Car Jacks

• Suitable for use with our lever hoists or chain blocks.• Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways.• Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer.Suitable for use with our lever hoists or chain blocks. Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer.• Suitable for use with our lever hoists or chain blocks. • Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. • Incorporates wheel guards to prevent contact with other trolleys mounted on same load…

Flat arm with spring loaded roller bearings for use with SJBEX3000S and SJBEX4000S Jacking Beams. When unloaded these arms support the weight of the beam, allowing for it to run smoothly along the pit edge. In position, and when the beam is under load, the bearings retract, to leave the flat of the arm, to stabilise the lift.Features & Benefits:• Flat arm with spring loaded roller bearings for use with SJBEX3000S and SJBEX4000S Jacking Beams.• When unloaded these arms support the weight of the beam, allowing for it to run smoothly along the pit edge.• In position, and when the beam is under load, the bearings retract to leave the flat of the arm to stabilise the lift.• Model No. SJBEX.A01Speci…

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…

Expert Quality, for stabilizing HGVs whilst parked. Manufactured from anti-slip, non-sparking, highly visible weatherproof heavy duty HDPE plastic. Sold loose as single chock.

Screw adjustment with easy-to-use spinner nut and ball-bearing thrust race for smooth operation. Removable base for easier storage. Adjustable over a 668mm range. Features & Benefits: • Screw adjustment with spinner nut. • Ball-bearing thrust race. • Removable base. • Min./Max. Height: 1364/2032mm. • Model No. ES750 Specifications: Model No ES750 Brand: Sealey Capacity: 750kg Maximum Height: 2032mm Minimum Height: 1364mm Nett Weight: 12.78kg

Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). All duplex slings are manufactured to the European lifting sling standard, giving a 7:1 safety factor. Each sling is individually numbered for traceability and is supplied with a certificate of conformity.Working Load Limit: 1 tonne x 4 metre

• Replacement hydraulic ram for SPC2000 engine crane.Replacement hydraulic ram for SPC2000 engine crane.• Replacement hydraulic ram for SPC2000 engine crane. • Model No. SPC2000.28Technical Specification:Nett Weight: 17.5kgRam Capacity: 8000kgRam Diameter: 37.89mmRam Travel: 624mmPump Type: Twin SpeedRam Pin Hole Diameter: 22.0mmClevis Pin Hole Diameter: 27.5mm*Mounting Point Distance (Min.): 797mm**Overall Length (Min.): 855mmBase Mount Type: Spigot Mounted * Internal diameter of spigot mount ** From base plane to ram pin centreDimensions: Length: 150mm x Height: 860mmWeight: 18KgWarranty: Consumable

Pair of chocks to prevent vehicles moving whilst working with trolley jacks, scissor jacks, bottle jacks, axle stands or on a slope. Display carton.

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type A design.• Fits over the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type A. Profile Depth of 19mm. Size ø148mm. Fits saddle ø128-131mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type A. • Profile Depth: 19mm. • Size: ø148mm. • Fits saddle ø128-131mm. • Model No. JP04Technical Specification:Nett Weight: 0.29kgJack Pad Size: ø148mmStyle: Type AProfile Depth: 19mmTo Fit Saddle Size: ø128-131mmWeight: 0.29kgDimensions: Length: 20mm x Height: 280mmWeight: 0.3KgWarranty: Consumable

Designed for use with the CR2 Car Ramp Extension Set (part number: TUPCR2), this pair of car ramp extensions fits onto the base of the ramps to provide a more gradual gradient for raising low ground clearance vehicles. It will prove invaluable if working with many types of sports car or custom vehicle. The Car Ramps are NOT included, & are available for purchase separately. Important Always use wheel chocks when using a car ramp to avoid the danger of cars slipping off the ramps. Specifications • D 2.5 cm • W 12 cm • L 50 cmFeatures & Benefits• Removable extensions create a smoother gradient for ease of access • Extensions prevent lower vehicles from being scraped on …