Car Jacks

Fitted with overload valve. Dual-stage rams allow for longer travel. Lower retracted and higher extended heights. Base and reservoir machine welded for increased strength and eliminates leakage. Supplied with 3-piece handle. Features & Benefits: • Fitted with overload valve. • Dual-stage rams allow for longer travel. • Stage 1 capacity 7500kg. • Stage 2 capacity 4000kg. • Lower retracted and higher extended heights. • Base and reservoir machine welded for increased strength and eliminates leakage. • Supplied with 3-piece handle. • Model No. SJ4T Specifications: Model No SJT4 Brand: Sealey Capacity: 4 Tonne Hydraulic Lift: 170mm Maximum Height: 390mm Minimum Height: 160mm Nett Weight: 6.4…

Base and reservoir machine welded for increased strength and reduced chance of leakage. Fitted with overload valve. Supplied with 2-piece handle. Fitted with carrying handle. Features & Benefits: • Min./Max. Height: 280/450mm. • Fitted with overload valve. • Base and reservoir machine welded. • Supplied with 2-piece handle. • Fitted with carrying handle. • Model No. SJ50 Specifications: Model No SJ50 Brand: Sealey Capacity: 50 Tonne Hydraulic Lift: 170mm Maximum Height: 450mm Minimum Height: 280mm Nett Weight: 25.8kg Screw Extension: n/a

Trolley Jack / Max Load 2 t / Hubhöhe 505 mm / Unterfahrhöhe 75 mm / 32.5 kg / Cushions / Lifting Positions 6

Twin-piston, quick lift facility - just six pumps to reach maximum height
Lifting range 100-465mm
Integrated rubber saddle pad prevents damage to underside of vehicle
EVA foam handle to prevent panel damage
Knurled handle for extra grip
Twin safety overload valves
Rear swivelling castors
Manufactured to EN 1494 Specification
Draper 12 months parts and labour warranty

Replacement hydraulic ram for PH20.V4 engine crane. Features & Benefits: • Replacement hydraulic ram for PH20.V4 engine crane. • Model No. PH20.V4-E Specifications: Model No PH20.V4-E Brand: Sealey Nett Weight: 11.8kg Ram Capacity: 8000kg Ram Diameter: 33.9mm Ram Travel: 502mm Pump Type: Single Speed Ram Pin Hole Diameter: 16.4mm Clevis Pin Hole Diameter: 16.4mm Mounting Point Distance (Min.): 636mm Overall Length (Min.): 670mm Base mount Type: Double Clevis

Expert Quality, polyester webbing, 60mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 2000kg for a load at one end (straight configuration) and 4000kg for a load between the loop eyes ('U' configuration). Manufactured to BS EN1492 Contents: 1 x Wide Load Sling, 3m x 60mm, 2 Tonne

Designed for the jacking points to protect and prevent damage to side skirts and battery. Made from high quality rubber, providing a sturdy and durable point of contact. Features a rubber O-ring on the spigot, creating a secure fit to the vehicle. Features & Benefits: • Designed for the jacking points to protect and prevent damage to side skirts and battery. • Made from high quality rubber, providing a sturdy and durable point of contact. • Features a rubber O-ring on the spigot, creating a secure fit to the vehicle. • Model No. JPT4 Specifications: Model No JPT4 Application(s): Suitable for Models S and X Brand: Sealey Nett Weight: 0.72kg

Two welded steel wheel chocks. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Suitable for heavy goods vehicles. Features & Benefits: • Two welded steel wheel chocks. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. • Suitable for heavy goods vehicles. • Model No. WC05

A pair of extensions for use on car ramps stock No.s 23216 and 23302.

Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are softer than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 2 tonne x 3 metre

The Sealey JKIT01 Lifting Kit features a Jack, Axle Stands, Creeper, Chocks & Wrench The Sealey JKIT01 offers a 5 piece lifting kit for the DIY mechanic consisting of Jack, Axle Stands, Creeper, Chocks & Wrench. Suitable for working on vehicles up to 2 tonne in weight.  Features:  
- Folding wheel chocks (x2) 
- L-bar wrench with 17 & 19mm socket  
- 1 tonne axle stands (x2) have a combined weight capacity of 2 tonne 
- 2 tonne trolley jack with short wheel base has a lifting range of 140mm to 340mm 
- Padded car creeper with 6 castors allows for comfort whilst carrying out under car maintenance  Specification: 
- Model No: JKIT01 
- Jack Specification:
- Weight: 8.7kg  …

Expert Quality, polyester webbing, 150mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 5000kg for a load at one end (straight configuration) and 10,000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.