Power Saws

• HSS Air saw blades suitable for Sealey and other leading makes of air saw.• Supplied in a pack of 15.HSS Air saw blades suitable for Sealey and other leading makes of air saw. Supplied in a pack of 15.Technical Specification:Application(s): S01045, SA1006, SA34, SA342, SA347, GSA345Blade Pitch: 24tpiNett Weight: 0.06kgPack Qty: 15Dimensions: Length: 10mm x Height: 186mmWeight: 0.065KgWarranty: Consumable

• HSS Air saw blades suitable for Sealey and other leading makes of air saw.• Supplied in a pack of 15.HSS Air saw blades suitable for Sealey and other leading makes of air saw. Supplied in a pack of 15.Technical Specification:Application(s): S01045, SA1006, SA34, SA342, SA347, GSA345Blade Pitch: 32tpiNett Weight: 0.06kgPack Qty: 15Dimensions: Length: 235mm x Height: 3mmWeight: 0.066KgWarranty: Consumable

• HSS Air saw blades suitable for Sealey and other leading makes of air saw.• Contents: 14tpi Saw Blades (x3), 24tpi Saw Blades (x9), 32tpi Saw Blades (x3).• Supplied in a pack of 15.HSS Air saw blades suitable for Sealey and other leading makes of air saw. Contents: 14tpi Saw Blades (x3), 24tpi Saw Blades (x9), 32tpi Saw Blades (x3). Supplied in a pack of 15.Technical Specification:Application(s): S01045, SA1006, SA34, SA342, SA347, GSA345Blade Pitch: 14tpi (x3), 24tpi (x9), 32tpi (x3)Nett Weight: 0.06kgPack Qty: 15Dimensions: Length: 10mm x Height: 190mmWeight: 0.065KgWarranty: Consumable

The Hole Cutter is easy to handle, making it ideal for laying airing and ventilation pipes and also for installing switch and junction boxes. It is available in various diameters and comes with arbour and pilot drill bits. A mixture of coarse and medium cutting teeth provides a fast drilling rate and smooth work results. Use the cutter when working with hard and soft wood, veneered wood, laminated chipboard and plastics6-piece hole cutter setHardened, medium cut teeth. With the appropriate cooling, also suitable for cutting non-ferrous metals such as aluminium and copper. Hex shank firmly bound to the body. This ensures sturdiness and optimum true running. Working length 32 mm• Easy to …

Lasts up to 50x longer than a BiMetal hole saw in tough materialsMost hole saws for wood and metal seem to work fine - until you hit a hardened nail or screw. Then they scream and smoke and grind until their teeth are torn off, and you still only have half a hole. With its carbide teeth, the Expert Tough Material barely slows down when it hits metal – it cuts neatly through and keeps on cutting holes, time and again.Made with Bosch Carbide Technology, each tooth is an optimum grade of the hardest metal, laser welded and ground six times for the perfect cutting shape. This makes the Bosch Expert Tough Material Hole Saw ideal for tough jobs and all-round trades work: As well as wood and metal, i…

Lasts up to 50x longer than HCS hole saw in tough materialsCutting holes in brick, soft tiles and drywall is essential for plumbers and electricians on a building site or during renovation work. Few hole saws can withstand this kind of work in a mixture of tough construction materials, but the Expert Construction Material can. This one hole saw serves, and lasts, for many jobs.With just a few huge carbide teeth on its steel body, the Expert Construction Material delivers a real bite. Its large slots are optimised for fast chip removal, so it eats through anything from brick to wood and particle boards, fast. Bosch Carbide Technology is an optimum mix of the hardest metals, and ensures an extremely …

The bi-metal Hole Saw fits all standard adapters on the market. The bi-metal Hole Saw offers smooth cutting through various materials. The tooth configuration (Vario tooth strip) is ideal for gliding through material to provide smooth cuts. Made of bi-metal HSS (high-speed steel) containing 8% cobalt alloy, this hole saw has less risk of tooth breakage and higher heat resistance for long-lasting cutting. Use this hole saw when cutting through wood, metal and plastics • Smooth Cutting • Bi-metal Hole Saw offers smooth cutting through various materials • Tooth configuration (Vario tooth strip) is ideal for gliding through material to provide smooth cuts • Made of bi-metal …

Features: Features a range of accessories and variable pitch bi-metal hole saws, suitable for cutting steel, brass, bronze, cast iron, aluminium, wood and plastics 35mm cutting depth Durable M3 steel cutting teeth 2 x hexagonal shank hole saw arbors Supplied inside a heavy-duty blow moulded storage case Specifications: Dimensions: H:24.5 x W:8.5 x D:8.5 cm Colour: Blue And Black Guarantee:Consumable Warranty Material: Blend Model Number: 99325

The CorePlus Diamond Holesaw provides professional, fast, clean cutting on a wide range of materials, from hard porcelain tile and stone to cement board and fibreglass. Leading-edge vacuum brazing technology ensures the diamonds stay bonded for extremely long life. Minimal water cooling is required when cutting hard tile, stone and glass. Use fully dry on other materials. Fluid, snag-free cutting, no secondary finishing required. The ultra-thin kerf generates a low amount of torque for faster cutting and extended battery life. Use with an arbor on a cordless drill or with an adaptor nut on an angle grinder.1 x CorePlus DMPHS51 Diamond Holesaw 51mm.Additional Information:• Size: 51mm• …

This Priory 400 Tank Cutter, for Hand Brace/Drill Stand, has a straight shank with 3 flats upon it to ensure a positive drive when used in 3 jaw chuck. The 400 is suitable for use in a handheld brace or drill stand, and the cutting blade is manufactured from heat-treated high-speed steel.The tank cutter has a high-speed steel pilot drill and is suitable for use on most tank materials. Specifications: Capacity: 25 - 125mm (1-5 in).Shank: Straight.Cutter: H.S.S.Additional Information:• Type: Cutter• Size: 25 to 125mm

Rotabroach mini cutters are designed for use in standard drill chucks and deliver clean, burr-free holes with minimum power consumption, making them ideal for use with cordless machines. Sizes 6mm to 20mm are suitable for use in 3/8" or 1/2" drill chucks. Sizes 21mm and above are suitable for 1/2" drill chucks only. For information on the arbor & pilot drill assembly needed for your requirements, please see the attached PDF below. Complete kits are also available (RK604 and RK603) Features & Benefits • Rotabroach Mini Cutters cut clean, burr-free holes in seconds • The professional solution for cutting holes in sheet metal, pipes and plastics • Precision ground teeth and flutes …

Rotabroach mini cutters are designed for use in standard drill chucks and deliver clean, burr-free holes with minimum power consumption, making them ideal for use with cordless machines. Sizes 6mm to 20mm are suitable for use in 3/8" or 1/2" drill chucks. Sizes 21mm and above are suitable for 1/2" drill chucks only. For information on the arbor & pilot drill assembly needed for your requirements, please see the attached PDF below. Complete kits are also available (RK604 and RK603) Features & Benefits • Rotabroach Mini Cutters cut clean, burr-free holes in seconds • The professional solution for cutting holes in sheet metal, pipes and plastics • Precision ground teeth and flutes …

High performance hole saws for drilling small diameter holes in non-metallics. The ideal solution for the toughest cutting situations. Featuring a diamond coated cutting edge permanently bonded to a tough steel body, the Starrett Diamond Grit hole saw provides the necessary clearance for cutting at high speeds. Rapid cutting solution for non-metallics. Small diameter hole saws are perfect for kitchen and bathroom installations. Smooth surface finish, ideal when cutting glass and ceramics. Supported by a comprehensive range of arbors with carbide tipped pilot drills. The ultimate hole saw for hard-to-cut materialsTeeth Type: Synthetic diamond gritCountry of Origin: CN Specifications: Diameter …

The strong, high performance triple chip Tungsten Carbide Tipped hole saw provides long life when cutting difficult and abrasive materials, such as wood and PVC. It offers a cost effective solution for cutting through nail embedded wood, or virtually any wood and metal combination, reinforced concrete and fibreglass. Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster. Tungsten Carbide Tipped teeth for outstanding cutting performance and product durability. Will cut nail embedded wood or virtually and wood and metal combination, such as wooden doors with metal fascia panels. Cutting depth of 41mm (1.5/8""). Suitable for use …