Car Jacks

Quickly and safely overcomes the awkward job of lifting 4x4 vehicles with offset differentials. Simply remove the existing trolley jack saddle, replace with cross beam adaptor, fit the jack saddle into the hole in the adaptor* (30mm max spigot pin) and you are ready to lift. Suitable for jacks with a 30mm saddle spigot pin. *Note: Remove any rubber jack pad from the saddle before using to improve safety.

Rubber Jack Pad for Trolley Scissor Jack Fits BMW 1pcs Rubber Pad designed for BMW models Size:65 x 44 Sill Pad Protector Made of high quality rubber, will not damage the vehicle. Suitable for most floor jacks and lifts This is a high-quality HEYNER German product

Note: Image is for illustrative purposes only and may differ from the actual product

Heavy-duty chassis with strengthening flanges along the top edge for extra torsional rigidity under load. Profiled lifting arm allows low clearance height of just 85mm making this unit suitable for sports and custom cars. Fitted with heavy-duty one-piece hydraulic unit with pump-through action preventing handle locking at maximum ram extension. White saddle aids positioning under vehicle and safety valve prevents overloading.2 Tonne Low Profile Short Chassis Trolley Jack• Min./Max. Saddle Height: 85/385mm allowing low entry.• Chassis Length: 563mm.• Heavy-duty chassis with strengthening flanges along the top edge for extra torsional rigidity under load.• Profiled lifting arm allows

The JCB-TH33013 is a robust, low-profile and double-pump hydraulic trolley jack designed to offer a maximum lifting capacity of up to 3 tonnes in weight.Constructed with a high quality and heavy-duty steel frame, the JCB-TH33013 is capable of lifting SUVs, cars, light commercial vehicles and any other vehicle which requires high ground clearance up to 505mm in height.The JCB-TH33013’s chassis utilises an extra low-profile design, which allows the trolley jack to reach lower clearances, particularly useful for sports cars or vehicles with reduced ground clearance.Thanks to its integrated double-piston mechanism, the JCB-TH33013 is a quick-lift trolley jack, which will save you precious time an…

Features: Innovative Labor-Saving Design: Our Labor-Saving Arm Jack introduces a revolutionary solution for lifting, pressing, precise fastening, and control. It features an anti-decoupling design that prevents slippage by securing the plate effectively. Heavy-Duty Construction: Built to last, this tool is made of high-quality carbon steel, promising remarkable durability. With a lifting capacity of up to 120 kg, it offers virtually unlimited applications. Versatile Use: This is not just a jack%3B it's an all-in-one tool that makes the installation of doors, windows, and cabinets easier. It's also perfect for construction tasks like flooring and porch, deck, and frame building. Handheld

Low profile car jack 2.5T 80-360 mm BEST 10663 ✅ Capacity: 2.5 tons | ✅Low profile: 80mm | ✅ Length: 540 mm I ✅ Height with lowered arm (measured from the plate): 8 cmI ✅ Flooded with hydraulic oil Rating of our customers⭐️⭐️⭐️⭐️⭐️ ⭐️ Features of the lift ✔️ The lift allows you to lift an object weighing up to 2500 kg. ✔️ Perfect for a home garage as well as a professional workshop. ✔️ Perfect for sports cars with low suspension due to the low profile. ✔️Height of the tool with the arm lowered (measured from the plate) is 8 cm ✔️ The lift has wheels, making it more comfortable to use. Rear fixed, front swivel bearings ✔️ The construction of the device is reinforced with brackets, which translate…

Car Scissor Jack / Lift Jack With Ratchet Kit With L Wrench Quick Car Jack Sizes: 1 ton Suitable for car lift in home or garage Floor Car jack Suitable for Car, Van, SUV Car scissor jack with ratchet is a lightweight and compact tool suitable for emergency and breakdown- easy to store in a car's trunk or under a seat Wheel L-wrench universal. Extendable power lever up to 53 cm Necessary tool for car lifting and tyre change Speed ratchet - to enable you to make the lifting process easy and quick Quality Car Lift Scissor Jack for all type of cars Brand: alca Germany

High quality, ultra-strong bottle jack - designed for effortless lifting. Can be used vertically or angled to 3 degrees from a vertical position. Features and Benefits Features a wide, rugged base that provides excellent stability and strength Provides peace of mind - all critical stress points on the jacks are reinforced for added durability and dependability Cast iron bases with a steel cylinder housing and an adjusting notched saddle Fitted with an overload protection valve Typical Applications Suitable for lifting or positioning vehicles, machinery, houses and/or other building structures but after lifting, loads must be immediately supported by jack stands Standards Met Complies with the …

Fitted with overload valve. Dual-stage rams allow for longer travel. Lower retracted and higher extended heights. Base and reservoir machine welded for increased strength and eliminates leakage. Supplied with 3-piece handle.4 Tonne Telescopic Bottle Jack• Fitted with overload valve. • Dual-stage rams allow for longer travel.• Stage 1 capacity 7500kg.• Stage 2 capacity 4000kg.• Lower retracted and higher extended heights. • Base and reservoir machine welded for increased strength and eliminates leakage. • Supplied with 3-piece handle.• Model No. SJT4Model No: SJT4:Brand: Sealey:Capacity: 4 Tonne:Hydraulic Lift: 170mm:Maximum Height: 390mm:Minimum Height: 160mm:Nett Weight:

Trolley Jack / Max Load 2 t

Qualitative Materials：Constructed of heavy-duty steel, the meticulously crafted oil cylinder can reduce seal ring wear and improve service life. High wear resistance, high strength Professional Design: Flex head features a permanently molded rubber pad, interlocked to prevent separation. The oil that anti freezing in winter and high temperature resistant in summer, is suitable for a wider range of regions Safety Protection: The pump has an automatic overload system that if overloaded, it will automatically start to prevent damage to rams and equipment Sturdy Blow-Molded Carrying Case：Equipped with a blow molded suitcase, all components can be stored in a planned manner. It can also be

Bottle jack, with hydraulic unit, max. load 20 t, 4+ items. Supplied = assembled. Max. load = 20 t. Lifting range with lifting head = 235 - 440 mm. Lift = 145 mm. Weight = 10 kg. Overall height from - to = 235 - 440 mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can also be unscrewed by means of a thread. The bottle jack is a reliable tool in the workshop and as a vehicle