Power Saws

Lasts up to 50x longer than HCS hole saw in tough materialsCutting holes in brick, soft tiles and drywall is essential for plumbers and electricians on a building site or during renovation work. Few hole saws can withstand this kind of work in a mixture of tough construction materials, but the Expert Construction Material can. This one hole saw serves, and lasts, for many jobs.With just a few huge carbide teeth on its steel body, the Expert Construction Material delivers a real bite. Its large slots are optimised for fast chip removal, so it eats through anything from brick to wood and particle boards, fast. Bosch Carbide Technology is an optimum mix of the hardest metals, and ensures an extremely …

Milwaukee Bi-Metal Contractors Holesaw features an optimised variable 4-6 tooth geometry for faster cutting and universal use. Bi-Metal teeth for best durability and increased wear resistance. For universal use with steel, non ferrous metals, wood, drywall plasterboard and plastics. Specifications • Diameter: 152mm • Cutting Depth: 38mmFeatures & Benefits• Optimised variable 4-6 tooth geometry for faster cutting • Bi-Metal teeth for best durability and increased wear resistance • For universal use: steel, non ferrous metals, wood, drywall plasterboard, plastics

Bosch 2608594229 HSS-Bi-Metal Progressor Holesaw for Wood and Metal 70mmThe Bosch 2608594229 HSS-Bi-Metal Holesaw has a diameter of 70mm and a working length of 44mm. BiM Progressor Hole Saw offers 2x longer lifetime than its predecessor. It has been redesigned with Bosch Bi-Metal with 8% cobalt alloy for increased durability. Additionally, it has an enhanced progressive tooth strip that enables faster cuts. Use this hole saw when drilling holes in wood, drywall, plastics, metal, non-ferrous metal and stainless steel. It is suitable for use with all corded and cordless drill drivers.Features:
- BiM Progressor Hole Saw offers 2x longer lifetime than predecessor
- Redesigned with Bi-Metal with …

Holzmann FS1500 1.5 m guide rail for use with TAS165 and TAS165PRO plunge saws. Made of high quality rigid aluminium to avoid flexing, this guide rail also features two plastic insert runners to allow the saw to pass smoothly along the length of the rail. There are also two anti-slip strips on the underneath side which allow the rail to be used without the need of additional clamping device. The FS1500 allows for accurate straight cutting across wide boards and kitchen worktops, as well as plunge cutting through wooden floors. Join 2 x rails together to increase cutting length to 3.0 m. Also includes splinter guard edging strip. Features: High quality aluminium guide rail for accurate straight c…

The Diamond for Hard Ceramics Hole Saw cuts through the hardest tiles. Its diamond coating gives this hole saw durability on very strong tiles made from all types of ceramic materials. In addition, the thin cutting edge allows for rapid, clean cuts. Use this hole saw when cutting through wall and floor tiles. The Diamond for Hard Ceramics Hole Saw features Bosch´s unique power-change adapter with the fastest arbour system on the market. It allows for locking and unlocking the hole saw and pilot drills in one click. It is suitable for use with corded and cordless drill drivers. • Cuts Through the Hardest Tiles • Diamond for Hard Ceramics Hole Saw cuts through the hardest tiles • D…

Bahco Sandflex® holesaws are made for high precision cutting of holes from 14 mm to 152 mm diameter in all sawable materials up to 38 mm thick. Suitable for use in portable electric or pneumatic tools, and in a wide variety of drilling, boring, milling and other machine tools. All saws have varipitch (4-6tpi) blades.Cutting edges are in high speed steel for extra hardness, with welded seams for accuracy of cut, and heat-treated bodies for maximum strength.Size: 92 mm. Arbors to suit (available separately). Code Holesaw Size ShankBAH3834930 930 14-30 mm 3/8 Inch (8.5mm).BAH38341130 1130 14-30 mm 7/16 Inch (11.1mm).BAH38349100 9100 32-100 mm 3/8 Inch (8.5mm).BAH383411152 11152 32-210 mm 1/2 …

The bi-metal Hole Saw fits all standard adapters on the market. The bi-metal Hole Saw offers smooth cutting through various materials. The tooth configuration (Vario tooth strip) is ideal for gliding through material to provide smooth cuts. Made of bi-metal HSS (high-speed steel) containing 8% cobalt alloy, this hole saw has less risk of tooth breakage and higher heat resistance for long-lasting cutting. Use this hole saw when cutting through wood, metal and plastics • Smooth Cutting • Bi-metal Hole Saw offers smooth cutting through various materials • Tooth configuration (Vario tooth strip) is ideal for gliding through material to provide smooth cuts • Made of bi-metal …

HSS Bi-Metal variable pitch tooth 4-btpi with 5% cobalt content for high durability and extended working life. Suitable for wood, gypsum board, plastics, non ferrous metals, aluminium, steel and stainless steel. Large range from 14-152mm with hex and SDS adaptors and extra long pilot drill. Features & Benefits • High durability and extended working life • Large range from 14-152mm • Application: Holes, conduit, piping, sheet metal, channelling, trunking, lighting Specifications • Diameter: 57 mm • Arbor Part Number: P-35162 / P-35184 • Pack Quantity: 1

Lenox SPEED SLOT® Hole Saws with T3 technology™ Features & Benefits• 50% Longer Life. 2X More Durable • 10% Thicker Wall adds strength and durability • Improved Metal Cutting Performance • Increased wall thickness improves durability and minimizes tooth loss • Optimized tooth design penetrates metal with ease • Fast, efficient cutting in wood • Larger, sharper teeth remove more wood for fast cutting • Easy plug removal • Speed Slot staircase design for fast, easy plug ejection

The strong, high performance triple chip Tungsten Carbide Tipped hole saw provides long life when cutting difficult and abrasive materials, such as wood and PVC. It offers a cost effective solution for cutting through nail embedded wood, or virtually any wood and metal combination, reinforced concrete and fibreglass. Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster. Tungsten Carbide Tipped teeth for outstanding cutting performance and product durability. Will cut nail embedded wood or virtually and wood and metal combination, such as wooden doors with metal fascia panels. Cutting depth of 41mm (1.5/8""). Suitable for use …

High performance hole saws for drilling small diameter holes in non-metallics. The ideal solution for the toughest cutting situations. Featuring a diamond coated cutting edge permanently bonded to a tough steel body, the Starrett Diamond Grit hole saw provides the necessary clearance for cutting at high speeds. Rapid cutting solution for non-metallics. Small diameter hole saws are perfect for kitchen and bathroom installations. Smooth surface finish, ideal when cutting glass and ceramics. Supported by a comprehensive range of arbors with carbide tipped pilot drills. The ultimate hole saw for hard-to-cut materialsTeeth Type: Synthetic diamond gritCountry of Origin: CN Specifications: Diameter …

Fast Cut Bi-Metal Hole Saws contain an extra cobalt HSS tooth material for enhanced heat and wear resistance, along with a new 5.5 TPI positive rake tooth design, to ensure a smoother and faster cut when compared against our previous Constant Pitch Hole Saw. Specifically designed to cut stainless steel, metals and mild steel sheet, Fast Cut Saws will also cut through wood, plastic, plaster and other materials. Recommended cutting depth - up to 13mm (1/2”) in softer materials.Teeth per Inch (25mm): 5,5Teeth Type: Extra Cobalt HSSCountry of Origin: BR Specifications: Diameter metric: 98mm Diameter imperial: 3,7/8" Cutting Depth metric: 41mm Cutting Depth imperial: 1,5/8" Thread Size: 5/8 - 18…