Effects Pedals

Setting up amps, dialing in tones and positioning mics takes a lot of time and patience. Step on the amazing TUBE AMP MODELER TM300 and skip straight to the good part! The TM300 features authentic modeling technology for 3 classic guitar amps, 3 gain modes and 3 mic placements for a total of 27 configurations that let you easily achieve the most sought-after tube amp sounds – from clean to crunch to super-fat distortion.
Type: Tube Amp Modeler;Distortion;Equalizer
UK/EU Power supply included: No
Made in: China
Battery Operation: Yes
Power Supply: Adapter

The Behringer CS400 Compression and Sustain Ultimate Dynamics effects pedal is the perfect option for balancing your level. Ensuring that your quieter strikes ring with resonance while simultaneously reducing harsh loud tones. With intuitive controls for Level Tone Attack and Sustain you can fully personalise this stompbox tone to maximise its full potential. Utilising an active status LED you will always be able to tell when this pedal is enhancing your dynamics.

A distortion effect pedal. It has dense, tube-like distortion sound with an endless sustain. Its ideal for extreme hard rock or heavy metal sounds. The sound is adjusted using Distortion, Level potentiometers and a 3-band equalizer. In addition, it is equipped with a blue status LED, foot switch and ¼'' In/Out connectors. The effect is powered by a 9 V battery or adapter (not included).
Type: Overdrive;Distortion
Battery Operation: Yes
Made in: China
UK/EU Power supply included: No

A standard in pedal switches, with a medal body for durability. Use as a damper switch or as a control switch for functions such as start/stop. Attached cable.
Made in: Japan

Approved 12V DC/1000mA power supply with negative centre that is compatible with TC Electronic stompbox pedals.
UK/EU Power supply included: No
Power Supply: 240V
Current (mA): 1000.0
Made in: China
Number of Outputs: 1
Current: 701-1000 mA
Voltage: 12V
Plug Type: Barrel
Polarity: Center Minus
ChargerType: Power Supply

Passive Cabinet Merger. The concept behind Palmer's Cab Merger may be very simple, but the unit fills an important gap! Have you ever wanted to connect two guitar cabinets to just one amplifier output? It's quite simple with the PCABM! In addition, you can choose parallel or series wiring. For instance, two 8 ohm cabinets can be connected for a total load of 4 ohms (parallel) or 16 ohms (in series). The device is entirely passive and does not affect tone in any way. Dimensions: 105 x 35 x 35 mm, weight: 0,13 kg
Made in: Germany
Type: DI Box
UK/EU Power supply included: No

Stylish, lightweight, and durable, the CB-GT1 bag is the perfect solution for transporting the GT-1 Guitar Effects Processor and essential accessories. The rugged exterior and thick internal padding shield your gear from bumps and bruises, while a convenient shoulder strap and reinforced handle make carrying easy.
Made in: Vietnam
Waterproof: Yes
Strap: Shoulder Strap;Yes
Type: Pedal Bag
Padding: Yes
Colour: Black
Original Colour by Producer: Black;Black
Handle: Yes

Custom moulded in the UK to fit the contours of the Strymon Nightsky & Volante. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Strymon Nightsky & Volante.
Type: Dust Cover
Made in: United Kingdom
Compatible with: Strymon Nightsky / Volante

Custom moulded in the UK to fit the contours of the Headrush Mx5. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Headrush Mx5.
Compatible with: Headrush Mx5
Made in: United Kingdom
Type: Dust Cover

Compact and portable 3-button footswitch pedal for use with several DigiTech products, including The Jimi Hendrix Experience, The JamMan, or Expression Factory. Pedal provides increased functionality and convenient Hands-free control over up/down selection of Models, Mode changes, Loop selection, automatic Start/Stops, and auto record where applicable. It is equipped with durable metal chassis construction, one 1/4" input and 3 m stereo TRS cable.
Colour: Black
Power Supply: Passive
Number of Buttons: 3
Battery Operation: No
Type: Footswitch

The Behringer TU300 Chromatic Tuner is a necessity for any modern performer. Keeping your instrument at the correct tuning is essential to any performer and this makes that job a whole lot easier. Featuring a seven-segment LED indicator you can select between seven different tuning modes and an eleven-point stream meter can ensure the utmost precision at any moment. Whether you are on stage or in the studio this is the perfect companion for you.

The TC Helicon Singles Connect Kit is a cable set for connecting up to four vocal effects pedals together. With minimal cable clutter and simple usage the Singles Connect Kit is an essential audio and power accessory kit for the VoiceTone Single pedals. Including a 12V/1A power supply DC interconnect/daisy-chaining cables and three short XLR cables the Singles Connect Kit opens up a wide range of options for connecting your effects.

Bass Preamp / Pedal

Passive footswitch pedal that allows plugging a single guitar into two amplifiers or plugging two guitars into a single amplifier, making it easy and convenient to create a rig with eminent flexibility and a variety of tone options. “A or B” and “A and B” switching options allow for greater versatility, while true hardwire bypass in the off position lets players retain their natural tone without interference or signal loss. Pedal features a durable metal chassis and switches that withstand onstage wear and tear, and LED illumination (requires 9 V battery or power source). Dimensions: 127 x 83 x 51 mm.
Made in: China
Number of Buttons: 2

Sustain pedal for Casio keyboards, plastic
Original Colour by Producer: Black;Black
Cable Length: 1,7 m
Colour: Black
Type-A Connector: Jack MONO 6,3 mm Male
Polarity Switch: No
Type: Sustain Pedal
Compatible with: Universal
Made in: China

The JHS Pedals Red Remote External Switch is an expansion unit for use in conjunction with other JHD effects pedals. The Red Remote allows you to remotely activate the on-board toggle functions on the pedal itself. You can connect the remote with a standard 1/4 instrument cable expanding your tonal options and added an extra layer of versatility to your performance.

A case style gig bag, ideally suited for the Pedal Baby 100. This tough vinyl gig bag is zippered on three sides and comes with a shoulder strap. There’s a separate space for pedals and cables along with a zipped pocket on top so you can fit your entire rig in a case smaller than a laptop bag. Padding has been added to the inside to provide extra support for your valuable gear.
Original Colour by Producer: Black;Black
Type: Soft Case
Colour: Black
Made in: United Kingdom

Expression Pedal / Pedal Design Foot Pedal / Operation analogue

Pedal Design Foot Pedal

Get louder, get quieter, or get modulated with the outstanding FOOT CONTROLLER FCV100. This versatile pedal works equally well as a volume or modulation pedal – without tying up your hands or slowing down your performance.The FCV100 can accommodate two mono or one stereo instrument via its dual 1,4" Input jacks. By switching into Norm mode, the FCV100 is capable of controlling the volume of two individual instruments. In CV mode the FCV100 can control modulation and volume levels of other musical instruments by connecting Output 2 to the volume or modulation input of the instrument. In CV mode, when Output 2 is in use, Input/Output 1 can still be used for controlling the volume of another …

Pedal Design Foot Pedal

The Behringer ADI21 V-Tone Acoustic Preamp is designed to be used with guitars featuring piezo pickups and delivers a natural acoustic sound full of life. The acoustic preamp adds a richness to your overall acoustic performance and features an active direct injection box with proprietary mic emulation circuitry. A full three-band EQ and sweepable mids offer full tonal control whilst the blend control allows guitarists to mix their sound to reach their desired tones. The ADI21 is powered by a 9-volt battery or PSU-SB DC power supply (sold separately). If youre looking for a budget pedal which will vastly improve you live acoustic sound then look no further.

NU-X Sculpture is a mini compressor pedal with professional performance. Sustain and level controls adjust the compression and output, whilst blend gives the ability to add back in some of the unaffected signal to give a more natural attack. Hold down the on/off pedal to switch between soft clip and clean compression modes. Perfect for long sustain chords and clean lead tones. Features: Adjustable sustain and level Blend control to feed in some natural attack Selectable soft clip and clean modes Requires 9V center negative DC Power Supply 75mA current draw (Not Supplied) Specifications: Power supply: 9Vdc centre-negative power adaptor required (not included) Current consumption: 100mA Controls: …

This well-built, real-feel pedal comes with a non-slip rubber plate — essential when performing on hardwood or slip-prone surfaces — and an extended cable (2.2 m) for stacked multi-keyboard setups. It is compatible with half-damper capable keyboards, and it can also serve as a standard pedal switch (for sustain, etc).
Original Colour by Producer: Black;Black
Made in: Malaysia
Colour: Black
Type: Half Damper;Sustain Pedal
Type-A Connector: TRS 6,3 mm Jack
Cable Length: 2,2 m
Compatible with: Universal
Polarity Switch: No