Power Saws

Starrett Diamond Coated Hole Saw 68mm D0096

Delivery: to United Kingdom

Report

250mm diameter sawblade 60 teeth.

from £53.95

ALM Replacement Lo-Kick Chain 3/8" x 45 Links for 30cm Chainsaws 300mm CH0

High performance hole saws for drilling small diameter holes in non-metallics. The ideal solution for the toughest cutting situations. Featuring a diamond coated cutting edge permanently bonded to a t more→ough steel body, the Starrett Diamond Grit hole saw provides the necessary clearance for cutting at high speeds. Rapid cutting solution for non-metallics. Small diameter hole saws are perfect for kitchen and bathroom installations. Smooth surface finish, ideal when cutting glass and ceramics. Supported by a comprehensive range of arbors with carbide tipped pilot drills. The ultimate hole saw for hard-to-cut materialsTeeth Type: Synthetic diamond gritCountry of Origin: CN Specifications: Diameter …

from £16.95 up to £18.99

Dart DART Cordless Wood Saw Blade 210mm x 30mm Bore x 36 Teeth

The ALM Manufacturing Replacement Chainsaw Chains to fit a wide range of chainsaw makes and models.The ALMCH045 Chainsaw Chain has a 3/8 inch Low profile (L/P), 0.043in guidebar slot 0.375 mm and Low more→profile (L/P) 1.3 mm guidebar slot. This chain is made to fit the Black & Decker range and suit saws with a 30 cm bar and chain with 45 drive links including:GK1730TK.Additional Information:• Bar Size: 30cm• Links: 45

34.99Buy!
£

Starrett Deep Cut Hole Saw 102mm DCH0034

Delivery: to United Kingdom

Report

Professional TCT Thin Kerf blades designed for cordless machines to reduce power drain. The thin kerf increases efficiency and runtime on cordless machines. These quality blades feature an Alternate T more→op Bevel (ATB) tooth configuration for the professional tradesman and the front bevel tooth form is for a superior quality of cut. The unique 'gold' coating creates ultra low friction and wear resistance. The blades are body hardened and tempered to maintain trueness. Anti-kickback is for smooth action and safety during use. These blades have a reamed bored ensuring precise fit to spindles. They are suitable for use on rip saws and are in available in sizes from 165mm to 305mm diameter for

from £18.95

Bosch Expert Endurance Heavy Duty Carbide Holesaw 67mm 2608900432

The Deep Cut Bi-Metal Hole saws combine the aggressive tooth form from our previous Dual Pitch Hole Saws, with the new extra cobalt HSS teeth to provide enhanced heat and wear resistance. Featuring a more→10mm increase in hole saw depth and aggressive material penetration and kerf clearance, it is the complete multi-purpose hole saw to penetrate deep into metals, wood, plastic, plaster and other materials. Aggressive material penetration and kerf clearance. Ideal for solid materials or tubes of a wall thickness greater than 3mm. 51mm hole saw depth improves cutting performance on tubes, particularly where there is a need to cut through both sides of the tube. New tooth material for enhanced heat …

from £30.99 up to £34.95

Compare prices₅→

Lasts up to 50x longer than a BiMetal hole saw in tough materialsMost hole saws for wood and metal seem to work fine - until you hit a hardened nail or screw. Then they scream and smoke and grind unti more→l their teeth are torn off, and you still only have half a hole. With its carbide teeth, the Expert Tough Material barely slows down when it hits metal – it cuts neatly through and keeps on cutting holes, time and again.Made with Bosch Carbide Technology, each tooth is an optimum grade of the hardest metal, laser welded and ground six times for the perfect cutting shape. This makes the Bosch Expert Tough Material Hole Saw ideal for tough jobs and all-round trades work: As well as wood and metal, i…

Reisser 851520THN Thin Kerf Blade For Cordless Circular Saw Positive Hook

20.10Buy!
£

PowerToolsDirect.com

Delivery: in United Kingdom

Report

Reisser Thin Kerf Circular Saw Blades Premium quality Available for woodReisser Thin Kerf Circular Saw Bladefor soft and hard woodsÆ85mm x 15mm bore x 20 teeth ATB 15° positive hookPTDREI851520THN

Bosch Angle Grinder Dry Diamond Hole Cutter for Ceramics 25mm

from £39.59 up to £69.99

Compare prices₇→

It is suitable for use with angle grinders. The Diamond Cutter Dry Speed delivers long life when dry drilling hard ceramics. Its high-class diamonds provide very high drilling speeds, and its vacuum-b more→razing technology ensures a long lifetime. This product is intended for tiles ranging from soft wall tiles to very hard floor tiles, such as stoneware. • Long Life for Hard Ceramics • Diamond Cutter Dry Speed delivers long life when dry drilling hard ceramics • High-class diamonds provide very high drilling speeds • Vacuum-brazing technology ensures long lifetime Specifications: Diameter (D) mm: 25 Diameter (D) Inch: 1 Working length (L1) mm: 35 Materials: Stone Materials …

Starrett KFC06021 8 Piece Electricians Hole Saw Set

54.95Buy!
£

Tooled-up.com

Delivery: to United Kingdom

Report

Fast Cut Bi-Metal Hole Saws contain an extra cobalt HSS tooth material for enhanced heat and wear resistance, along with a new 5.5 TPI positive rake tooth design, to ensure a smoother and faster cut w more→hen compared against our previous Constant Pitch Hole Saw. Specifically designed to cut stainless steel, metals and mild steel sheet, Fast Cut Saws will also cut through wood, plastic, plaster and other materials. Recommended cutting depth - up to 13mm (1/2”) in softer materials. New tooth material with extra cobalt for enhanced heat and wear resistance - improving the product life. The 5.5 TPI positive rake tooth form provides less torque for a smoother, faster cut in all materials. 30% extra gu…

HUSQVARNA Screw 503214972 503-21-49-72

46.92Buy!
£

Amazon.co.uk

Delivery: to United Kingdom

Report

Makita Performance HSS Bi Metal Hole Saw 79mm P-52685

from £19.95

Rotabroach Mini Hole Saw Cutters 15mm RCM150

HSS Bi-Metal variable pitch tooth 4-btpi with 5% cobalt content for high durability and extended working life. Suitable for wood, gypsum board, plastics, non ferrous metals, aluminium, steel and stain more→less steel. Large range from 14-152mm with hex and SDS adaptors and extra long pilot drill. Features & Benefits • High durability and extended working life • Large range from 14-152mm • Application: Holes, conduit, piping, sheet metal, channelling, trunking, lighting Specifications • Diameter: 79 mm • Arbor Part Number: P-35162 / P-35184 • Pack Quantity: 1

from £22.95

Trend Trend 190mm 24T Craft Circular Saw Blade for DeWalt Wormdrive

Rotabroach mini cutters are designed for use in standard drill chucks and deliver clean, burr-free holes with minimum power consumption, making them ideal for use with cordless machines. Sizes 6mm to more→20mm are suitable for use in 3/8" or 1/2" drill chucks. Sizes 21mm and above are suitable for 1/2" drill chucks only. For information on the arbor & pilot drill assembly needed for your requirements, please see the attached PDF below. Complete kits are also available (RK604 and RK603) Specifications • Size Range: 6mm – 25mmø (RCM060 – RCM250) • Cutting Depths: 6.4mm up to 20mmø / 12.7mm over 20mmø • Max. Tensile Strength: < 900N/mm² • Ideal For: Sheet Metal, Pipes & PlasticsFeatures & Benefits• Rotabroach Mini Cutters cut clean, burr-free holes in seconds. • The professional solution for cutting holes in sheet metal, pipes and plastics. • Precision ground teeth and flutes ensure a fast, smooth and accurate cut every time. • Over 3 times faster than standard twist drills making them highly economical. • Low power consumption giving a long life to cordless drills.…

16.44Buy!
£

Starrett Tungsten Carbide Tipped Hole Saw 79mm CT034

Delivery: to United Kingdom

Report

Thin kerf sawblades for cordless saws. Sawblades designed for a professional finish in soft wood, hard wood, plasterboard, stone fibre board, particle board, veneer, plywood, MDF and hardboard. Ream more→ed bore to ensure precise fit to spindle. Silverbraze to ensure tip is bonded securely to body. Body hardened and tempered to maintain trueness. Laser etched on reverse to European standard EN847-1/2. The Trend name for traceability and a guarantee of quality. High grade alloy steel plate body precision ground to maintain flatness. Not for use with Bosch GSK 24.

from £38.95

Faithfull Varipitch Bi Metal Hole Saw 140mm HSVP140

The strong, high performance triple chip Tungsten Carbide Tipped hole saw provides long life when cutting difficult and abrasive materials, such as wood and PVC. It offers a cost effective solution fo more→r cutting through nail embedded wood, or virtually any wood and metal combination, reinforced concrete and fibreglass. Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster. Tungsten Carbide Tipped teeth for outstanding cutting performance and product durability. Will cut nail embedded wood or virtually and wood and metal combination, such as wooden doors with metal fascia panels. Cutting depth of 41mm (1.5/8""). Suitable for use …

from £27.95 up to £39.99

Evolution Evolution 230 - Stainless Steel Cutting Blade

Faithfull Bi-Metal Cobalt Holesaws with precision set teeth for aggressive material penetration and swarf clearance. This also provides a smooth, fast cutting action. Manufactured from bi-metal materi more→al with a 8% cobalt content for increased heat and wear resisitance for greater product life. Will cut thin and thick guage materials. Ideal for use on a wide variety of materials including: stainless steel, steel, aluminium, sheet metal, mild metal, non-ferrous metals, cast iron, soft/hard wood and PVC. Suitable for use in most variable speed power drills. Specification Cutting Depth: 38mmDiameter: 140mmAdditional Information:• Size: 140mm• Material: Bi-Metal

50.99Buy!
£

Starrett Carbide Tipped Stainless Cutting Hole Saw 30mm SM30

Delivery: to United Kingdom

Report

Evolution 230mm 60 tooth blade for cutting stainless steel. Evolution saw blades are designed to deliver maximum performance by using the highest grade carbide, hardened blade bodies & ultra high-grad more→e brazing techniques. All offer premium quality to increase production & performance!

from £16.99 up to £18.95

Bosch Expert Speed Multi Construction TCT Hole Saw 76mm 2608900473

Ideal for cutting stainless and high alloy steels, non-ferrous light metals and reinforced fabrics, all at a much faster speeds than bi-metal hole saws. Perfect for production cutting and particularly more→suitable for use in drills with limited speed control.• Split-point drill for faster penetration and self-centring • Ideal for production cutting, and particularly suitable for use in drills with limited speed control • Fitted with ejector spring for easy core removal • Step drill for faster cuts in thinner materials • Tungsten carbide tipped teeth provide superb product life and cutting performance • Safety stop at the base of the hole saw prevents drilling beyond the maximum cutting depth of 13m…

from £28.95

Makita 345530-7 Splitting Blade for Model 2704 P Table Saw

Lasts up to 50x longer than HCS hole saw in tough materialsCutting holes in brick, soft tiles and drywall is essential for plumbers and electricians on a building site or during renovation work. Few h more→ole saws can withstand this kind of work in a mixture of tough construction materials, but the Expert Construction Material can. This one hole saw serves, and lasts, for many jobs.With just a few huge carbide teeth on its steel body, the Expert Construction Material delivers a real bite. Its large slots are optimised for fast chip removal, so it eats through anything from brick to wood and particle boards, fast. Bosch Carbide Technology is an optimum mix of the hardest metals, and ensures an extremely …

16.15Buy!
£

Amazon.co.uk

Delivery: to United Kingdom

Report

Use for model 2704 P table saw Sold in each Easy to use Manufacturer: Makita Werkzeug GmbH

Bosch 2608594229 HSS-Bi Metal Progressor Hole Saw 70mm

from £15.74 up to £22.95

Compare prices₈→

Bosch 2608594229 HSS-Bi-Metal Progressor Holesaw for Wood and Metal 70mmThe Bosch 2608594229 HSS-Bi-Metal Holesaw has a diameter of 70mm and a working length of 44mm. BiM Progressor Hole Saw offers 2x more→longer lifetime than its predecessor. It has been redesigned with Bosch Bi-Metal with 8% cobalt alloy for increased durability. Additionally, it has an enhanced progressive tooth strip that enables faster cuts. Use this hole saw when drilling holes in wood, drywall, plastics, metal, non-ferrous metal and stainless steel. It is suitable for use with all corded and cordless drill drivers.Features:
- BiM Progressor Hole Saw offers 2x longer lifetime than predecessor
- Redesigned with Bi-Metal with …

Husqvarna Plate Part 503770901

52.29Buy!
£

Amazon.co.uk

Delivery: to United Kingdom

Report

Genuine OEM Husqvarna Plate Part 503770901 Fits: Husqvarna: 123 HD 60, 123 HD 65X, 225 H, 225 H 60, 225 H 75, 323 HD 60, 325 HD 60X, 325 HD 75X, 326 HD 60X, 326 HD 75X Hedge Trimmers

Bahco 3830 C Bi-Metal Variable Pitch Hole Saw 76mm 3830-76-C

from £16.95 up to £19.99