Effects Pedals

This well-built, real-feel pedal comes with a non-slip rubber plate — essential when performing on hardwood or slip-prone surfaces — and an extended cable (2.2 m) for stacked multi-keyboard setups. It is compatible with half-damper capable keyboards, and it can also serve as a standard pedal switch (for sustain, etc).
Made in: Malaysia
Type: Half Damper;Sustain Pedal
Original Colour by Producer: Black;Black
Type-A Connector: TRS 6,3 mm Jack
Colour: Black
Polarity Switch: No
Cable Length: 2,2 m
Compatible with: Universal

cable lenght 2m with 1/4" stereo plug, minimum volume knob, dimensions B x H x T in mm: 86 x 54 x 200, weight: 400g
Made in: China

The Palmer PW9V is a standard 9 volt power supply which can be used to power a range of electric guitar and bass effects pedals. With a maximum power consumption of 500 mA and lengthy cable of 1.50 metres the PW9V is the perfect addition to your set up as it allows you to save money on 9 volt batteries.

Portable guitar preamp. Delivers an extended range of authentic tube amplifier tones from high headroom ultra clean to maxed out high gain distortion. With 3-position selector switches for amplifier design, gain structure and loudspeaker miking simulation the MK 2's hot rodded circuitry lets you easily configure vintage and modern sounds as well as your own while high performance op amps provide superior S/N ratio. Offers balanced XLR and unbalanced 6.35 mm outputs in addition to 3.5 mm AUX input and headphones jacks. Controls include mic position, mode, Treble, amp select, Bass, Drive, Gain, ground lift, level. Robust steel housing. Powered by 9 V DC power supply (not included) or 9 V block.…

Universal pedalboard made from aluminium, for the storage of all commercially available floor effects. The cross bars (covered with Velcro), height and the tilt of the Pedalboard can be individually adjusted. Power supplies can be mounted below the board. Dimensions: 800 x 390 x 70-85 mm. Weight Pedalbay: 6.88 kg. Accessories (included): 2x black elastic bands, approx. 5 m hook tape, soft carrying case with shoulder strap, allen key.
Original Colour by Producer: Black;Black
Made in: Germany
Type: Pedalboard
Colour: Black

Soft carrying case with shoulder strap, padded. Dimensions: 800 x 390 x 85 mm. In a black finish.
Colour: Black
Padding: Yes
Original Colour by Producer: Black;Black
Made in: Germany
Type: Pedal Bag

Universal pedalboard made from aluminium, for the storage of all commercially available floor effects. The cross bars (covered with Velcro), height and the tilt of the Pedalboard can be individually adjusted. Power supplies can be mounted below the board. Dimensions: 600 x 390 x 70-85 mm. Weight Pedalbay: 5,15 kg. Accessories (included): 2x black elastic bands, approx. 3,5 m hook tape, soft carrying case with shoulder strap, allen key.
Colour: Black
Original Colour by Producer: Black;Black
Made in: Germany
Type: Pedalboard

Universal pedalboard made from aluminium, for the storage of all commercially available floor effects. The cross bars (covered with Velcro), height and the tilt of the Pedalboard can be individually adjusted. Power supplies can be mounted below the board. Dimensions: 605 x 305 x 70-85 mm. Weight Pedalbay: 4,62 kg. Accessories (included): 2x black elastic bands, approx. 3m hook tape, soft carrying case with shoulder strap, allen key.
Type: Pedalboard
Original Colour by Producer: Black;Black
Colour: Black
Made in: Germany

Soft carrying case with shoulder strap, padded. Dimensions: 600 x 390 x 85 mm. In a black finish.
Type: Pedal Bag
Original Colour by Producer: Black;Black
Colour: Black
Padding: Yes
Made in: Germany

Soft carrying case with shoulder strap, padded. Dimensions: 605 x 305 x 85 mm. In a black finish.
Made in: Germany
Original Colour by Producer: Black;Black
Type: Pedal Bag
Padding: Yes
Colour: Black

Universal pedalboard made from aluminium, for the storage of all commercially available floor effects. The cross bars (covered with Velcro), height and the tilt of the Pedalboard can be individually adjusted. Power supplies can be mounted below the board. Dimensions: 500 x 135 x 35 mm. Weight Pedalbay: 2,46 kg. Accessories (included): 2x black elastic bands, approx. 1.5m hook tape, soft carrying case with shoulder strap.
Original Colour by Producer: Black;Black
Made in: Germany
Type: Pedalboard
Colour: Black

Universal pedalboard made from aluminium, for the storage of all commercially available floor effects. The cross bars (covered with Velcro), height and the tilt of the Pedalboard can be individually adjusted. Power supplies can be mounted below the board. Dimensions: 450x 305x 70-85mm. Weight Pedalbay: 3.8 kg. Accessories (included): 2x black elastic bands, approx. 2.5m hook tape, soft carrying case with shoulder strap, allen key.
Original Colour by Producer: Black;Black
Colour: Black
Made in: Germany
Type: Pedalboard

Soft carrying case with shoulder strap, padded. Dimensions: 450 x 305 x 85 mm. In a black finish.
Type: Pedal Bag
Colour: Black
Padding: Yes
Original Colour by Producer: Black;Black
Made in: Germany

Passive Cabinet Merger. The concept behind Palmer's Cab Merger may be very simple, but the unit fills an important gap! Have you ever wanted to connect two guitar cabinets to just one amplifier output? It's quite simple with the PCABM! In addition, you can choose parallel or series wiring. For instance, two 8 ohm cabinets can be connected for a total load of 4 ohms (parallel) or 16 ohms (in series). The device is entirely passive and does not affect tone in any way. Dimensions: 105 x 35 x 35 mm, weight: 0,13 kg
UK/EU Power supply included: No
Made in: Germany
Type: DI Box

The Palmer Hook and Loop Fastener is a 1 metre strip of self-adhesive tape which is perfect for mounting devices on pedal boards.

It may be designed for electric guitars but the Palmer Duetto Nano Mixer can do much much more!