Power Saws

2-Piece set comprising 300mm engineer's hacksaw and 150mm junior hacksaw. Engineer's hacksaw features a die-cast handle and stock with lightweight aluminium frame. Twin (90 and 45) blade positions for comfortable and accurate cutting. Junior hacksaw features an aluminium frame and comfortable composite handle. Multi-position clamp permits blade to be mounted at different angles. Both supplied with a carbon steel blade suitable for cutting a variety of materials.

The CorePlus Diamond Holesaw provides professional, fast, clean cutting on a wide range of materials, from hard porcelain tile and stone to cement board and fibreglass. Leading-edge vacuum brazing technology ensures the diamonds stay bonded for extremely long life. Minimal water cooling is required when cutting hard tile, stone and glass. Use fully dry on other materials. Fluid, snag-free cutting, no secondary finishing required. The ultra-thin kerf generates a low amount of torque for faster cutting and extended battery life. Use with an arbor on a cordless drill or with an adaptor nut on an angle grinder.1 x CorePlus DMPHS83 Diamond Holesaw 83mm.Additional Information:• Size: 83mm• …

The ALM Manufacturing Replacement Chainsaw Chains to fit a wide range of chainsaw makes and models. The ALMCH050 Chainsaw Chain has a 3/8 inch Low profile (L/P), 0.043in guide bar slot 0.375 mm and Low profile (L/P) 1.1 mm guide bar slot. This chain is made to fit the B& Q / McCulloch / Performance Power / Stihl ranges and suit saws with a 35cm bar and chain with 50 drive links including PWR1700CSB, PP35CS / Electramac 335, Electramac 414, Electramac 441 / MS180, 020, 021, 023

Lasts up to 50x longer than a BiMetal hole saw in tough materialsCutting holes in sheets of steel is not like other hole saw applications. In industrial settings, or when working on vehicles, you have to be extremely precise – but at the same time the material is hard and destroys traditional BiMetal hole saws. The Expert Sheet Metal solves all these issues in one compact piece of high quality engineering.The Expert Sheet Metal is made from a single cylinder of turned metal for ultimate stability, robustness and accuracy. Extreme durability and the ability to cut the hardest grades of steel comes from its carbide teeth, which are individually sharpened and brazed onto the body.This hole saw pa…

Most hole saws for wood and metal seem to work fine - until you hit a hardened nail or screw. Then they scream and smoke and grind until their teeth are torn off, and you still only have half a hole. With its carbide teeth, the EXPERT Tough Material barely slows down when it hits metal – it cuts neatly through and keeps on cutting holes, time and again.The Bosch EXPERT Tough Material Hole Saw great all-rounder for every tradesman – because half a hole is not even worth half a hole.Features:- Long Life Cutting Holes in Multi Material- Exceptional durability is built in with Bosch Carbide Technology.- Individually ground teeth made from fine, hard Carbide.- For use with the Bosch Power Change Plus…

The Bahco Electrician's Bi-Metal Holesaw Set contains Sandflex Bi-Metal holesaws, specially designed for metal cutting ferrous metals (steel, stainless steel, cast iron) and non-ferrous metals (aluminium, brass, copper). They can also be used in most materials such as wood and plastics. Bi-metal construction with 8% cobalt for increased wear resistance. This 10 Piece Kit contains 8 x Holesaws 20, 25, 30, 35, 44, 51, 64 and 76mm 2 x Arbors

Endurance holesaw for Heavy Duty applications with sintered carbide teeth providing extreme durability during the most demanding use, 20x longer life compared with BiM (bimetal) tooth cutters. Increased cutting depth allows material to be cut up to 60mm thickness. Heavy duty design cuts into materials, where BiM saw blades just aren't enough. Sintered carbide teeth technology ensures higher temperature resistance during drilling into hard and abrasive materials such as hardened screws, nails, stainless steel, brick and similar. Holesaws can be easily replaced in seconds, thanks to the Power Change Plus adaptor (not supplied), one adaptor for all 20-127mm diameter holesaws.

SANDFLEX bi-metal holesaw set containing popular sizes for the engineering, water, sanitation and electrical installation industries. The holesaws work excellently in most materials, such as wood, plastics, non ferrous and ferrous steel including stainless steel. Their knockout holes allow easy removal of cores. Holesaws 1 of each of 16mm (5/8in), 20mm (25/32in), 25mm (1in), 32mm (1.1/4in), 40mm (1.9/16in) and 51mm (2in). Arbors 3834-ARBR-1130 - for holesaws 14-30mm, 3834-ARBR-11152 - for holesaws 32-210 mm. Also includes a pilot drill, hexagon key and chip brush.

Features:- Diamond Cutter Dry Speed Delivers Long Life When Dry Drilling Hard Ceramics- High-Class Diamonds Provide Very High Drilling Speeds- Vacuum-Brazing Technology Ensures Long Lifetime- With 22.23 Mm Bore For Standard Locking Nut Angle Grinders.Rs.Specifications:Materials:- Hard Tiles- Hard Stone- Lime And Sand Bricks- Solid Brick- Diameter (D) Mm: 30- Diameter (D) Inch: 1 3/16- Working Length (L1) Mm: 35

The Special for Sheet Metal Hole Saw offers durability while cutting holes through metal. Made of bi-metal HSS (high-speed steel) containing 8% cobalt alloy, this hole saw has less risk of tooth breakage and higher heat resistance for extreme resilience and a long product lifetime. The configuration of the teeth on the Vario tooth strip is ideal for sawing through thin material with reduced wear on the cutting edge. Furthermore, a depth-stop feature prevents breakthroughs to protect the work surface. Use this hole saw when cutting through sheet metal with a thickness of less than 5 mm, such as mild steel and stainless steel. The Special for Sheet Metal Hole Saw features Bosch's unique power-change …

HSS Bi-Metal variable pitch tooth 4-btpi with 5% cobalt content for high durability and extended working life. Suitable for wood, gypsum board, plastics, non ferrous metals, aluminium, steel and stainless steel. Large range from 14-152mm with hex and SDS adaptors and extra long pilot drill. Features & Benefits • High durability and extended working life • Large range from 14-152mm • Application: Holes, conduit, piping, sheet metal, channelling, trunking, lighting Specifications • Diameter: 86 mm • Arbor Part Number: P-35162 / P-35184 • Pack Quantity: 1

Makita 122563-7 Horizontal Clamp for Mitre Saw.

The strong, high performance triple chip Tungsten Carbide Tipped hole saw provides long life when cutting difficult and abrasive materials, such as wood and PVC. It offers a cost effective solution for cutting through nail embedded wood, or virtually any wood and metal combination, reinforced concrete and fibreglass. Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster. Tungsten Carbide Tipped teeth for outstanding cutting performance and product durability. Will cut nail embedded wood or virtually and wood and metal combination, such as wooden doors with metal fascia panels. Cutting depth of 41mm (1.5/8""). Suitable for use …

High performance hole saws for drilling small diameter holes in non-metallics. The ideal solution for the toughest cutting situations. Featuring a diamond coated cutting edge permanently bonded to a tough steel body, the Starrett Diamond Grit hole saw provides the necessary clearance for cutting at high speeds. Rapid cutting solution for non-metallics. Small diameter hole saws are perfect for kitchen and bathroom installations. Smooth surface finish, ideal when cutting glass and ceramics. Supported by a comprehensive range of arbors with carbide tipped pilot drills. The ultimate hole saw for hard-to-cut materialsTeeth Type: Synthetic diamond gritCountry of Origin: CN Specifications: Diameter …

Ideal for production cutting of high alloy and stainless steels, non ferrous light metals and reinforced fabrics. Tungsten carbide tipped teeth provide superb product life and cutting performance. The teeth have a positive cutting angle which provides fast and efficient removal of chips and swarf plus a high cutting accuracy. Safety stop at the base of the holesaw prevents drilling beyond maximum cutting depth of 13mm (1/2). Complete assembly - no need to purchase a separate arbor and pilot drill. Replacement pilot drills available.)

The Milwaukee Hole Dozer Hole Saw features Rip Guard, the strongest tooth form in the industry, backed by the Rip Guard Limited Lifetime Tooth Break Warranty. Each tooth is built with more steel behind the cutting edge for added strength. The Rip Guard warranty on tooth breaks is a first for the hole saw industry. The added tooth strength along with 8% cobalt give added life to the teeth, allowing for increased productivity on the jobsite, as well as continued hole quality. The Hole Dozer includes Plug Jack, an all access slot design that allows for full access during plug removal. The Plug Jack gives access lower into the cup for thick material and higher towards the teeth for thin material.…