Effects Pedals

The Tone Capture GTR pedal is based on Mooer’s unique EQ matching, non-linear IR technology, 'Tone Capture'. This pedal allows you to capture any guitar’s tone by sampling the unique tonal characteristics of the target guitar. This is achieved by comparing the differences between the guitar you want to use ('Source') and the guitar you want it to sound like ('Target'). A complex calculation then ensues and an uncanny digital recreation of your 'Target' guitar tone is born. The days of lugging around multiple guitars are over. The Tone Capture Guitar pedal opens up a variety of guitar sounds without the need to carry several guitars.
metal housing
6.3 mm mono in / output jacks
power …

Effect for electric guitar Amp in a Box/Preamp. Features Volume and Warm-bright switch. With a 30W power. In a solid mtetal box, powered by DC 24V, 2A DC power supply (center negative, included). Comes with a True bypass. Battery operation not supported. Dimension: 93 x 52 x 42 mm. Weight 160 g. In a red finish.
Package Contents: Adapter;Manual
UK/EU Power supply included: Yes
Made in: China
USB: No
MIDI Interface: No
Power Supply: Adapter;24 V
Type: Ampbox;Preamp
Battery Operation: No
True Bypass: Yes
Controls: Master;Warm/Bright

Guitar effect Distortion pedal. Vintage mode: warm and soft vintage distortion sound, Turbo mode: more than 2 x the output of the vintage mode for extreme distortion sounds. Metal housing. True Bypass. Power: optional 9V DC power supply. Dimensions: 93.5 mm (L) × 42 mm (W) × 52 mm (H), Weight: 160 g
Controls: Level;Filter;Distortion;Vintage/Turbo
Power Supply: Adapter;9V
UK/EU Power supply included: No
Made in: China
Inputs: Mono
True Bypass: Yes
Type: Distortion
Outputs: Mono

Guitar and Bass Dynamic Envelope Filter. Unique, funk filter sound, 2 modes (Clean/Fuzz). Metal housing. True Bypass. Power: optional 9V DC power supply. Dimensions: 93.5 mm (L) × 42 mm (W) × 52 mm (H), Weight: 160 g
Made in: China
Inputs: Mono
Type: Fuzz;Envelope Filter
True Bypass: Yes
UK/EU Power supply included: No
Outputs: Mono
Controls: Range;Fuzz/Clean;Intensity;Resonance
Power Supply: 9V;Adapter

Guitar effect Digital Chorus and Delay for Acoustic Guitar. The Baby Water is a chorus / delay pedal specially designed for acoustic guitar and other acoustic instruments with pickup, such as Ukuleles for example. It is styled like the previously presented Mooer Woodverb (Reverb for Acoustic Guitar). Controls for Level, Rate/Time, Depth/FB and Mode. 5 Modes available - Chorus, TRI-CH (triple chorus), ECHO, CH-DL (Chorus + Delay), DL-CH (chorus in the delay trails). Delay Time 50ms-1s. 6.35 mm mono IN/OUT jacks. Power supply optional 9V DC adapter 2.1 mm barrel plug polarity (-) center. Current draw 110mA. Dimensions (D x W x H) 93.5 mm x 42 mm x 52 mm. Weight 145 g
Controls: Rate/Time;Depth/FB;Selector;Level<&hellip;

Headphone amplifier for pedalboards. The new Mooer Audiofile is a professional headphone amplifier, specifically designed for use with guitar and bass pedalboards. It utilizes an analog Class A amplification circuit that secures the purity, warmth and wide dynamic range of the input signal from your instrument and effects pedals. The Audiofile can be used with either headphones (with mono or stereo input) or in front of your amp as a hi-fi signal booster. Its 100% true bypass and pristine sound will make it become a permanent resident on your pedalboard. Analog Class A amplification circuit, specifically designed for use with guitar and bass pedalboards, can also be used as high-fidelity booster,…

Acoustic guitar simulator pedal. Pedal offers 3 Working Modes: Piezo/Standard/Jumbo. Full metal shell. Very small and exquisite. True bypass.SpecificationsWorking Mode: 3 (Piezo/Standard/Jumbo)Input: 1/4” monaural jack (impedance: 1M Ohms)Output: 1/4” monaural jack (impedance: 1k Ohms)Power Requirements: AC adapter 9 V DC (center minus plug)Current Draw: 17 mADimensions: 93.5 mm (D) × 42 mm (W) × 52 mm (H)Weight:160 g.
Inputs: Mono
Made in: China
Controls: Top;Body;Level;Piezo/Standard/Jumbo
Power Supply: Adapter;9V
UK/EU Power supply included: No
Outputs: Mono
True Bypass: Yes
Type: Acoustic Simulator

The Mooer A7 Ambiance is a digital reverb pedal from the updated Micro Series. It is based on Mooer's unique reverb algorithm and features seven different reverb effects. With the special X control, you can change the space of reverb from a tiny plate to a huge hall or church. The built-in trail function can be switched between 'Infinite Trail' mode and traditional 'Trail On' mode, allowing users to explore more possibilities of reverb. The shimmering blue finish also adds a bit of sparkly flare to any pedal setup.
Made in: China
UK/EU Power supply included: No
Battery Operation: No
Type: Reverb
USB: Yes
Number of Presets: 7
Colour: Blue
Power Supply: Adapter;9V
Battery Detail: Al/Mn
True Bypass: …

Power to the pedals. The Mooer Wall 9V Pedal Power Supply offers you the means to fill your pedal with exactly what it needs - electricity. Coming with an EU plug it is perfect if you plan to take your gear to the continent or of course if you live there already. Whether you want to power a single pedal or daisy chain multiple pedals this power supply will happily deliver. With Mooers exceptional craftsmanship at its back it is perfect for the stage offering solid reliability and durability. You can count on it to deliver. *Please note: Picture is of UK version of product this product comes with EU plug*

Multi-power supply for effect pedals. 8 Outputs for 2.5 mm x 5.5 mm barrel plug. polarity (-) center. 1 x adjustable voltage (9V, 12V, 15V, 18V) @ 200 mA. 3 x independent 9V @ 200 mA each. 4 x parallel 9V @ 400 mA combined. Selectable AC voltage (110V~120V and 220V~240V) for usage in different regions. Includes fuses for both types of voltage. Status LED for each output. Over-current protection function. Dimensions: (L x W x H) 165 mm x 83 mm x 52 mm. Weight: 1.12 kg
UK/EU Power supply included: No
Made in: China
Battery Operation: No
Power Supply: 240V

Overdrive

Distortion