: China
Variant: 1 SPOT
Current (mA): 1700.0
ChargerType: Power Supply…