Power Saws

The strong, high performance triple chip Tungsten Carbide Tipped hole saw provides long life when cutting difficult and abrasive materials, such as wood and PVC. It offers a cost effective solution for cutting through nail embedded wood, or virtually any wood and metal combination, reinforced concrete and fibreglass. Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster. Tungsten Carbide Tipped teeth for outstanding cutting performance and product durability. Will cut nail embedded wood or virtually and wood and metal combination, such as wooden doors with metal fascia panels. Cutting depth of 41mm (1.5/8""). Suitable for use …

High performance hole saws for drilling small diameter holes in non-metallics. The ideal solution for the toughest cutting situations. Featuring a diamond coated cutting edge permanently bonded to a tough steel body, the Starrett Diamond Grit hole saw provides the necessary clearance for cutting at high speeds. Rapid cutting solution for non-metallics. Small diameter hole saws are perfect for kitchen and bathroom installations. Smooth surface finish, ideal when cutting glass and ceramics. Supported by a comprehensive range of arbors with carbide tipped pilot drills. The ultimate hole saw for hard-to-cut materialsTeeth Type: Synthetic diamond gritCountry of Origin: CN Specifications: Diameter …

Ideal for cutting stainless and high alloy steels, non-ferrous light metals and reinforced fabrics, all at a much faster speeds than bi-metal hole saws. Perfect for production cutting and particularly suitable for use in drills with limited speed control.• Split-point drill for faster penetration and self-centring • Ideal for production cutting, and particularly suitable for use in drills with limited speed control • Fitted with ejector spring for easy core removal • Step drill for faster cuts in thinner materials • Tungsten carbide tipped teeth provide superb product life and cutting performance • Safety stop at the base of the hole saw prevents drilling beyond the maximum cutting depth of 13m…

The RemGrit® Holesaw is a carbide grit edged holesaw designed to cut extremely hard or abrasive materials including ceramic tiles, laminates, MDF, marble,slate, glass fibre and virtually any material that does not form a chip. It cuts cast iron, ceramic tiles, laminates, composition board, marble, slate, glass fibre, asbestos. Totally interchangeable with all other American Pattern Holesaws. Maximum Cutting Depth: 29mm.Disston G052 Remgrit Holesaw 83mmAdditional Information:• Size: 83mm• Material: Carbide Grit

Lenox Diamond hole saws are designed to cut more holes in less time. They are durable and long lasting, with oversized slots for quick removal of waste material. Specifications • Diameter: 38mm • Compatible Arbors: 1L, 4L, 5LFeatures & Benefits• Brazed edge lasts longer in tiles and stone • Robust design for greater durability in tough applications • Low torque, little pressure required • Oversized slots for easy plug removalContents• Hole Saw only • No Arbor or Pilot Drill (see specifications for compatible arbors)

Rotabroach mini cutters are designed for use in standard drill chucks and deliver clean, burr-free holes with minimum power consumption, making them ideal for use with cordless machines. Sizes 6mm to 20mm are suitable for use in 3/8" or 1/2" drill chucks. Sizes 21mm and above are suitable for 1/2" drill chucks only. For information on the arbor & pilot drill assembly needed for your requirements, please see the attached PDF below. Complete kits are also available (RK604 and RK603) Features & Benefits • Rotabroach Mini Cutters cut clean, burr-free holes in seconds • The professional solution for cutting holes in sheet metal, pipes and plastics • Precision ground teeth and flutes …

HSS Cobalt Hole Saw 76mm 3in~ Premium grade 8 % Cobalt alloy steel construction for an extended working life~ Excellent wear resistance even at high temperatures~ For fast and clean cutting of metal, wood, aluminium, steel, cast iron, brass and plastics~ Variable pitch teeth for rapid cutting action, efficient swarf removal and reduced vibrationTechnical Specification:CE Certified: NoConflict Materials Content : NoREACH Content Status SVHC Free or Contains SVHC: SVHC freeRoSH Regs Within Scope: NoBatteries Included: NoBattery Powered: NoCharger Included: NoMains Powered: NoHealth and Safety Text: Users and bystanders are advised to wear safety gogglesDimensions: Length: 76mm x Height: 43mmWeight: …

Bahco Superior™ Multi Construction Holesaws have carbide tips and are capable of cutting through brick and ceramic tiles, laminate, fibreglass and hardwood. The tooth tips consist of a carbide round rod which is fusion welded to the back material, the tip is then ground to its final shape with a 5° positive cutting angle. They have a low friction coating that minimises heat generation and wide gullets for effective chip removal. They fit all power drills, both stationary and portable.Bahco Multi Construction Holesaw 3833-73-C Carded Size: 73mm.Additional Information:• Size: 73mm• Material: TCT

Faithfull Bi-Metal Cobalt Holesaws with precision set teeth for aggressive material penetration and swarf clearance. This also provides a smooth, fast cutting action. Manufactured from bi-metal material with a 8% cobalt content for increased heat and wear resisitance for greater product life. Will cut thin and thick guage materials. Ideal for use on a wide variety of materials including: stainless steel, steel, aluminium, sheet metal, mild metal, non-ferrous metals, cast iron, soft/hard wood and PVC. Suitable for use in most variable speed power drills. Specification Cutting Depth: 38mmDiameter: 160mmAdditional Information:• Size: 160mm• Material: Bi-Metal

The Footprint Tenon Saw is traditionally used for cutting tenon joints and other detailed sawing requirements. Made from high quality spring alloy steel, the blade can be re-sharpened time and time again. The teeth have been precision ground and set to ensure a clean cut. A heavy-duty brass back provides rigidity and support to the blade, giving a great cutting feel. The handle is made from an attractive two tone lacquered beechwood. It is of a traditional design providing superb comfort and strength adding to the feel and balance of the saw. Three brass screws securely fit the handle to the saw blade. Made in Sheffield, England.Footprint 256 Brass Back Tenon Saw has the following specification: …

Lasts up to 50x longer than HCS hole saw in tough materialsCutting holes in brick, soft tiles and drywall is essential for plumbers and electricians on a building site or during renovation work. Few hole saws can withstand this kind of work in a mixture of tough construction materials, but the Expert Construction Material can. This one hole saw serves, and lasts, for many jobs.With just a few huge carbide teeth on its steel body, the Expert Construction Material delivers a real bite. Its large slots are optimised for fast chip removal, so it eats through anything from brick to wood and particle boards, fast. Bosch Carbide Technology is an optimum mix of the hardest metals, and ensures an extremely …

Milwaukee Bi-Metal Contractors Holesaw features an optimised variable 4-6 tooth geometry for faster cutting and universal use. Bi-Metal teeth for best durability and increased wear resistance. For universal use with steel, non ferrous metals, wood, drywall plasterboard and plastics. Specifications • Diameter: 121mm • Cutting Depth: 38mmFeatures & Benefits• Optimised variable 4-6 tooth geometry for faster cutting • Bi-Metal teeth for best durability and increased wear resistance • For universal use: steel, non ferrous metals, wood, drywall plasterboard, plastics

It is suitable for use with all corded and cordless drill drivers. The BiM Progressor Hole Saw offers 2x longer lifetime than its predecessor. It has been redesigned with Bosch Bi-Metal with 8% cobalt alloy for increased durability. Additionally, it has an enhanced progressive tooth strip that enables faster cuts. Use this hole saw when drilling holes in wood, drywall, plastics, metal, non-ferrous metal and stainless steel. BIM Progressor Hole Saw offers 2x longer lifetime than predecessor • 2x Longer Lifetime Than Predecessor • BiM Progressor Hole Saw offers 2x longer lifetime than predecessor • Redesigned with Bi-Metal with 8% cobalt alloy for increased durability • Enhanced …