Car Jacks

For repairs and maintenance. Suitable for most standard cars. Platform height 200mm; platform width 205mm approx. Extensions are available to lower the angle for low ground clearance vehicles Stock No 23306. Contents: 1 x Car Ramps, 2.5 Tonne (Pair)

Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are softer than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 2 tonne x 2 metre

Suitable for supporting large multi-cylinder engines (maximum weight 75kg). Features fully adjustable mounting arms and swivel castors. Supports can rotate for accessibility to all parts of the engine. Features & Benefits: • Suitable for supporting large multi-cylinder engines (maximum weight 75kg). • The supports can swivel for accessibility to all parts of the engine. • Width, height and length adjustable. • Capacity: 75kg. • Model No. MES02 Specifications: Model No MES02 Brand: Sealey Capacity: 75kg Engine Support Span: 130-370mm Height: Min./Max. 540/795mm Minimum/Maximum Length: 580-900mm Nett Weight: 10.42kg Width: Engine Mounting Brackets; Min./Max.150-360mm

Expert Quality, polyester webbing, 150mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 5000kg for a load at one end (straight configuration) and 10,000kg for a load between the loop eyes ('U' configuration). Manufactured to BS EN1492 Contents: 1 x Wide Load Sling, 4m x 150mm, 5 Tonne

Replacement hydraulic ram for SPC1000 engine crane. Features & Benefits: • Replacement hydraulic ram for SPC1000 engine crane. • Model No. SPC1000.28 Specifications: Model No SPC1000.28 Brand: Sealey Nett Weight: 13kg Ram Capacity: 5000kg Ram Diameter: 31.92mm Ram Travel: 585mm Pump Type: Twin Speed Ram Pin Hole Diameter: 18.0mm Clevis Pin Hole Diameter: 27.5mm* Mounting Point Distance (Min.): 706mm** Overall Length (Min): 763mm Base Mount Type: Spigot Mounted * Internal diameter of spigot mount ** From base plane to ram pin centre

Expert Quality, polyester webbing, 50mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 1000kg for a load at one end (straight configuration) and 2000kg for a load between the loop eyes ('U' configuration). Manufactured to BS EN1492 1+A1 Contents: 1 x Load Sling Wide, 5m x 50mm, 1 Tonne

Designed to prevent damage to the underside of the vehicle's jacking point. Design Type A. Profile Depth 27mm. Size 118.5mm Square. Fits saddle 100-106mm.

Fully adjustable saddle with forward, backward and side-to-side tilt. Suitable for Model No's. 300TR, 300TRQ, 600TR, 600TRQ. Features & Benefits: • A fully adjustable saddle with forward, backward and side-to-side tilt. • Suitable for Model No's. 300TR, 300TRQ, 600TR, 600TRQ. • Note: When using these adjustable supports the maximum capacity of the jack and support combination will be limited to the lowest specified capacity in the combination. e.g. 600TR and ADT3 - Maximum capacity is 500kg. • Model No. ADT3 Specifications: Model No ADT3 Brand: Sealey Capacity: 500kg Compatibility: 300TR, 300TRQ, 600TR, 600TRQ Nett Weight: 10.82kg

Package includes: Model Number - Description TD284SD - Ratchet Tie Down 25mm x 4m Polyester Webbing with S-Hooks 800kg Breaking Strain TDMCHB - Tie Down - Motorcycle Handlebar TDMCRW - Tie Down - Motorcycle Rear Wheel WCR02 - Tie Down - Motorcycle Roll-in Wheel Clamp - Bolt Down Features & Benefits: Package includes: • Model Number - Description • TD284SD - 25mm x 4m Polyester Webbing Ratchet Tie Down with S-Hooks 800kg Breaking Strength • TDMCHB - Tie Down - Motorcycle Handlebar • TDMCRW - Tie Down - Motorcycle Rear Wheel • WCR02 - Tie Down - Motorcycle Roll-in Wheel Clamp - Bolt Down • Model No. MTC01 Specifications: Model No MTC01 Brand: Sealey

Heavy-duty axle stands to safely support vehicles for extended periods of time. Large crutches for good load distribution. The heavy gauge steel frame and welded construction gives superior strength and safety. All stands feature captive, multi-position pin load support. Sold in pairs. Features & Benefits: • Min./Max. Working Height: 369/571mm. • Capacity: 12 Tonne per pair. • Sturdy welded steel construction. • Captive pin load support. • Range available in five different colours. • Sold in pairs. • 3 Year Guarantee*. • Model No. AS6 Specifications: Model No AS6 Brand: Premier Capacity Each: 6 Tonne Capacity Pair: 12 Tonne Maximum Working Height: 571mm Minimum Working Height: 369mm Nett Weigh…