Power Saws

The strong, high performance triple chip Tungsten Carbide Tipped hole saw provides long life when cutting difficult and abrasive materials, such as wood and PVC. It offers a cost effective solution for cutting through nail embedded wood, or virtually any wood and metal combination, reinforced concrete and fibreglass. Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster. Tungsten Carbide Tipped teeth for outstanding cutting performance and product durability. Will cut nail embedded wood or virtually and wood and metal combination, such as wooden doors with metal fascia panels. Cutting depth of 41mm (1.5/8""). Suitable for use …

High performance hole saws for drilling small diameter holes in non-metallics. The ideal solution for the toughest cutting situations. Featuring a diamond coated cutting edge permanently bonded to a tough steel body, the Starrett Diamond Grit hole saw provides the necessary clearance for cutting at high speeds. Rapid cutting solution for non-metallics. Small diameter hole saws are perfect for kitchen and bathroom installations. Smooth surface finish, ideal when cutting glass and ceramics. Supported by a comprehensive range of arbors with carbide tipped pilot drills. The ultimate hole saw for hard-to-cut materialsTeeth Type: Synthetic diamond gritCountry of Origin: CN Specifications: Diameter …

Fast Cut Bi-Metal Hole Saws contain an extra cobalt HSS tooth material for enhanced heat and wear resistance, along with a new 5.5 TPI positive rake tooth design, to ensure a smoother and faster cut when compared against our previous Constant Pitch Hole Saw. Specifically designed to cut stainless steel, metals and mild steel sheet, Fast Cut Saws will also cut through wood, plastic, plaster and other materials. Recommended cutting depth - up to 13mm (1/2”) in softer materials.Teeth per Inch (25mm): 5,5Teeth Type: Extra Cobalt HSSCountry of Origin: BR Specifications: Diameter metric: 98mm Diameter imperial: 3,7/8" Cutting Depth metric: 41mm Cutting Depth imperial: 1,5/8" Thread Size: 5/8 - 18…

The IRWIN bi-metal holesaws have been designed for the professional and made to provide long-lasting performance for use in general construction, electrical installation, plumbing, heating and ventilation, and remodelling applications. The sharp, variable tooth (4-6 pitch) design provides a faster cutting action and enhanced performance in a variety of materials and cutting applications. The bi-metal construction and the electron beam welded teeth give the user a stronger, longer-lasting blade. The IRWIN holesaw range is available from sizes 14 mm (9/16in) to 152 mm (6in), with a line up of high-quality arbors and a pilot drill to cover all application requirements. Cuts a variety of materials …

• HSS Air saw blades suitable for Model No. SA346.• Contents: 18tpi Saw Blades (x5), 24tpi Saw Blades (x5), 32tpi Saw Blades (x5).• Supplied in a pack of 15.HSS Air saw blades suitable for Model No. SA346. Contents: 18tpi Saw Blades (x5), 24tpi Saw Blades (x5), 32tpi Saw Blades (x5). Supplied in a pack of 15.Technical Specification:Application(s): SA346Blade Pitch: 18tpi (x5), 24tpi (x5), 32tpi (x5)Nett Weight: 0.12kgPack Qty: 15Dimensions: Length: 5mm x Height: 235mmWeight: 0.124KgWarranty: Consumable

The Dewalt DT20665 Oregon Chainsaw Bar & Chain is suitable for use with the DCM565P1The Dewalt DT20665 chainsaw Bar & Chain is suitable for use with the DCM565P1. Its high-grade materials ensure maximum strength and long life when cutting through large limbs, logs, and thick beams.Features:
- Lubri Jet oil holes reduce oil-hole plugging and enhance bar-chain lubrication
- Lubri-Dam oil-retaining feature prevents oil from running out the bar's tail, keeps more oil on the bar and chain
- Super-tough chrome-moly steel provides superior bar-body strength and tough rails with excellent resistance to wear and chippingSpecification:
- Length: 30cm

Faithfull Bi-Metal Cobalt Holesaws with precision set teeth for aggressive material penetration and swarf clearance. This also provides a smooth, fast cutting action. Manufactured from bi-metal material with a 8% cobalt content for increased heat and wear resisitance for greater product life. Will cut thin and thick guage materials. Ideal for use on a wide variety of materials including stainless steel, steel, aluminium, sheet metal, mild metal, non-ferrous metals, cast iron, soft/hard wood and PVC. Suitable for use in most variable speed power drills. Specification Cutting Depth 38mm

These high-speed variable pitch bi-metal hole saws are ideal for cutting perfectly round and accurate holes in metals, plastics and wood up to a depth of 35mm (1.3/8”). They offer a hardened M3 steel cutting edge that is welded to a tough alloy steel body, making them very durable and hardwearing. The construction reduces the risk of shattering. The holesaws have four side slots for removal of slug, as well as a female threaded spindle for fixing to a 9.5mm arbor. It can be easily attached to power drills for a fast, clean, heavy-duty cutting action in stubborn materials. When metal cutting it is advisable to use a lubricant to prolong the service life of the hole saw, such as Stock No.…

Lasts up to 50x longer than HCS hole saw in tough materialsCutting holes in brick, soft tiles and drywall is essential for plumbers and electricians on a building site or during renovation work. Few hole saws can withstand this kind of work in a mixture of tough construction materials, but the Expert Construction Material can. This one hole saw serves, and lasts, for many jobs.With just a few huge carbide teeth on its steel body, the Expert Construction Material delivers a real bite. Its large slots are optimised for fast chip removal, so it eats through anything from brick to wood and particle boards, fast. Bosch Carbide Technology is an optimum mix of the hardest metals, and ensures an extremely …

The Wiha electric Hacksaw is for use during electrical installation work. Its insulated handle offers full protection during work on live parts up to 1,000V. Fitted with an ergonomic handle that ensures comfortable work.Supplied with two replacement saw blades. If the teeth are blunt, the blades on the electrician's saw can be replaced quickly and easily. The plastic screw enables easy clamping and adjusting of the saw blade.Manufactured acc. to IEC 60900. Specifications: Blade Length: 150mm.Overall Length: 280mm.

Lasts up to 50x longer than a BiMetal hole saw in tough materialsMost hole saws for wood and metal seem to work fine - until you hit a hardened nail or screw. Then they scream and smoke and grind until their teeth are torn off, and you still only have half a hole. With its carbide teeth, the Expert Tough Material barely slows down when it hits metal – it cuts neatly through and keeps on cutting holes, time and again.Made with Bosch Carbide Technology, each tooth is an optimum grade of the hardest metal, laser welded and ground six times for the perfect cutting shape. This makes the Bosch Expert Tough Material Hole Saw ideal for tough jobs and all-round trades work: As well as wood and metal, i…